Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Optimization of Gas Turbine Cooling Hole Ramp Configuration via Multi-Fidelity AI/ML Model

Description du projet

Technologie de refroidissement pour les turbines à hydrogène

Les turbines à gaz sont largement utilisées dans la production d’électricité, l’aviation et divers processus industriels, et jouent un rôle clé dans l’économie européenne. Elles dépendent toutefois fortement des combustibles fossiles. Pour atteindre l’objectif climatique de l’UE pour 2030, à savoir réduire de 55 % les émissions de gaz à effet de serre et parvenir à la neutralité climatique d’ici 2050, les turbines à hydrogène offrent une alternative plus propre. Cependant, l’hydrogène brûle à des températures plus élevées que les autres carburants, ce qui pose des problèmes de refroidissement des aubes de turbine. Avec le soutien du programme Actions Marie Skłodowska-Curie, le projet OURLEM va améliorer la technolgie de refroidissement par film, qui consiste à injecter de l’air frais sur les surfaces des turbines. Il fera appel à des structures additives, telles que des rampes, à proximité des trous de refroidissement pour améliorer l’efficacité du refroidissement par film.

Objectif

Gas turbines play several important roles in Europe, contributing to various sectors of the economy. According to the Polaris Market report, the global gas turbine market was valued at 22.25 billion USD in 2021 and is expected to grow at a CAGR of 6.3% till 2030. At this huge global market size, since fossil fuels are burned in gas turbines, they release greenhouse gases, including CO2. Based on the 2030 EU Climate Target Plan, sets Europe on a responsible path to becoming climate neutral by 2050, greenhouse gas emissions should be cut by at least 55% by 2030. Hydrogen gas turbines offer several advantages over fossil fuels, making them an attractive option for clean and sustainable energy generation (zero emissions), helping to face climate change, and reducing air pollution. However, hydrogen burns at a higher temperature compared to other fuels, which poses challenges for turbine blade cooling and requires an efficient cooling technique to maintain blade integrity. Film cooling, by injecting cold air at discrete locations over the exposed surfaces through holes and slots, is one of the available technologies. Additive structures, such as ramps, near the exit of the cooling hole geometry can be used to improve the film-cooling effectiveness, thus increasing the gas turbine efficiency. The geometrical configuration of the upstream ramp can significantly affect the cooling effectiveness on the surface and the mixing between coolant and mainstream. Therefore, the ramp configuration should be carefully designed. In this project, this goal will be achieved through a multidisciplinary optimization approach, based on the combination of experiments and high-fidelity Large Eddy Simulations, making use of Artificial Intelligence and Machine Learning approaches. The outcome of the project will be an optimization tool and an optimized ramp to be applied on the cooling hole and expected to result in better thermal efficiency in the gas turbines and lower fuel consumption.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) HORIZON-MSCA-2024-PF-01

Voir tous les projets financés au titre de cet appel

Coordinateur

UNIVERSITA' DEGLI STUDI DI BERGAMO
Contribution nette de l'UE
€ 209 483,28
Coût total
Aucune donnée