European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-16

IONIC POLYMER-METAL COMPOSITE AS SENSOR AND ACTUATOR: APPLICATION IN MOTION CONTROL

Objetivo

The project proposal aims at fabricating an innovative material that is Ionic Polymer-Metal Composite (IPMC), in order to develop prototypes of an artificial muscle and of emotion sensor. To reach the aforesaid objectives, all Participants will conduct a series of theoretical researches and experimental analysis. Imps bend, if a voltage misapplied across their thickness and, vice versa, they generate a voltage signal if mechanically deformed, quasi-statically or dynamically. It is quite evident the possibility to overwork these properties to build both motion actuators and sensors. This kind of materials has a big potentiality in several application fields, such as robotics, biomedical, aerospace, safety and surveillance.
Nevertheless, at the moment those applications are limited by the poor knowledge of the mechanisms, which are involved in the actuation and sensing operative modes, the lack of models able to describe the material behaviour. Comparing this type of materials with other existing ones, such as Shape Memory Alloy (SMA) or Pies Electric Materials (PZT), Epics are lighter, cane activated by low voltage (few volts compared to hundreds of volts of PZT), as a good low frequency response (up to a minimum of hundreds of kHz) and can be produced without using toxic elements, such as Ni, Cod, Pub.

Palabras clave

Convocatoria de propuestas

FP6-2002-NMP-1
Consulte otros proyectos de esta convocatoria

Coordinador

CONSORZIO CATANIA RICERCHE
Aportación de la UE
Sin datos
Dirección
Via Santa Maria Del Rosario 9
CATANIA
Italia

Ver en el mapa

Coste total
Sin datos

Participantes (5)