Skip to main content
European Commission logo
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-06-18

Microelectronic Single-Photon 3D Imaging Arrays\nfor low-light high-speed Safety and Security Applications

Descrizione del progetto


Photonics
3D cameras, based on the measurement of the Time-of-Flight of single photons by means of Single-Photon Avalanche Diode imagers, for automotive safety driving and security surveillance application
MiSPIA will develop beyond state-of-the-art photonics technology for array imagers of smart-pixels able to detect single photons. Intelligent in-pixel pre-processing will simultaneously provide ultra high sensitivity (single-photon level), very high frame-rate (up to 200,000fps) and advanced multi-spectral (300-900nm) three-dimensional (3D) distance ranging and two-dimensional (2D) imaging of fast moving objects. MiSPIA detectors will be used in two key applications: long-range (200-1,000m) 2D and 3D active identification in low light level surveillance operations; and very fast (over 200fps) short-range (10-50m) 3D monitoring in automotive pre-crash safety systems. Instead of (slow and noisy) CCDs and CMOS active pixels (with poor sensitivity and noisy electronics), MiSPIA will exploit the ultimate performances of truly-single photon detectors: the Single-Photon Avalanche Diodes (SPAD).MiSPIA imagers will be based on four different SPAD smart-pixels: “photon-counting” pixels for 2D imaging; LIDAR pixels for 3D direct “time-of-flight” (dTOF); two different phase-sensitive pixels for 3D indirect time-of-flight (iTOF) depth acquisitions. Full-size imager chips will be manufactured, characterized and eventually integrated into two 3D ranging cameras deployed into the two end-users applications for validation.MiSPIA technologies will be both highly-advanced and cost-effective: a high-voltage 0.35µm CMOS processing for front-side illuminated imagers; and a new flipped-chip Silicon-on-Insulator (SOI) CMOS technology for back-side illuminated imagers. Both will prove beyond state-of-the art co-integration of photonic SPAD detectors and CMOS microelectronics for intelligent and dense 2D imaging and 3D ranging high-performance cameras. Such cameras will provide imaging at the quantum limit and on-chip pre-processing at the most effective speed at a drastic reduction of manufacturing costs, down to 5€ per imager chip.The developments of the MiSPIA Project will be published on the official website www.mispia.eu.

MiSPIA will develop beyond state-of-the-art photonics technology for array imagers of smart-pixels able to detect single photons. Intelligent in-pixel pre-processing will simultaneously provide ultra high sensitivity (single-photon level), very high frame-rate (up to 200,000fps) and advanced multi-spectral (300-900nm) three-dimensional (3D) distance ranging and two-dimensional (2D) imaging of fast moving objects. MiSPIA detectors will be used in two key applications: long-range (200-1,000m) 2D and 3D active identification in low light level surveillance operations; and very fast (over 200fps) short-range (10-50m) 3D monitoring in automotive pre-crash safety systems. Instead of (slow and noisy) CCDs and CMOS active pixels (with poor sensitivity and noisy electronics), MiSPIA will exploit the ultimate performances of truly-single photon detectors: the Single-Photon Avalanche Diodes (SPAD).MiSPIA imagers will be based on four different SPAD smart-pixels: "photon-counting" pixels for 2D imaging; LIDAR pixels for 3D direct "time-of-flight" (dTOF); two different phase-sensitive pixels for 3D indirect time-of-flight (iTOF) depth acquisitions. Full-size imager chips will be manufactured, characterized and eventually integrated into two 3D ranging cameras deployed into the two end-users applications for validation.MiSPIA technologies will be both highly-advanced and cost-effective: a high-voltage 0.35µm CMOS processing for front-side illuminated imagers; and a new flipped-chip Silicon-on-Insulator (SOI) CMOS technology for back-side illuminated imagers. Both will prove beyond state-of-the art co-integration of photonic SPAD detectors and CMOS microelectronics for intelligent and dense 2D imaging and 3D ranging high-performance cameras. Such cameras will provide imaging at the quantum limit and on-chip pre-processing at the most effective speed at a drastic reduction of manufacturing costs, down to 5€ per imager chip.The developments of the MiSPIA Project will be published on the official website www.mispia.eu.

Invito a presentare proposte

FP7-ICT-2009-5
Vedi altri progetti per questo bando

Meccanismo di finanziamento

CP - Collaborative project (generic)

Coordinatore

POLITECNICO DI MILANO
Contributo UE
€ 808 260,00
Indirizzo
PIAZZA LEONARDO DA VINCI 32
20133 Milano
Italia

Mostra sulla mappa

Regione
Nord-Ovest Lombardia Milano
Tipo di attività
Higher or Secondary Education Establishments
Contatto amministrativo
Franco Zappa (Prof.)
Collegamenti
Costo totale
Nessun dato

Partecipanti (6)