Objectif The development of a new Iron-cobalt soft magnetic alloy is proposed with a smart combination of both high mechanical strength and moderated iron losses. The former allows higher speed of electric generator, increasing the mass power density. The later improves the thermal transfer of dissipated energies, the sustainability of the generator and help then to a further power density increase. In the complete continuation of Aperam RTD efforts these last years, this new material very recently patented has been demonstratedon laboratory scale and - in some few cases of working features – onindustrial tools for small quantities.But this new material is roughly defined as a new alloys family – Iron-cobalt fully processed (i.e. annealed) and workable material – and it needs to be optimised and fully characterized with respect to working solicitations. In the framework of this project, such a high strength new FeCo alloy will be defined in terms of processing parameters corresponding to 800MPa yield stress (R0,2) whereas several metallurgical ways will be studied to get lower iron losses than previous know ones (280W/kg at 2T/400Hz for 0,4mm thickness) without a marked decrease of R0,2. Complementary processessuch as thin foils assembly, recovery or texturization will be used to reach this later target, with the help of a specialized partner (LPCES).After optimization of the lamination structure and of its microstructure, the new material will be deeply characterized mechanically and magnetomechanically (including influence of uni- or bi-axial stresses on the magnetic properties) by an other specialized partner (LMT). At the same moment some small quantities (300 to 500kg) of the optimised alloy will be processed on industrial tools and punched in pieces to provide 2 rotor stacks to theTopic Manager Company. Programme(s) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Thème(s) JTI-CS-2013-1-SGO-02-070 - New magnetic materials for machines Appel à propositions SP1-JTI-CS-2013-01 Voir d’autres projets de cet appel Régime de financement JTI-CS - Joint Technology Initiatives - Clean Sky Coordinateur APERAM ALLOYS IMPHY SAS Contribution de l’UE € 68 970,00 Adresse AVENUE JEAN JAURES 58160 IMPHY France Voir sur la carte Type d’activité Private for-profit entities (excluding Higher or Secondary Education Establishments) Contact administratif Laurence Defosse (Mrs.) Liens Contacter l’organisation Opens in new window Site web Opens in new window Coût total Aucune donnée Participants (2) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire UNIVERSITE PARIS-SUD France Contribution de l’UE € 98 084,00 Adresse RUE GEORGES CLEMENCEAU 15 91405 ORSAY CEDEX Voir sur la carte Type d’activité Higher or Secondary Education Establishments Contact administratif Nicolas Lecompte (Mr.) Liens Contacter l’organisation Opens in new window Site web Opens in new window Coût total Aucune donnée ECOLE NORMALE SUPERIEURE PARIS-SACLAY France Contribution de l’UE € 46 185,00 Adresse 4 AVENUE DES SCIENCES 91190 Gif-Sur-Yvette Voir sur la carte Région Ile-de-France Ile-de-France Essonne Type d’activité Higher or Secondary Education Establishments Contact administratif Agnes Tang Tong Hi (Mrs.) Liens Contacter l’organisation Opens in new window Site web Opens in new window Coût total Aucune donnée