Objetivo
The Micro(wave)- NMR project involves the coupling of continuous flow microwave (MW) chemical reactions with small-volumes Nuclear Magnetic Resonance (NMR) techniques. The aim is the on-line monitoring of a chemical process under continuous-flow microwave irradiation by NMR with the main goal of optimizing a process within less time and lower cost.
On one hand, the project combines the unique heating mechanism of microwave irradiation with the safety, reproducibility and facile automation of continuous flow techniques. On the other hand, microcoils NMR will be used as the detection method providing the detection of mass-limited samples as well as more complete structural information than any other analytical technique. It is the first time than NMR will be coupled to the microwave technology for an on-line analysis of the reaction product. For the achievement of the objectives, regarding the microwave set-up, a continuous-flow microwave cell has to be designed. The cell will contain capillary-sized reaction tubes defining a small heated coil that winds in and out of the microwave cavity. Reaction mixtures can be flowed through defining a low reaction volume, in the µL range in order to optimize a chemical process with lower cost. Regarding the NMR set-up, microfluidic chips containing a radiofrequency microcoil (NMR-chip) will be used as the detection method and hyphenated to the microwave reactor by means of capillaries. The use of microcoils for NMR provides a sensitivity enhancement, enabling the detection of samples in the picomole range. Microcoils provide higher signals when the detection volume matches the diameter coil, thus, the detection volume will be very small and in the same range than the reaction volume for a better analysis. The NMR-chip concept has been designed and optimized during my previous Marie Curie Fellowship. The proposed project allows me to share the knowledge acquired during my current Fellowship with my University of origin.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véase: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véase: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- ingeniería y tecnologíaingeniería eléctrica, ingeniería electrónica, ingeniería de la informacióningeniería de la informacióntelecomunicaciónradiotecnologíaradiofrecuencia
- ingeniería y tecnologíaingeniería eléctrica, ingeniería electrónica, ingeniería de la informacióningeniería de la informacióntelecomunicaciónradiotecnologíatecnología de microondas
- ciencias socialessociologíarelaciones laboralesautomatización
- ciencias naturalesciencias químicas
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Palabras clave
Convocatoria de propuestas
FP7-PEOPLE-ERG-2008
Consulte otros proyectos de esta convocatoria
Régimen de financiación
MC-ERG -Coordinador
13071 Ciudad Real
España