Obiettivo The objective of this project was to design a new distributed system for inspection and quality control in flexible manufacturing systems (DASIQ). DASIQ was to comprise three subsystems: inspection of surface finish, coarse dimensional control and high-precision inspection. The objectives were to: -design the system architecture and define the distributed subsystems and interfaces -design inspection subsystems capable of interfacing with most types of existing sensors for data acquisition and information processing -integrate already existing optical inspection techniques -provide diagnosis and alarms for the FMS management system, with special attention paid to the interfaces with CAD. The objective of this project was to design a new distributed system for inspection and quality control in flexible manufacturing systems (DASIQ). DASIQ was to comprise 3 subsystems inspection of surface finish, coarse dimensional control and high precision inspection. The objectives were to: design the system architecture and define the distributed subsystems and interfaces; design inspection subsystems capable of interfacing with most types of existing sensors for data acquisition and information processing; integrate already existing optical inspection techniques; and provide diagnosis and alarms for the flexible manufacturing system (FMS) management system, with special attention paid to the interfaces with computer aided design (CAD). The design of the different inspection subsystemswas completed.The design of the different inspection subsystems was completed, but the project had to be terminated after three years due to withdrawal of one of the partners. Campo scientifico ingegneria e tecnologiaingegneria elettrica, ingegneria elettronica, ingegneria informaticaingegneria elettronicasistemi di controlloingegneria e tecnologiaingegneria elettrica, ingegneria elettronica, ingegneria informaticaingegneria elettronicasensoriscienze naturaliinformatica e scienze dell'informazionescienza dei datitrattamento dei dati Programma(i) FP1-ESPRIT 1 - European programme (EEC) for research and development in information technologies (ESPRIT), 1984-1988 Argomento(i) Data not available Invito a presentare proposte Data not available Meccanismo di finanziamento Data not available Coordinatore Société d'Applications Générales d'Électricité et de Mécanique Indirizzo 6 avenue d'iena 75783 Paris Francia Mostra sulla mappa Contributo UE Nessun dato Partecipanti (4) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto Commissariat à l'Energie Atomique (CEA) Francia Contributo UE € 0,00 Indirizzo Centre d'études de grenoble 17 avenue des martyrs 38041 Grenoble Mostra sulla mappa Altri finanziamenti Nessun dato Microtecnica SpA Italia Contributo UE € 0,00 Indirizzo Via madama cristina 147 10126 Torino Mostra sulla mappa Altri finanziamenti Nessun dato Universität Hannover Germania Contributo UE € 0,00 Indirizzo Nienburger straße 17 30167 Hannover Mostra sulla mappa Altri finanziamenti Nessun dato VISITEC Belgio Contributo UE € 0,00 Indirizzo Rue de la boverie 4100 Seraing Mostra sulla mappa Altri finanziamenti Nessun dato
