Obiettivo
Today’s design and certification procedures of aircrafts are mainly based on conservative static loading which leads to additional weight and, potentially, to a structurally unsafe aircraft. The overall objective of the DAEDALOS project is to develop methods and procedures to determine dynamical loads considering the effects of dynamic buckling, material damping and mechanical hysteresis during aircraft service.
Use of advanced analysis and design principles from DAEDALOS will partly remove the uncertainty and the conservatism of today’s design and certification procedures. DAEDALOS work will hence form the basis for improved common design practices by:
1. Determining accurate dynamic load spectra to be used for structural sizing.
2. Reducing the added weight of aircraft structural components due to conservative design in compliance with quasi-static loads by using more realistic equivalent dynamic loads. This goal will be achieved through improved introduction of the structure damping capacity and detailed analysis.
3. Increasing structural safety using more realistic loading scenarios.
4. Establishing new procedures for the definition of loads to be used during aircraft design and certification by authorities.
Campo scientifico
Argomento(i)
Invito a presentare proposte
FP7-AAT-2010-RTD-1
Vedi altri progetti per questo bando
Meccanismo di finanziamento
CP-FP - Small or medium-scale focused research projectCoordinatore
20133 Milano
Italia
Mostra sulla mappa
Partecipanti (13)
Partecipazione conclusa
21040 VENEGONO SUPERIORE
Mostra sulla mappa
00195 Roma
Mostra sulla mappa
01510 MINAMO MENOR ALAVA
Mostra sulla mappa
2628 AL DELFT
Mostra sulla mappa
601 90 Brno Stred
Mostra sulla mappa
51147 Koln
Mostra sulla mappa
164 90 Stockholm
Mostra sulla mappa
70100 Lod
Mostra sulla mappa
199 02 PRAHA
Mostra sulla mappa
30167 Hannover
Mostra sulla mappa
52062 Aachen
Mostra sulla mappa
2502 BIENNE
Mostra sulla mappa
32000 Haifa
Mostra sulla mappa