Objectif
This project will focus on the development of technologies and methodologies which have the potential
to save costs and time across the whole life cycle of the aircraft (design, production, maintenance, overhaul, repair and retrofit), including for certification aspects. Moreover it will also target the integration of additional functions or materials in structural components of the aircraft, the increased use of automation.
The first proposed step is the introduction of the γ-TiAl alloy, a well known promising advanced material for aerospace
applications and a revolutionary manufacturing technology. Its specific stiffness and strength, as compared to its low weight,
potentially leads to large weight savings (50%), and therefore lower mechanical loads on thermomechanical stressed parts,
compared to the common Ni based superalloys. The integration of new material and new manufacturing technology will
positively impact several aspects of the manufacturing and maintenance chain, starting from the design, the production, the
repair).
The aim of this project is twofold:
- On one side the work will be focused on the development and integration at industrial of a IPR protected gas
atomization process for producing TiAl powders, whose properties must be highly stable from batch to batch.
Thanks to the stability of the chemical and granulometric properties of the powders, the application of the Rapid
Manufacturing technique to the production of TiAl components will be economically affordable. While this technique is
by now well-known, its main drawback resides in the scarce quality of the starting powders.
- The other main drawback for the wide industrial application of TiAl components is the integrated optimisation of all
the machining steps, that means the setting up of machine tool characteristics and parameters, cutting tool
geometry, substrate and coating materials, advanced lubrication technologies.
Champ scientifique
- engineering and technologymechanical engineeringtribologylubrication
- natural scienceschemical sciencesinorganic chemistrytransition metals
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- engineering and technologymechanical engineeringmanufacturing engineeringsubtractive manufacturing
- engineering and technologymechanical engineeringvehicle engineeringautomotive engineering
Programme(s)
Régime de financement
RIA - Research and Innovation actionCoordinateur
S10 2TN Sheffield
Royaume-Uni
Voir sur la carte
Participants (13)
S6 2FH Sheffield
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
05100 MONTGENEVRE
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
G1 1XQ Glasgow
Voir sur la carte
10145 Torino
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
75116 Paris
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
20093 Cologno Monzese
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
20870 Elgoibar
Voir sur la carte
31030 Carbonera
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
31100 Treviso
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
10099 San Mauro Torinese
Voir sur la carte
20500 Arrasate
Voir sur la carte
10093 COLLEGNO
Voir sur la carte
SW7 2AZ LONDON
Voir sur la carte