Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-18

Development of a novel autonomous vehicle significantly reducing costs related to subsea sensors deployment and recovery

Objetivo

There is a distinct need for an improved method for accurate and inexpensive deployment and retrieval of seabed sensors and equipment. The AutoDrop will be hydro dynamically designed in order to glide through the water experiencing a minimum of drag. The rudders will maintain stability and change the direction if desired. It is important that the time used by the AutoDrop to travel from the surface to the seabed is kept at a minimum to maximize accuracy. A short time descending requires a heavy weight load attached to the unit, while releasing the weight load should lead to high degree of buoyancy to enable rapid ascent. Manner of operation: Prior to deployment operation, the units are programmed with a destination on the seabed and a location on the surface. The unit uses the surface location as a reference in order to navigate to the target area. As the unit is dropped into the water, it gains momentum until terminal velocity is reached. The navigation system calculates the position of the unit relative to the target and, if necessary, adjusts the rudders to change direction. A gentle landing further increases the chances of a successful deployment. The sensors transported down to the seabed by the AutoDrop units perform their task over a defined time period. When it is time to ascend, either dictated by a programmed time limit or by a broadcasted signal from top side, the AutoDrop units release their weight load or in other ways change their buoyancy. The buoyancy causes the units to ascend towards the surface. The navigation system will be applied on the way up and may be programmed to form clusters on the surface, thus simplifying the retrieval process. Clusters are easy to form by sending a number of units to the same surface location. At surface the AutoDrop units will have the possibility to radio its GPS coordinates to a service vessel.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

FP7-SME-2010-1
Consulte otros proyectos de esta convocatoria

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

BSG-SME - Research for SMEs

Coordinador

Abyssus Marine Services AS
Aportación de la UE
€ 380 924,25
Dirección
Stroket (3de etg) 8
1383 Asker
Noruega

Ver en el mapa

Región
Norge Oslo og Viken Viken
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (10)

Mi folleto 0 0