Resultado final
This report will deal with the detailed specifications of the Common Information Data Exchange Model. It will be a living document with two revisions foreseen in M16 and M28.
SatisFactory System ArchitectureThis report will describe in details architecture views of the Satisfactory system. Two additional versions will be available at M8 (also as a Milestone) and M16.
User group definitions, end-user needs, requirement analysis and deployment guidelinesThis report will deal with user group definitions enduser needs requirement analysis and deployment guidelines Following the iterative methodology foreseen in the project this report will be updated if needed by Month 14 and M26
Evaluation PlanA first version with the evaluation plan (pilots setup, technical and end-user involvment, etc) will be delivered early in the project lifetime (M14). This plan will be a working document which will be finalized by M32.
Report on Dissemination Activities, Public Participation and AwarenessThe report will be yearly available (M12 by SIGMA, M24 & M36 by QPLAN), reporting all the activities performed by the consortium.
Final System Evaluation ReportDetailed report describing the evaluation results of the Satisfactory system.
Use Case analysis and application scenarios descriptionThis report will report the detailed Use Cases and application scenarios of the project. Report findings will be updated on M15 and M27.
Plans for the dissemination and communication of project resultsBy Month 6 (SIGMA) the dissemination and communication plans will be described in details. Updates on the plan as well as identified follow-up activities by the consortium will be included in the final revision of the report (M36) by QPLAN.
The first version (M26) will include details about the planning of the industrial pilots (number of workers involved, use cases to be demonstrated, etc). The final version will include the results from the iterative deployment of the Satisfactory tools and technologies in the shopfloors of COMAU and SUNLIGHT.
Industrial lab use case Set-up and DemonstrationThe first version will include details for the preparation of the industrial lab Use Case. The final version will include the achievements and recommendations stemming from the execution of the pre-pilot at CERTH premises.
Detailed report for the data management policy of the project (updated at M12-SIGMA, 24-QPLAN and M36-QPLAN of the project).
This report will report the techniques developed along with the corresponding software stack.
End-users VR-enabled training material and scenariosThe report will entail the training material as well as the accompany VR-enabled application.
Social Experience and Gamification techniques for increasing attractivenessFirst version will be available by Month 20.
HR Workload Management toolkitA first version of the report and the preliminary toolkit will be available on Month 20.
Knowledge model for human resource optimizationA first version will be available by M12. The full detailed model and the corresponding software will be described in the final version (M18).
"On job"" training/educational environment”"A first version of the report and the toolkit will be available on Month 20
Collaborative platform for work process supportThe first version (M20) will report the collaborative platform components, whereas the final version will include also the technical benchmarking of the platform.
Semantically-enriched framework for analysis and design of shop floor operationsThis report will describe the framework along with the corresponding software.
Data aggregation toolkit and control middleware that integrates social collaboration and sensing environmentsA first version of the report and the software will be available by Month 20 (for testing on lab and pre-pilot at CERTH).
Full description of the project's website .
Publicaciones
Autores:
Orlando Tovar Ordoñez, Francesco Sottile, Emil Kallias, and Claudio Pastrone
Publicado en:
11th EAI International Conference on Body Area Networks, 2016, Página(s) 19-25, ISBN 978-1-63190-132-4
Editor:
ACM
Autores:
Evdoxia Eirini Lithoxoidou, Stefanos Doumpoulakis, Athanasios Tsakiris, Stelios Krinidis, Dimosthenis Ioannidis, Konstantinos Votis, Dimitrios Tzovaras
Publicado en:
International Conference on Internet Science, Edición INSCI'17, 2017, Página(s) 184-191, ISBN 978-3-319-70284-1
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-70284-1_15
Autores:
Michele Ligios, Maria Teresa Delgado, Rosaria Rossini, Davide Conzon, Francesco Sottile, Claudio Pastrone
Publicado en:
World Conference on Information Systems and Technologies, 2017, Página(s) 321-331, ISBN 978-3-319-56538-5
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-56538-5_33
Autores:
D. Arena and D. Kiritsis
Publicado en:
8th CIRP Conference on Learning Factories - Advanced Engineering Education & Training for Manufacturing Innovation, 2018
Editor:
Elsevier
Autores:
Dimitra Triantafyllou, Stelios Krinidis, Dimosthenis Ioannidis and Dimitrios Tzovaras
Publicado en:
2nd International Conference on Building Information Modelling (BIM) in Design, Construction and Operations, Edición BIM'17, 2017, Página(s) 266-275
Editor:
WIT press
Autores:
Giorgos Tziroglou, Thanasis Vafeiadis, Chrysovalantou Ziogou, Stelios Krinidis, Spyros Voutetakis, Dimitrios Tzovaras
Publicado en:
International Conference on Intelligent Systems in Production Engineering and Maintenance, Edición ISPEM'17, 2017, Página(s) 43-53, ISBN 978-3-319-64465-3
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-64465-3_5
Autores:
D. Arena, K. Ziazios, I.N. Metaxa, S. Parcharidis, S. Zikos, A. Tsolakis, S. Krinidis, D. Ioannidis, D. Tzovaras, D. Kiritsis
Publicado en:
IFIP International Conference on Advances in Production Management Systems, Edición APMS'17, 2017, Página(s) 306-313, ISBN 978-3-319-66923-6
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-66923-6_36
Autores:
S. Zikos, S. Krinidis, D. Ioannidis, D. Tzovaras, K. Ziazios, I. Metaxa
Publicado en:
International Conference on Mathematics and Computers in Sciences and Industry, Edición MSCI'17, 2017
Editor:
IEEE
Autores:
E. Lithoxoidou, C. Ziogou, T. Vafeiadis, S. Krinidis, D. Ioannidis, S. Voutetakis and D. Tzovaras
Publicado en:
IEEE International Conference on Engineering, Technology and Innovation, Edición ICE'17, 2017
Editor:
IEEE
Autores:
Chrysovalantou Ziogou, Damiano Arena, Stelios Krinidis, Dimosthenis Ioannidis, Dimitrios Kiritsis, Dimitrios Tzovaras, Spyros Voutetakis
Publicado en:
27th European Symposium on Computer Aided Process Engineering, Edición ESCAPE'17, 2017, Página(s) 2365-2370
Editor:
Elsevier
DOI:
10.1016/b978-0-444-63965-3.50396-2
Autores:
Enrico Ferrera, Rosaria Rossini, Davide Conzon, Sandro Tassone, Claudio Pastrone
Publicado en:
2016 8th IFIP International Conference on New Technologies, Mobility and Security (NTMS), 2016, Página(s) 1-5, ISBN 978-1-5090-2914-3
Editor:
IEEE
DOI:
10.1109/NTMS.2016.7792431
Autores:
Nikolaos Dimitriou, Georgios Stavropoulos, Konstantinos Moustakas, Dimitrios Tzovaras
Publicado en:
2016 13th IEEE International Conference on Advanced Video and Signal Based Surveillance (AVSS), Edición AVSS'16, 2016, Página(s) 200-206, ISBN 978-1-5090-3811-4
Editor:
IEEE
DOI:
10.1109/AVSS.2016.7738057
Autores:
D. Arena, C. Zigou, S. Voutetakis and D. Kiritsis
Publicado en:
IEEE International Engineering, Technology and Innovation, Edición ICE '17, 2017
Editor:
IEEE
Autores:
I.N. Metaxa, C. Ziazios, A. Serra, D. Tzovaras, A. Tsakiris, S. Voutetakis, C. Ziogou and P. Cultrona
Publicado en:
Euromaintenance 2016, Edición -, 2016, Página(s) 6
Editor:
-
Autores:
C. Ziogou, S Krinidis, D Ioannidis, S Papadopoulou, D Tzovaras and S Voutetakis
Publicado en:
European Symposium on Computer Aided Process Engineering, 2016, Página(s) 6
Editor:
Elsevier
Autores:
Krinidis, D. Ioannidis, D. Tzovaras, S. Papadopoulou and S. Voutetakis
Publicado en:
Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Edición -, 2016, Página(s) -
Editor:
SCOPUS and ISI Thompson Reuters
Autores:
A. Tsolakis, D. Arena, S. Krinidis, A. Perdikakis, D. Ioannidis, D. Kyritsis and D. Tzovaras
Publicado en:
IEEE International Conference on Industrial Informatics, Edición INDIN 2016, 2016, Página(s) 5
Editor:
IEEE
Autores:
T. Vafeiadis, S. Krinidis, C. Ziogou, D. Ioannidis, S. Voutetakis, D. Tzovaras
Publicado en:
IEEE International Conference on Industrial Informatics, Edición INDIN 2016, 2016, Página(s) 6
Editor:
IEEE
Autores:
T. Vafeiadis, D. Ioannidis, S. Krinidis, C. Ziogou, S. Voutetakis, D. Tzovaras and S. Likothanassis
Publicado en:
European Signal Processing Conference, Edición EUSIPCO 2016, 2016, Página(s) 5
Editor:
IEEE
Autores:
S. Zikos, S. Rogotis, S. Krinidis, D. Ioannidis and D. Tzovaras
Publicado en:
European Conference on Product & Process Modelling, Edición ECPPM’16, 2016, Página(s) 7
Editor:
CRC Press
Autores:
D. Triantafyllou, S. Krinidis, D. Ioannidis, I.N. Metaxa, C. Ziazios and D. Tzovaras
Publicado en:
IFAC AMEST Workshop “Maintenance Technologies for Performance Enhancement”, Edición AMEST 2016, 2016, Página(s) 5
Editor:
ELSEVIER
Autores:
Damiano Arena, Apostolos Charalampos Tsolakis, Stylianos Zikos, Stelios Krinidis, Chrysovalantou Ziogou, Dimosthenis Ioannidis, Spyros Voutetakis, Dimitrios Tzovaras, Dimitris Kiritsis
Publicado en:
International Journal of Production Research, 2017, Página(s) 1-23, ISSN 0020-7543
Editor:
Taylor & Francis
DOI:
10.1080/00207543.2017.1415468
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles