Developing the world’s first quantum modem

Projektinformationen

QModem

ID Finanzhilfevereinbarung: 190109269

DOI

10.3030/190109269

Projekt abgeschlossen

EK-Unterschriftsdatum 2 September 2022

Startdatum 1 Juli 2022

Enddatum 30 Juni 2024

Finanziert unter

• The European Innovation Council (EIC)

Gesamtkosten

€ 3 738 125,00

EU-Beitrag

€ 2 500 000,00

Koordiniert durch

QPHOX BV
Netherlands

Periodic Reporting for period 2 - QModem (Developing the world’s first quantum modem)

Berichtszeitraum: 2023-07-01 bis 2024-06-30

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

QphoX is developing the technology that will enable quantum computers to scale to commercial success and usher in the era of small scale, high-performance quantum computers. This challenge has thus far proven elusive even for the most advance quantum computing companies. By optically controlling qubits and by creating remote entanglement links between distantly separated quantum processors, the company presents the first viable solution for scaling the performance of today’s most advanced quantum computers through connectivity and parallelisation. With the accelerating pace of development of both optical quantum networks and microwave quantum processors, QphoX’s technology will play an indispensable role in bridging these technologies, serving as the gateway to scalable quantum computing.

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

Microwave-to-optics transduction is emerging as a vital technology for scaling quantum computers and quantum networks. To establish useful entanglement links between qubit processing units, several key conditions have to be simultaneously met: the transducer must add less than a single quantum of input referred noise and operate with high-efficiency, as well as large bandwidth and high repetition rate. We have developed a new design for an integrated transducer based on a planar superconducting resonator coupled to a silicon photonic cavity through a mechanical oscillator made of lithium niobate on silicon. During the first phase of the project, we have designed, fabricated and experimentally demonstrated the unique performance and potential of our novel transducer platform for simultaneously realizing all of the above conditions, measuring added noise that is limited to a few photons, transduction efficiencies as high as 0.9%, with a bandwidth of 14.8 MHz and a repetition rate of up to 100 kHz. Our device couples directly to a 50-Ω transmission line and can easily be scaled to a large number of transducers on a single chip, paving the way for distributed quantum computing. Device performance is already at the point of enabling qubit readout and control through optical channels, as well as monitoring of ultra-low power microwave signals in the cryogenic environment. During the second phase of the project, we have improved the performance of our transducer, including through increased electromechanical efficiency. This has allowed us to use the transducer to perform optical readout of a superconducting qubit, measured microwave power down to 100's of aW through a pilot with a quantum computing company.

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

QphoX has been able to demonstrate the ability to simultaneously realize the key performance parameters for microwave-to-optics transduction in a single device. Next steps will include further improvements on device performance and implementation of a scalable, commercially viable platform. Some of the main results include: optical readout of a superconducting qubit, jointly with Rigetti Computing, as well as a demonstration of our transducer to upconvert microwave pulses at the single photon level.

QphoX's quantum transducer