Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

3DCOMPASS: Revolutionizing Solid-State Lithium Battery Manufacturing through Xolography Volumetric 3D Printing

Description du projet

Exploiter la lumière pour imprimer des architectures 3D complexes dans de nouveaux électrolytes à l’état solide

L’impression xolographique va au-delà de l’ajout séquentiel de couches en fabrication additive: elle utilise la lumière pour produire des structures 3D à haute résolution directement via un processus de polymérisation localisé. Avec le soutien du programme Actions Marie Skłodowska-Curie, le projet 3DCOMPASS entend développer un système d’impression 3D xolographique d’électrolytes solides polymères et céramiques. Il pourrait révolutionner la production de batteries au lithium à l’état solide de forme complexe. Le projet développera les matériaux appropriés, optimisera le processus d’impression, produira des électrolytes et les utilisera pour assembler des demi-cellules et des cellules complètes. La démonstration de la nouvelle classe de matériaux imprimables par xolographie inaugurera une production rapide et évolutive de batteries au lithium à l’état solide de qualité supérieure.

Objectif

3DCOMPASS aims to revolutionize the production of complex shaped all-solid-state lithium batteries (ASSLB) using Xolography volumetric 3D printing, a technology that offers superior speed, resolution, and freedom of shape compared to traditional manufacturing techniques including conventional 3D printing methods. The project focuses on the development of Xolography 3D printing for solid state electrolytes, both polymeric and ceramic, enabling the efficient fabrication of solid-state electrolytes with unexplored architectures. 3DCOMPASS will firstly develop containing Li-conductors and suitable for Xolography process with low optical density (<0.22 for 1cm of path at 405 nm), high viscosity (10-60 Pa s) and high polymerization rates. In a second step the printing process will be optimized in relation to resins formulations to obtain the desired speed (55 mm3/h) and resolution (5-20 µm) impossible to achieve with traditional 3D printing techniques. Finally complex shaped electrolytes will be fabricated by Xolography with tailored architectures to: i) enhance the interfacial area with the electrodes, ii) allow high cathode loadings, iii) increase the critical current density vs. Li-metal. The produced electrolytes will be used to assemble half and full cells with Li-metal as anode and Mn-doped LFP as cathode with the following expected performances: ionic conductivity of the electrolytes >10-4 S cm-1 at room temperature, capacity >400Wh/kg, high resistance to dendrite growth with a critical current density > 0.5 mA/cm2. 3DCOMPASS will provide a new class of materials printable by Xolography and at the same time open the door to a new generation of ASSLB with superior performances allowed by micrometric scale architectures possible to produce in a fast and scalable way. Furthermore, the career of the candidate is expected to largely benefit from the present proposal thanks to its training in a strategic field (3D printing for ASSLB).

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) HORIZON-MSCA-2024-PF-01

Voir tous les projets financés au titre de cet appel

Coordinateur

FUNDACIO INSTITUT DE RECERCA EN ENERGIA DE CATALUNYA
Contribution nette de l'UE
€ 194 074,56
Coût total
Aucune donnée

Partenaires (1)