Obiettivo
The objectives are to investigate and develop the potential of the e-beam plus CAR route for a variety of critical applications, as represented by five carefully selected industrial demonstrators. The most important of these is advanced CMOS technology, and the critical dimensions targeted by the project reflect the significance of this application. Optimised e-beam nanolithography processes will be developed for 150 nm (1 Gbit and below), followed by 100 nm prototype processes (4 Gbit). The work will extend to 30 nm resolution, recognising the potential for quantum device applications.
At the beginning of the project, the precise industrial role to be played by e-beam lithography has not been firmly established and several options are open. There is, for example, a possibility that direct write fast e-beam lithography would be used for the 1 Gbit DRAM generation at 180 nm.
It is more likely however that deep ultra violet technology will be used in production for this generation and that e-beam direct write will be used for quick turn-around prototyping for both DRAM and advanced ASICs. For the 4 Gbit generation at 120 nm and beyond, there is much greater uncertainty, with some interest still in X Ray lithography. Direct write e-beam lithography remains the technology of choice for quantum device R & D with requirements typically down to 30 nm.
The industrial demonstrators have been selected to reflect these options and will be completed with industrial collaboration. To ensure the relevance to industry of the demonstrators and the rest of the technical work packages, industrial researchers will serve on the Project Management Committee to help with the detailed steering and orientation of the project as it progresses.
In summary, the overall objective and result of the project is to significantly advance the state-of-the-art in e-beam nanolithography using chemically amplified resists and to establish its ultimate potential for industrial nanolithography needs in the next century.
This will be achieved through a series of five technical work packages with the following major deliverables:
- Optimised processes for e-beam lithography to 150 nm CD resolution - for one positive tone and one negative tone commercial CAR.
- Optimised 150 nm process as above for the novel EPR negative tone resist (to include post exposure bake cycles and specification of all other key variables).
- Optimised formulation for EPR resist.
- Prototype processes as above to 100 nm resolution.
- Experimental processes to 30 nm for quantum device fabrication.
- Determination of resolution limits for selected CARs.
- Measured results of acid diffusion effects and their consequences for resolution and proximity effects.
- Upgraded resist exposure and development software for CARs to include acid diffusion.
- Upgrade of CAPROX proximity correction software to include acid diffusion and resist process parameter effects - including effects on resist due to pattern transfer processes specific to the five industrial demonstrators.
These deliverables contain several key tools which are essential for future industrial nanolithography needs.
A series of four demonstrators will be undertaken applying the new e-beam nanolithography tools and processes to the key industrial applications, focusing upon advanced CMOS and optoelectronics. A series of industrial evaluation trials will be undertaken using the CAR process deliverableincluding the new EPR resist, for advanced CMOS applications including 1 Gbit DRAM technology. These will be performed on a quick turnaround basis to designs and specifications from the industry. Take-up and exploitation of the results are ensured through links with the European CMOS community, as represented on the Project Management Committee by Siemens and GEC Plessey. Further exploitation will take place through a quick turn-around e-beam prototyping service using the nanolithography tools resulting from the project.
The NANCAR project is a comprehensive experimental and theoretical study of the use of chemically amplified resists (CAR) for a e-beam nanolithography. All the major commercially available resists will be included, together with the novel EPR prototype negative resist from IMEL/Demokritos.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali informatica e scienze dell'informazione software
- scienze naturali scienze fisiche elettromagnetismo ed elettronica optoelettronica
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Parole chiave
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
OX11 0QX Didcot
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.