Obiettivo
Hot stamping allows producing complex geometries from high performing materials. The use of this technique is increasing among automotive manufacturers because of the possibility to reduce weight without compromising with performance.
The aim of this study is to tailor the press hardening technique to fit the materials and demands of the turbofan engine, hoping to reduce weight, waste, machining and cost. Aerospace steel grades has not previously been used in press hardening. The possibilities and limitations of these new materials will be thoroughly examined as well as the benefits using this manufacturing technique compared to conventional methods.
A selection of aero space grade steels will be characterized to find the material best suited for press hardening. For this material a thermo-viscoplastic material model will be created. Using this model geometries from the turbofan engine, suited for press hardening, will be optimized and the feasibility of forming these details investigated. The first of the geometries is a sheet metal disc. In this proposal it is suggested to also investigate one of the flow surfaces and a guide vane. To validate the simulation process and the prediction of detail quality from the forming analysis physical parts of the disc and the guide vane will be produced.
For the disc and the guide vane benefits using near-net-shape blanks will be investigated. A method to achieve non uniform blanks is rolling. Flat rolling is majorly done to produce a large amount of standard strip/plate. Flat rolling into a shape is not widely used but it has a large potential to save material and machining by rolling a Near-net-shape product. The guide vane will be manufactured using this technique.
Also a technical study of serial production will be performed to compare the new production process to conventional design and manufacturing methods with regards to detail quality, weight, cost, material properties and manufacturing robustness.
Campo scientifico
Argomento(i)
Invito a presentare proposte
SP1-JTI-CS-2011-01
Vedi altri progetti per questo bando
Meccanismo di finanziamento
JTI-CS - Joint Technology Initiatives - Clean SkyCoordinatore
971 25 Lulea
Svezia