Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS

DYNAMIC AIRCRAFT ENERGY MANAGEMENT IN ATC-COMPLEX ENVIRONMENTS

Project description

Re-routing the story: carbon-neutral air transport

Aviation faces a critical challenge in meeting its carbon neutrality goal by 2050, particularly within dense terminal manoeuvring areas (TMAs) where inefficient flight paths and frequent controller interventions increase fuel burn, noise and emissions. The EU-funded DYN-MAX project will address this by introducing four interoperable solutions: enhanced air traffic control tools, advanced flight management system functions, extended digital communications and new geometric TMA procedures. These innovations aim to reduce flight uncertainty and tactical interventions, enabling aircraft to perform near-idle descents with minimal drag. Ultimately, DYN-MAX’s goal is to improve vertical flight efficiency by 10-20 %, significantly lowering the sector's environmental footprint while simultaneously maintaining operational safety and airspace capacity for the future of European air transport.

Objective

Aviation is impacted by and has an impact on climate change. This is prompting the aviation stakeholders to step up its efforts with the goal of becoming carbon neutral by 2050. Achieving this ambition requires contributions from all parts of the air transport system, including a step change in how trajectories are managed in dense terminal manoeuvring areas (TMAs). Today, ATM procedures and controller interventions often introduce level-off segments and speed-brake usage, degrading Vertical Flight Efficiency (VFE) and increasing fuel burn, emissions and noise. In an ideal descent, the aircraft would initiate descent at the optimum top-of-descent point, fly continuously at idle thrust and minimise drag by delaying high-lift device deployment until necessary.
DYN-MAX addresses this challenge with four interoperable solutions that reduce uncertainty in flight predictability and enable environmentally sustainable TMA operations. Solution 1 develops enhanced ATC tools and procedures (eAMAN, eORD) to provide earlier and more accurate arrival route information to the aircraft, reducing later tactical interventions. Solution 2 introduces advanced Flight Management System functions such as dynamic trajectory recomputation, secondary flight plan use for descent planning, and optimised energy management cues enabling near-idle descents and support stabilised approaches. Solution 3 extends CPDLC use in the TMA with EXPECT route messages, ATC phraseologies and procedures. Solution 4 develops Geometric TMA procedures, removing the barometric transition layer to enhance vertical planning, capacity and efficiency.
Together, these solutions minimise the flights environmental footprint in the TMA while maintaining capacity and improving safety. Expected benefits include a 10–20% improvement in VFE, fewer level segments, reduced thrust and drag, and higher rates of stabilised approaches. Each solution is independently deployable, yet offers maximum benefit when integrated.

Fields of science (EuroSciVoc)

Keywords

Programme(s)

Topic(s)

Funding Scheme

HORIZON-JU-RIA - HORIZON JU Research and Innovation Actions

See all projects funded under this funding scheme

Call for proposal

(opens in new window) HORIZON-SESAR-2025-DES-IR-02

See all projects funded under this call

Coordinator

DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV
Net EU contribution
€ 2 255 720,03
Total cost
No data

Participants (6)