Objectif
In this proposed integrating project we will develop innovative in-line high throughput manufacturing technologies which are all based on atmospheric pressure (AP) vapour phase surface and on AP plasma processing technologies. Both approaches have significant potential for the precise synthesis of nano-structures with tailored properties, but their effective simultaneous combination is particularly promising. We propose to merge the unique potential of atmospheric pressure atomic layer deposition (AP-ALD), with nucleation and growth chemical vapour deposition (AP-CVD) with atmospheric pressure based plasma technologies e.g. for surface nano-structuring by growth control or chemical etching and, sub-nanoscale nucleation (seed) layers. The potential for cost advantages of such an approach, combined with the targeted innovation, make the technology capable of step changes in nano-manufacturing. Compatible with high volume and flexible multi-functionalisation, scale-up to pilot-lines will be a major objective. Pilot lines will establish equipment platforms which will be targeted for identified, and substantial potential applications, in three strategically significant industrial areas: (i) energy storage by high capacity batteries and hybridcapacitors with enhanced energy density, (ii) solar energy production and, (iii) energy efficient (lightweight) airplanes.
A further aim is to develop process control concepts based on in-situ monitoring methods allowing direct correlation of synthesis parameters with nanomaterial structure and composition. Demonstration of the developed on-line monitoring tools in pilot lines is targeted.
The integrating project targets a strategic contribution to establishing a European high value added nano-manufacturing industry. New, cost efficient production methods will improve quality of products in high market value segments in industries such as renewable energy production, energy storage, aeronautics, and space.
DoW adaptations being made responding on requests from Phase-2 Evaluation Report
In Phase-2 of the evaluation process, a number of points were noted by the evaluators where the project had insufficient information or could benefit from “upgrading” or justification. Our response and actions against each point raised has been summarized and send to the project officer, Dr. Rene Martins, in a separate document.
Champ scientifique
Programme(s)
Appel à propositions
FP7-NMP-2012-LARGE-6
Voir d’autres projets de cet appel
Régime de financement
CP-IP - Large-scale integrating projectCoordinateur
80686 Munchen
Allemagne
Voir sur la carte
Participants (24)
Participation terminée
M5 4WT SALFORD-MANCHESTER
Voir sur la carte
02200 Espoo
Voir sur la carte
82024 Taufkirchen
Voir sur la carte
9400 RORSCHACH
Voir sur la carte
T12 YN60 Cork
Voir sur la carte
M5 4WT Salford
Voir sur la carte
01069 Dresden
Voir sur la carte
1117 Budapest
Voir sur la carte
12555 BERLIN
Voir sur la carte
91058 ERLANGEN
Voir sur la carte
01705 FREITAL
Voir sur la carte
8010 GRAZ
Voir sur la carte
1015 Lausanne
Voir sur la carte
Participation terminée
12681 BERLIN
Voir sur la carte
06766 BITTERFELD-WOLFEN OT THALHEIM
Voir sur la carte
Participation terminée
18 Dublin
Voir sur la carte
M13 9PL Manchester
Voir sur la carte
10709 BERLIN
Voir sur la carte
76326 REHOVOT
Voir sur la carte
2000 Neuchatel
Voir sur la carte
73479 Ellwangen Jagst
Voir sur la carte
6411TE HEERLEN
Voir sur la carte
06766 Bitterfeld-Wolfen
Voir sur la carte
75651 UPPSALA
Voir sur la carte