Obiettivo
The objective of this project was to develop polycrystalline silicon thin films and technologies for column bus drivers and line bus drivers to replace external chemical vapour deposition (IC) for peripheral driver circuits of active matrix liquid crystal displays (LCD). The main task was to develop a low temperature deposition process for the thin semiconductor films compatible with the glass substrates used for the LCD. The investigated deposition processes were plasma enhanced chemical vapour deposition (CVD) and electron gun evaporation, whereas low pressure CVD was used to establish the thin film transistors (TFT) process technology. Furthermore, elementary TFT circuits, suitable for bus driver shift registers, were investigated and developed. Driver prototypes of short length were also combined with LCD matrices and tested.
technologies can also affect other applications in large-area microelectronics, such as motionless scanners.
The objective of this project was to develop polycrystalline silicon(pSi) thin films and technologies for column-bus and line-bus drivers to replace external ICs for peripheral driver circuits of active matrix liquid crystal displays(LCDs).
The main task was to develop a low-temperature deposition process for the thin semiconductor films compatible with the glass substrates used for the LC display. The investigated deposition processes were Plasma Enhanced CVD and Egun evaporation, whereasLow Pressure CVD was used to establish the TFT process technology. Furthermore, elementary TFT circuits, suitable for bus driver shift registers, were investigated and developed. Driver prototypes of short length were also combined with LCD matrices and tested.
Progress and Results
The following results were achieved:
-Polycrystalline Si films prepared below 600 oC on borosilicate glasses were processed to produce TFTs.
-TFTs, prepared from Egun Si films deposited at 550 oC, used an atmospheric pressure CVD-deposited SiO2 layer. These TFTs showed field effect mobilities up to 16cm2/V and enabled a better yield than TFTs using plasma-processed gate insulators.
-With PECVD, the capability exists to prepare Si3N4 transistors with field effect mobilities up to 35 cm2/Vs in Silayers.
Using these deposition processes there is no need to use the costly process of ion implantation to obtain TFTs with the requested characteristics. Furthermore, at the above-mentioned deposition temperatures high-quality glass substrates can be used instead of the expensive quartz substrates needed for higher temperatures. Nevertheless, additional investigation will be necessary to reduce the deposition temperature to values where cheap soda lime glass substrates can be used.
A new TFT-equivalent circuit was inserted into the SPICE simulation programme, from which a five-level inverter with static TFTs could be simulated. Tests of the dynamic behaviour of this programme were performed, and good correlation with actual TFT was found.
Although the project was originally planned to last 5years, it stopped after in May1988, after only 3 years, by common agreement between the partners, following the decision of CNET to work on a production line in a competitive environment using some ofthe initial results (two-masks process for TFT manufactured with LPCVD-deposited pSifilms).
The goal expected for the end of the project (mid-1990), ie driver circuits on soda lime glass able to address a 300x300pixels LCD matrix with a resolution of 4pixels per millimetre, has obviously been not achieved. But the work scheduled for the lasttwo years in this project is now a part of the ongoing ESPRITproject on Active Matrix LCDs (number 2283). It is included in this new project as a specific task to be carried out by the same companies, AEG and CETIA.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/it/web/eu-vocabularies/euroscivoc.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/it/web/eu-vocabularies/euroscivoc.
- ingegneria e tecnologia ingegneria dei materiali rivestimenti e pellicole
- scienze naturali scienze fisiche elettromagnetismo ed elettronica semiconduttività
- scienze naturali scienze fisiche elettromagnetismo ed elettronica microelettronica
- scienze naturali scienze chimiche chimica inorganica metalloidi
- ingegneria e tecnologia ingegneria dei materiali cristalli liquidi
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Dati non disponibili
Coordinatore
60528 Frankfurt am Main
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.