Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-18

Uncertainty Management for Robust Industrial Design in Aeronautics

Objetivo

Virtual prototyping (VP) is a key technology for environmental friendly and cost effective design in the aircraft industry. However, the underlying analysis and simulation tools (for loads, stresses, emissions, noise), are currently applied with a unique set of input data and model variables, although realistic operating conditions are a superposition of numerous uncertainties under which the industrial products operate (uncertainties on operational conditions, on geometries resulting from manufacturing tolerances, numerical error sources and uncertain physical model parameters). Major new developments in this new scientific area of Uncertainty Management and Quantification (UM and UQ) and Robust Design methods (RDM) are needed to bridge the gap towards industrial readiness, as the treatment of uncertainties enables a rigorous management of performance engagements and associated risks. This is the main objective of the UMRIDA project, which has the following action lines:
• Address major challenges in UQ and RDM to develop and apply new methods able to handle large numbers of simultaneous uncertainties, generalized geometrical uncertainties in design and analysis within a turn-around time acceptable for industrial readiness in VP systems.
• To respond to the validation requirements of UQ and RDM, a new generation of database, formed by industrial challenges (provided by the industrial partners), and more basic test cases, with prescribed uncertainties, is proposed.
• The methods developed will be assessed quantitatively towards the industrial objectives on this database, during the project and at two open workshops. The gained experience will be assembled in a Best Practice Guide on UQ and RDM.
It is anticipated that the UMRIDA project will have a major impact on most of the EU objectives for air transport, by enabling design methods to take into account uncertainty based risk analysis.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

FP7-AAT-2013-RTD-1
Consulte otros proyectos de esta convocatoria

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

CP-FP - Small or medium-scale focused research project

Coordinador

CADENCE DESIGN SYSTEMS BELGIUM
Aportación de la UE
€ 590 000,00
Dirección
CHAUSSEE DE LA HULPE 187-189
1170 BRUXELLES
Bélgica

Ver en el mapa

Región
Région de Bruxelles-Capitale/Brussels Hoofdstedelijk Gewest Région de Bruxelles-Capitale/ Brussels Hoofdstedelijk Gewest Arr. de Bruxelles-Capitale/Arr. Brussel-Hoofdstad
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (21)

Mi folleto 0 0