Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

3DCOMPASS: Revolutionizing Solid-State Lithium Battery Manufacturing through Xolography Volumetric 3D Printing

Descrizione del progetto

Sfruttare la luce per stampare complesse architetture 3D in nuovi elettroliti allo stato solido

La stampa olografica va oltre l’aggiunta sequenziale di strati nella produzione additiva, utilizzando la luce per produrre strutture 3D ad alta risoluzione direttamente attraverso un processo di polimerizzazione localizzata. Con il sostegno del programma di azioni Marie Skłodowska-Curie, il progetto 3DCOMPASS intende sviluppare un sistema per la stampa 3D xolografica di elettroliti polimerici e ceramici allo stato solido. Potrebbe rivoluzionare la produzione di batterie al litio allo stato solido di forma complessa. Il progetto svilupperà i materiali appropriati, ottimizzerà il processo di stampa, produrrà elettroliti e li utilizzerà per assemblare celle mezze e complete. La dimostrazione della nuova classe di materiali stampabili mediante xolografia aprirà la strada a una produzione rapida e scalabile di batterie al litio allo stato solido di qualità superiore.

Obiettivo

3DCOMPASS aims to revolutionize the production of complex shaped all-solid-state lithium batteries (ASSLB) using Xolography volumetric 3D printing, a technology that offers superior speed, resolution, and freedom of shape compared to traditional manufacturing techniques including conventional 3D printing methods. The project focuses on the development of Xolography 3D printing for solid state electrolytes, both polymeric and ceramic, enabling the efficient fabrication of solid-state electrolytes with unexplored architectures. 3DCOMPASS will firstly develop containing Li-conductors and suitable for Xolography process with low optical density (<0.22 for 1cm of path at 405 nm), high viscosity (10-60 Pa s) and high polymerization rates. In a second step the printing process will be optimized in relation to resins formulations to obtain the desired speed (55 mm3/h) and resolution (5-20 µm) impossible to achieve with traditional 3D printing techniques. Finally complex shaped electrolytes will be fabricated by Xolography with tailored architectures to: i) enhance the interfacial area with the electrodes, ii) allow high cathode loadings, iii) increase the critical current density vs. Li-metal. The produced electrolytes will be used to assemble half and full cells with Li-metal as anode and Mn-doped LFP as cathode with the following expected performances: ionic conductivity of the electrolytes >10-4 S cm-1 at room temperature, capacity >400Wh/kg, high resistance to dendrite growth with a critical current density > 0.5 mA/cm2. 3DCOMPASS will provide a new class of materials printable by Xolography and at the same time open the door to a new generation of ASSLB with superior performances allowed by micrometric scale architectures possible to produce in a fast and scalable way. Furthermore, the career of the candidate is expected to largely benefit from the present proposal thanks to its training in a strategic field (3D printing for ASSLB).

Campo scientifico (EuroSciVoc)

Parole chiave

Programma(i)

Argomento(i)

Meccanismo di finanziamento

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Vedi tutti i progetti finanziati nell’ambito di questo schema di finanziamento

Invito a presentare proposte

(si apre in una nuova finestra) HORIZON-MSCA-2024-PF-01

Vedi tutti i progetti finanziati nell’ambito del bando

Coordinatore

FUNDACIO INSTITUT DE RECERCA EN ENERGIA DE CATALUNYA
Contributo netto dell'UE
€ 194 074,56
Indirizzo
C/ JARDINS DE LES DONES DE NEGRE 1
08930 Sant Adria De Besos
Spagna
Regione
Este Cataluña Barcelona
Tipo di attività
Research Organisations
Collegamenti
Costo totale
Nessun dato

Partner (1)