Objectif
Virtual prototyping (VP) is a key technology for environmental friendly and cost effective design in the aircraft industry. However, the underlying analysis and simulation tools (for loads, stresses, emissions, noise), are currently applied with a unique set of input data and model variables, although realistic operating conditions are a superposition of numerous uncertainties under which the industrial products operate (uncertainties on operational conditions, on geometries resulting from manufacturing tolerances, numerical error sources and uncertain physical model parameters). Major new developments in this new scientific area of Uncertainty Management and Quantification (UM and UQ) and Robust Design methods (RDM) are needed to bridge the gap towards industrial readiness, as the treatment of uncertainties enables a rigorous management of performance engagements and associated risks. This is the main objective of the UMRIDA project, which has the following action lines:
• Address major challenges in UQ and RDM to develop and apply new methods able to handle large numbers of simultaneous uncertainties, generalized geometrical uncertainties in design and analysis within a turn-around time acceptable for industrial readiness in VP systems.
• To respond to the validation requirements of UQ and RDM, a new generation of database, formed by industrial challenges (provided by the industrial partners), and more basic test cases, with prescribed uncertainties, is proposed.
• The methods developed will be assessed quantitatively towards the industrial objectives on this database, during the project and at two open workshops. The gained experience will be assembled in a Best Practice Guide on UQ and RDM.
It is anticipated that the UMRIDA project will have a major impact on most of the EU objectives for air transport, by enabling design methods to take into account uncertainty based risk analysis.
Champ scientifique
- natural sciencescomputer and information sciencesdatabases
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- natural sciencesmathematicspure mathematicsgeometry
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
- natural sciencescomputer and information sciencessoftwaresoftware applicationssimulation software
Appel à propositions
FP7-AAT-2013-RTD-1
Voir d’autres projets de cet appel
Régime de financement
CP-FP - Small or medium-scale focused research projectCoordinateur
1170 Bruxelles / Brussel
Belgique
Voir sur la carte
Participants (21)
75008 Paris
Voir sur la carte
3440 Budingen
Voir sur la carte
Participation terminée
00195 Roma
Voir sur la carte
8005 Zurich
Voir sur la carte
64510 Bordes
Voir sur la carte
152903 RYBINSK YAROSLAV REGION
Voir sur la carte
34012 Trieste
Voir sur la carte
91120 Palaiseau
Voir sur la carte
51147 Koln
Voir sur la carte
78153 Le Chesnay Cedex
Voir sur la carte
81043 Capua
Voir sur la carte
08034 Barcelona
Voir sur la carte
31057 Toulouse Cedex
Voir sur la carte
2628 CN Delft
Voir sur la carte
1050 Bruxelles / Brussel
Voir sur la carte
00-661 WARSZAWA
Voir sur la carte
1015 Lausanne
Voir sur la carte
581 83 Linköping
Voir sur la carte
31700 BLAGNAC
Voir sur la carte
01069 Dresden
Voir sur la carte
00195 Roma
Voir sur la carte