Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-18

Establishment of an integrated process chain for the cost-efficient manufacturing complex glass optics

Objectif

Demand for complex yet low-cost glass optics is growing within the sectors of lighting technology, automotive engineering and in the areas of renewable energy. However European SMEs are continuously being confronted with the dual challenge arising from the trend towards increasingly complex geometries coupled with intense pressure on market prices.
Still the state-of-the-art to manufacture complex shaped glass optics is not efficient enough to meet the requirements of mass production sufficiently. The process requires large amounts of energy and manual work resulting in a very time-consuming and expensive process. Therefore the European SMEs pull for new technology developments enabling them to build up a new and improved process chain which allows for an efficient and economically viable glass optic replication.

The key to success in developing an efficient integrated production chain for complex optics is to mould optics directly from a gob of molten glass. By moulding directly from a gob of molten glass reheating of glass is obsolete saving large amounts of energy. Due to the precise cutting of glass gobs no subsequent mechanical processing is necessary and the amount of glass waste will be reduced to almost zero. In order to provide the SMEs with this efficient and economically viable production chain extensive developments are necessary.

The project CENTiMO will start with a detailed analysis of the gobforming and the moulding process. Based on this the RTD Partners Fraunhofer IPT and Glass Service will develop a suitable melting and gobforming process which is able to form gobs which can directly be moulded into glass optics. In parallel, the glass moulding process will be developed. In order to achieve the required quality and mould lifetime new mould materials will be evaluated. Finally an evaluation and qualification of the developed processes will give decisive feedback for the improvement of the whole process chain.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

FP7-SME-2013
Voir d’autres projets de cet appel

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

BSG-SME - Research for SMEs

Coordinateur

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Contribution de l’UE
€ 30 819,69
Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (5)

Mon livret 0 0