Obiettivo
Carbon nanotubes are materials with a set of unique electrical, mechanical, surface and thermal properties. Yet their adoption in mainstream applications has been limited by mass production and device integration. This project develops the first 300mm wafer-scale equipment for production of carbon nanotubes on surfaces. The project will cover the design, engineering, process control, quality assurance, qualification and process development. It will develop applications in cathodes for time resolved X-ray sources for X-ray tomography, cathodes for high power microwave amplifiers, interconnects for VLSI, thermal management surfaces, low stiction surfaces for micro-fluidic channels and filters, wafer scale fabrication of spin valve devices, and sensor surfaces for integrated sensors on CMOS.
Campo scientifico
Programma(i)
Argomento(i)
Invito a presentare proposte
FP7-NMP-2008-LARGE-2
Vedi altri progetti per questo bando
Meccanismo di finanziamento
CP-IP - Large-scale integrating projectCoordinatore
CB2 1TN Cambridge
Regno Unito
Mostra sulla mappa
Partecipanti (11)
52134 Herzogenrath
Mostra sulla mappa
20099 HAMBURG
Mostra sulla mappa
3001 Leuven
Mostra sulla mappa
92190 MEUDON
Mostra sulla mappa
78140 VELIZY VILLACOUBLAY
Mostra sulla mappa
CB4 0DL Cambridge
Mostra sulla mappa
80539 Munchen
Mostra sulla mappa
10623 Berlin
Mostra sulla mappa
2800 Kongens Lyngby
Mostra sulla mappa
8092 Zuerich
Mostra sulla mappa
00185 Roma
Mostra sulla mappa