Objectif PASO aims at advancing manufacturing management technology in a commercially attractive area.Since the 1980ies manufacturers have been shifting from functional production arrangements towards product-based manufacturing shops and smaller organisational entities (lean management and group technology). These autonomous, small production shops and cells need visual, user-friendly scheduling and control systems, which can be customised and integrated with internal and external supplier networks. Other requirements like a more frequently restructuring of production facilities add further to this need.Today's tools for production planning and scheduling are not flexible enough, as most of them are fixed to a certain production structure. PASO aims at developing a software architecture for shop-control (reactive scheduling) which is independent of the production structure. It therefore should be possible to support almost any structure, organisation and scheduling algorithm.The innovative contribution of PASO is not based on sophisticated algorithms but rather on a new, flexible software concept with benefits for both the end-user and the system provider. A prototype shop-control system based on the envisaged shop-control kernel, as well as a set of shell modules will demonstrate and validate the feasibility of the concept.The advantages of the targeted system can be summarised as follows:- customisable in a very high degree, allowing incremental upsizing;- low cost system,- easy to use, simple, with illustrative user interface,- simplified system administration (only PC know-how required);- expandability and openings; Champ scientifique natural sciencescomputer and information sciencessoftwareengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systemssocial scienceseconomics and businesseconomicsproduction economics Programme(s) FP4-ESPRIT 4 - Specific research and technological development programme in the field of information technologies, 1994-1998 Thème(s) 8.12 - Intelligent Production Systems and Equipment Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur A. Ahistrom Corporation, Shistrom Machinery, Savonlinna Works Contribution de l’UE Aucune donnée Adresse 57101 Savonlinna Finlande Voir sur la carte Coût total Aucune donnée Participants (8) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire Asociacion de Investigacion Tekniker Espagne Contribution de l’UE Aucune donnée Adresse Otaola 20 20600 Eibar Voir sur la carte Coût total Aucune donnée Ccp - Centre de Cim de Porto Portugal Contribution de l’UE Aucune donnée Adresse Rua De Aurelia De Sousa 171 4000 Porto Voir sur la carte Coût total Aucune donnée Extech Irlande Contribution de l’UE Aucune donnée Adresse Lismoyle House, Merchants Road Galway Voir sur la carte Coût total Aucune donnée Institute of Production Engineering and Machine Tools (Ifw) Allemagne Contribution de l’UE Aucune donnée Adresse Schlosswender Strasse 5 30159 Hannover Voir sur la carte Coût total Aucune donnée Jaz-Zubiaurre Sa Espagne Contribution de l’UE Aucune donnée Adresse Asuerreka 7 20600 Eibar Voir sur la carte Coût total Aucune donnée Telleria, Valdubieco, Azaola Espagne Contribution de l’UE Aucune donnée Adresse Zeharkalea S/N 48260 Ermua Voir sur la carte Coût total Aucune donnée Vtt Automation Finlande Contribution de l’UE Aucune donnée Adresse Espoo Voir sur la carte Coût total Aucune donnée Wm-Data Systia Oy Finlande Contribution de l’UE Aucune donnée Adresse Ilmarisentie 20 15200 Lahti Voir sur la carte Coût total Aucune donnée