Cel
In this proposed integrating project we will develop innovative in-line high throughput manufacturing technologies which are all based on atmospheric pressure (AP) vapour phase surface and on AP plasma processing technologies. Both approaches have significant potential for the precise synthesis of nano-structures with tailored properties, but their effective simultaneous combination is particularly promising. We propose to merge the unique potential of atmospheric pressure atomic layer deposition (AP-ALD), with nucleation and growth chemical vapour deposition (AP-CVD) with atmospheric pressure based plasma technologies e.g. for surface nano-structuring by growth control or chemical etching and, sub-nanoscale nucleation (seed) layers. The potential for cost advantages of such an approach, combined with the targeted innovation, make the technology capable of step changes in nano-manufacturing. Compatible with high volume and flexible multi-functionalisation, scale-up to pilot-lines will be a major objective. Pilot lines will establish equipment platforms which will be targeted for identified, and substantial potential applications, in three strategically significant industrial areas: (i) energy storage by high capacity batteries and hybridcapacitors with enhanced energy density, (ii) solar energy production and, (iii) energy efficient (lightweight) airplanes.
A further aim is to develop process control concepts based on in-situ monitoring methods allowing direct correlation of synthesis parameters with nanomaterial structure and composition. Demonstration of the developed on-line monitoring tools in pilot lines is targeted.
The integrating project targets a strategic contribution to establishing a European high value added nano-manufacturing industry. New, cost efficient production methods will improve quality of products in high market value segments in industries such as renewable energy production, energy storage, aeronautics, and space.
DoW adaptations being made responding on requests from Phase-2 Evaluation Report
In Phase-2 of the evaluation process, a number of points were noted by the evaluators where the project had insufficient information or could benefit from “upgrading” or justification. Our response and actions against each point raised has been summarized and send to the project officer, Dr. Rene Martins, in a separate document.
Dziedzina nauki
Zaproszenie do składania wniosków
FP7-NMP-2012-LARGE-6
Zobacz inne projekty w ramach tego zaproszenia
System finansowania
CP-IP - Large-scale integrating projectKoordynator
80686 Munchen
Niemcy
Zobacz na mapie
Uczestnicy (24)
Zakończenie uczestnictwa
M5 4WT SALFORD-MANCHESTER
Zobacz na mapie
02200 Espoo
Zobacz na mapie
82024 Taufkirchen
Zobacz na mapie
9400 RORSCHACH
Zobacz na mapie
T12 YN60 Cork
Zobacz na mapie
M5 4WT Salford
Zobacz na mapie
01069 Dresden
Zobacz na mapie
1117 Budapest
Zobacz na mapie
12555 BERLIN
Zobacz na mapie
91058 ERLANGEN
Zobacz na mapie
01705 FREITAL
Zobacz na mapie
8010 GRAZ
Zobacz na mapie
1015 Lausanne
Zobacz na mapie
Zakończenie uczestnictwa
12681 BERLIN
Zobacz na mapie
06766 BITTERFELD-WOLFEN OT THALHEIM
Zobacz na mapie
Zakończenie uczestnictwa
18 Dublin
Zobacz na mapie
M13 9PL Manchester
Zobacz na mapie
10709 BERLIN
Zobacz na mapie
76326 REHOVOT
Zobacz na mapie
2000 Neuchatel
Zobacz na mapie
73479 Ellwangen Jagst
Zobacz na mapie
6411TE HEERLEN
Zobacz na mapie
06766 Bitterfeld-Wolfen
Zobacz na mapie
75651 UPPSALA
Zobacz na mapie