Cel
This project will focus on the development of technologies and methodologies which have the potential
to save costs and time across the whole life cycle of the aircraft (design, production, maintenance, overhaul, repair and retrofit), including for certification aspects. Moreover it will also target the integration of additional functions or materials in structural components of the aircraft, the increased use of automation.
The first proposed step is the introduction of the γ-TiAl alloy, a well known promising advanced material for aerospace
applications and a revolutionary manufacturing technology. Its specific stiffness and strength, as compared to its low weight,
potentially leads to large weight savings (50%), and therefore lower mechanical loads on thermomechanical stressed parts,
compared to the common Ni based superalloys. The integration of new material and new manufacturing technology will
positively impact several aspects of the manufacturing and maintenance chain, starting from the design, the production, the
repair).
The aim of this project is twofold:
- On one side the work will be focused on the development and integration at industrial of a IPR protected gas
atomization process for producing TiAl powders, whose properties must be highly stable from batch to batch.
Thanks to the stability of the chemical and granulometric properties of the powders, the application of the Rapid
Manufacturing technique to the production of TiAl components will be economically affordable. While this technique is
by now well-known, its main drawback resides in the scarce quality of the starting powders.
- The other main drawback for the wide industrial application of TiAl components is the integrated optimisation of all
the machining steps, that means the setting up of machine tool characteristics and parameters, cutting tool
geometry, substrate and coating materials, advanced lubrication technologies.
Dziedzina nauki
- engineering and technologymechanical engineeringtribologylubrication
- natural scienceschemical sciencesinorganic chemistrytransition metals
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- engineering and technologymechanical engineeringmanufacturing engineeringsubtractive manufacturing
- engineering and technologymechanical engineeringvehicle engineeringautomotive engineering
Program(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-MG-2014_TwoStages
System finansowania
RIA - Research and Innovation actionKoordynator
S10 2TN Sheffield
Zjednoczone Królestwo
Zobacz na mapie
Uczestnicy (13)
S6 2FH Sheffield
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
05100 MONTGENEVRE
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
G1 1XQ Glasgow
Zobacz na mapie
10145 Torino
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
75116 Paris
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
20093 Cologno Monzese
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
20870 Elgoibar
Zobacz na mapie
31030 Carbonera
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
Podmiot prawny inny niż podwykonawca, stowarzyszony lub mający inne powiązania prawne z uczestnikiem. Podmiot realizuje prace na podstawie warunków umowy o grant, dostarcza towary lub świadczy usługi związane z działaniem, jednak nie podpisuje umowy o grant. Podmiot zewnętrzny przestrzega zasad i wymogów dotyczących danego uczestnika wynikających z umowy o grant, dotyczących kwalifikowalności kosztów oraz kontroli wydatków.
31100 Treviso
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
10099 San Mauro Torinese
Zobacz na mapie
20500 Arrasate
Zobacz na mapie
10093 COLLEGNO
Zobacz na mapie
SW7 2AZ LONDON
Zobacz na mapie