Cel PASO aims at advancing manufacturing management technology in a commercially attractive area.Since the 1980ies manufacturers have been shifting from functional production arrangements towards product-based manufacturing shops and smaller organisational entities (lean management and group technology). These autonomous, small production shops and cells need visual, user-friendly scheduling and control systems, which can be customised and integrated with internal and external supplier networks. Other requirements like a more frequently restructuring of production facilities add further to this need.Today's tools for production planning and scheduling are not flexible enough, as most of them are fixed to a certain production structure. PASO aims at developing a software architecture for shop-control (reactive scheduling) which is independent of the production structure. It therefore should be possible to support almost any structure, organisation and scheduling algorithm.The innovative contribution of PASO is not based on sophisticated algorithms but rather on a new, flexible software concept with benefits for both the end-user and the system provider. A prototype shop-control system based on the envisaged shop-control kernel, as well as a set of shell modules will demonstrate and validate the feasibility of the concept.The advantages of the targeted system can be summarised as follows:- customisable in a very high degree, allowing incremental upsizing;- low cost system,- easy to use, simple, with illustrative user interface,- simplified system administration (only PC know-how required);- expandability and openings; Dziedzina nauki natural sciencescomputer and information sciencessoftwareengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systemssocial scienceseconomics and businesseconomicsproduction economics Program(-y) FP4-ESPRIT 4 - Specific research and technological development programme in the field of information technologies, 1994-1998 Temat(-y) 8.12 - Intelligent Production Systems and Equipment Zaproszenie do składania wniosków Data not available System finansowania CSC - Cost-sharing contracts Koordynator A. Ahistrom Corporation, Shistrom Machinery, Savonlinna Works Wkład UE Brak danych Adres 57101 Savonlinna Finlandia Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (8) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko Asociacion de Investigacion Tekniker Hiszpania Wkład UE Brak danych Adres Otaola 20 20600 Eibar Zobacz na mapie Koszt całkowity Brak danych Ccp - Centre de Cim de Porto Portugalia Wkład UE Brak danych Adres Rua De Aurelia De Sousa 171 4000 Porto Zobacz na mapie Koszt całkowity Brak danych Extech Irlandia Wkład UE Brak danych Adres Lismoyle House, Merchants Road Galway Zobacz na mapie Koszt całkowity Brak danych Institute of Production Engineering and Machine Tools (Ifw) Niemcy Wkład UE Brak danych Adres Schlosswender Strasse 5 30159 Hannover Zobacz na mapie Koszt całkowity Brak danych Jaz-Zubiaurre Sa Hiszpania Wkład UE Brak danych Adres Asuerreka 7 20600 Eibar Zobacz na mapie Koszt całkowity Brak danych Telleria, Valdubieco, Azaola Hiszpania Wkład UE Brak danych Adres Zeharkalea S/N 48260 Ermua Zobacz na mapie Koszt całkowity Brak danych Vtt Automation Finlandia Wkład UE Brak danych Adres Espoo Zobacz na mapie Koszt całkowity Brak danych Wm-Data Systia Oy Finlandia Wkład UE Brak danych Adres Ilmarisentie 20 15200 Lahti Zobacz na mapie Koszt całkowity Brak danych