Objetivo
The goal of the PLANET project was to develop high throughput, multiwafer MOVPE (metal-organic vapour phase epitaxy) equipment suitable for the realisation of complex III-V heterostructure materials for electronic and optoelectronic devices and circuits. Applications for these devices lie in the field of high-speed signal processing, high-frequency satellite broadcasting, and semiconductor laser-related information transmission and storage.
The aim of the project is to develop high throughput, industrial metal organic vapour phase epitaxy (MOVPE) equipment suitable for the fabrication of the complex III-V heterostructures required in microelectronics and optoelectronics. The equipment is based on a completely new concept of and MOVPE system allowing simultaneous growth of 7 wafers in planetary motion, using gas foil rotation. An industrial system has been defined and constructed, and improvements are being implemented. A mathematical model is also developed to simulate the growth. The performances of the equipment are outstanding: the layer thickness uniformity on 2 inch and 3 inch wafers is within +1% and the composition is well reproducible within 0.5%, whilst the average surface defect density is 5/cm{2}. The evaluation of the system in microelectronics is made with high electron mobility transistors; high values of cut-off frequencies (65 GHz) are obtained with low dispersion. In optoelectronics, the very low laser current densities (400 A/cm{2}) obtained also show the excellent quality of the material. The new MOVPE system will supply the sophisticated epitaxial heterostructures required for the developing applications in microelectronics and optoelectronics.
The goal of the PLANET project is to develop high throughput, multiwafer metal organic vapour phase epitaxy (MOVPE) equipment suitable for the realization of complex III-V heterostructure materials for electronic and optoelectronic devices and circuits. The project consists of the development and improvement of a reactor prototype, tests of the design, and its application to various types of III-V materials, including indium and phosphorus containing compounds. Throughout the project, epitaxy, characterization and device research support the equipment development work, and reactor modelling supports reactor optimization. Considerable hardware improvements have been implemented. Qualification of the prototype reactor has been successfully made. Agreement between observed parameter behaviour and dimensional simulations is satisfactory.
Homogeneity of layer thickness on 2 inch wafers is excellent (of the order of 1%) for aluminium gallium arsenide multilayer structures. Aluminium gallium arsenide multiple quantium well (MQW) lasers show excellent behaviour and good reliability. The results have been extended towards larger substrate sizes. First results on 3 inch substrates are very promising. Indium gallium arsenide pseudomorphic high electron mobility transistors (HEMT) have been successfully realised with a high day to day reproducibility. Emphasis is now on a 3 inch process for these pseudomorphic HEMT.
First layers of indium gallium phosphide and aluminium indium gallium phosphide for visible lasers have been grown. The evaluation results are very positive. Growth of laser structures for visible lasers is underway. Indium gallium arsenic phosphide/indium phosphide waveguides have been designed, and low losses realised by etching the waveguides using reactive ion etching (RIE). A preliminary evaluation has been made of indium gallium phosphide and indium aluminium phosphide visible laser materials grown in a conventional reactor.
3-dimensional simulations have b een successfully performed the defect density of the layers gas been found to be consistently below 10 defects cm{-2}, with the best results below 1 cm{-2}.
The project consisted of the development and improvement of a reactor prototype by an experienced MOVPE equipment manufacturer, tests of the design, and its application to various types of III-V materials, including In- and P-containing compounds. AlGaAs FETs and lasers were made for qualification of the PLANET reactor for these applications. In the second phase, a similar approach was taken towards improved InGaAs transistors and visible lasers made of InGaAlP. Throughout the project, epitaxy, characterisation and device research supported the equipment development work, and reactor modelling supported reactor optimisation.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias físicas electromagnetismo y electrónica optoelectrónica
- ingeniería y tecnología ingeniería mecánica ingeniería de vehículos ingeniería aeroespacial tecnología satelital
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica procesamiento de señales
- ciencias naturales ciencias químicas química inorgánica metales de postransición
- ciencias naturales ciencias físicas óptica física del láser
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Datos no disponibles
Coordinador
94453 Limeil-Brevannes
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.