Obiettivo
Present trends in aircraft design towards augmented-stability and expanded flight envelopes call for an accurate description of the non-linear flight-dynamic behaviour of the aircraft in order to properly design the Flight Control System (FCS). Hence th e need to increase the knowledge about stability and control (S&C) as early as possible in the aircraft development process in order to be "First-Time-Right" with the FCS design architecture. FCS design usually starts near the end of the conceptual design phase when the configuration has been tentatively frozen and experimental data for predicted aerodynamic characteristics are available. Up to 80% of the lifecycle cost of an aircraft is incurred during the conceptual design phase so mistakes m ust be avoided.
To meet these challenges SimSAC develops along two major axes:
(i) creation and implementation of a simulation environment, CAESIOM, for conceptual design sizing and optimisation suitably knitted for low-to-high-fidelity S&C analysis; and
(ii) an improved pragmatic mix of numerical tools benchmarked against experimental data. Key objectives are: establish formalised geometry construction protocols to enable varying fidelity AeroModels, construct the CEASIOM system for S&C de sign and assessment at three levels of fidelity, including low-fidelity aero-elasticity effects, benchmark each numerical tool using established and widely recognized experimental data for existing configurations, conventional and unconventional, test and assess CAESIOM by undertaking a selection of design exercises of two types.
Achieving these objectives will advance the state-of-the-art in computer-aided concept design suitable for procuring economically amenable and ecologically friendly designs.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
- ingegneria e tecnologiaingegneria elettrica, ingegneria elettronica, ingegneria informaticaingegneria elettronicasistemi di controllo
- ingegneria e tecnologiaingegneria meccanicaingegneria dei veicoliingegneria aerospazialeaeromobili
- scienze naturalimatematicamatematica purageometria
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Argomento(i)
Invito a presentare proposte
FP6-2005-AERO-1
Vedi altri progetti per questo bando
Meccanismo di finanziamento
STREP - Specific Targeted Research ProjectCoordinatore
STOCKHOLM
Svezia
Mostra sulla mappa
Partecipanti (16)
BRISTOL
Mostra sulla mappa
TOULOUSE
Mostra sulla mappa
LAUSANNE
Mostra sulla mappa
PARIS
Mostra sulla mappa
KOLN
Mostra sulla mappa
MUNICH
Mostra sulla mappa
STOCKHOLM
Mostra sulla mappa
LIVERPOOL
Mostra sulla mappa
THORNTON
Mostra sulla mappa
CHATILLON
Mostra sulla mappa
MILANO
Mostra sulla mappa
LINKOPING
Mostra sulla mappa
ZHUKOVSKY
Mostra sulla mappa
PRAGUE 9 - LETNANY
Mostra sulla mappa
WARSAW
Mostra sulla mappa
POMIGLIANO D'ARCO (NA)
Mostra sulla mappa