CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
Public defintion of the two LIFES50+ 10MW floater concepts. (se abrirá en una nueva ventana)
Design Basis (se abrirá en una nueva ventana)
A definition of the full set of environmental conditions and design load cases that shall be considered within the project
Overall summary of the industrialization process (se abrirá en una nueva ventana)Dissemination – overall summary of the industrialization process in one publication
Optimization framework and methodology for optimized floater design. (se abrirá en una nueva ventana)Project Quality and risk management plan (se abrirá en una nueva ventana)
Required numerical model fidelity and critical design load cases in various design phases (se abrirá en una nueva ventana)
Required numerical model fidelity and critical design load cases in various design phases, including industrialization.
Risk management for deep water substructures (se abrirá en una nueva ventana)AeroDyn validated model (se abrirá en una nueva ventana)
Report on validation and tuning of AeroDyn model to be implemented in the HIL system for ocean basin tests
Report of initial kick-off meeting (se abrirá en una nueva ventana)Report of initial kickoff meeting
Review of FOWT guidelines and design practise (se abrirá en una nueva ventana)Review report on current regulations in guidelines and standards and publicly available design practices
Oceanographic and meteorological conditions for the design (se abrirá en una nueva ventana)Oceanographic and meteorological conditions for the design Report with the analysis and selection of the target locations and the oceanographic and meteorological conditions for the concepts design
Wind turbine models for the design (se abrirá en una nueva ventana)10MW wind turbine FASTAeroDyn model to be used by concepts developers including a report with the model description
Handbook Management procedures (se abrirá en una nueva ventana)Guidance on platform and mooring line selection, installation and marine operations (se abrirá en una nueva ventana)
Publication and presentation of the research performed in the WP (se abrirá en una nueva ventana)
Publication and presentation of the research
Model validation against experiments and map of model accuracy across load cases. (se abrirá en una nueva ventana)State-of-the-art models for the two public 10MW floater concepts (se abrirá en una nueva ventana)
State-of-the-art models for the two public 10MW floater concepts.
Overview of the numerical models used in the consortium and their qualification (se abrirá en una nueva ventana)Overview of numerical consortium models and their qualification
Validation of advanced models and methods for cascading into simpler models. (se abrirá en una nueva ventana)Periodic reports to EC (se abrirá en una nueva ventana)
Framework for LCOE, uncertainty and risk considerations during design (se abrirá en una nueva ventana)
Dissemination guidelines and procedures (se abrirá en una nueva ventana)
Design practice for 10MW+ FOWT support structures (se abrirá en una nueva ventana)
A public design practice for FOWT developers and researchers summarizing and condensing all key information in a generalized way from previous deliverables in WP8, i.e. the lessons learned, findings, methodologies and knowledge generated related to design. It includes chapters on necessary pre-design requirements and specifications, experimental and numerical design practices, as well as LCOE, uncertainty, risk and industrialization considerations and also includes exemplarily applications of the developed design methodologies.
State-of-the-art FOWT design practise and guidelines (se abrirá en una nueva ventana)State of the art report summarizing the current industrial design practice and design phases and current regulations in guidelines and standards including an analysis of their importance on design and LCOE
LCOE tool description, technical and environmental impact evaluation procedure (se abrirá en una nueva ventana)Description report evaluation tools LCOE and other KPI which will be used in the project It also contains a survey of similar tools and procedures Report also contents the results from industry assessment
Presentation of the methodology and results of the WP at a relevant conference (se abrirá en una nueva ventana)Guidance and recommended methods for HIL/SIL-based FOWT experimental testing (se abrirá en una nueva ventana)
Guidance and recommended methods for HIL/SIL-based FOWT testing.
Identification of critical environmental conditions and design load cases (se abrirá en una nueva ventana)Description of the most critical environmental conditions and design load cases for different platform types.
IPR Guidelines (se abrirá en una nueva ventana)Expected LCOE for floating wind turbines 10MW+ for 50m+ water depth (se abrirá en una nueva ventana)
Report showing extrapolated results for LCOE and evaluation values, which should be realistic for our concepts assuming real production and cost reduction of several years. This result determines the definitive expected cost of energy for such floater concepts.
Upscaling procedure (se abrirá en una nueva ventana)Report collecting design experience during the upscaling process.
Recommendations for platform design under considerations of O&M, logistics, manufacturing and decommissioning (se abrirá en una nueva ventana)Recommendations for platform design under considerations of O&M, logistics, manufacturing and decommissioning.
Aeroelastic scaled model of the 10MW reference wind turbine
HexaFloat robot (se abrirá en una nueva ventana)6 DOF moving platform for wind turbine HIL testing in wind tunnel
Publicaciones
Autores:
Ilmas Bayati, Alan Facchinetti, Alessandro Fontanella, Marco Belloli
Publicado en:
Volume 10: Ocean Renewable Energy, 2018, Página(s) V010T09A078, ISBN 978-0-7918-5131-9
Editor:
ASME
DOI:
10.1115/OMAE2018-77804
Autores:
Kolja Müller, Ricardo Faerron Guzman, Po Wen Cheng, Josean Galván, Miren J. Sánchez, Raúl Rodríguez, Andreas Manjock
Publicado en:
ASME 2018 1st International Offshore Wind Technical Conference, 2018, Página(s) V001T01A042, ISBN 978-0-7918-5197-5
Editor:
ASME
DOI:
10.1115/IOWTC2018-1062
Autores:
Lemmer, Frank; Yu, Wei; Cheng, Po Wen; Pegalajar-Jurado, Antonio; Borg, Michael; Mikkelsen, Robert F.; Bredmose, Henrik
Publicado en:
Edición 1, 2018
Editor:
ASME
DOI:
10.18419/opus-10047
Autores:
Antonio Pegalajar-Jurado, Michael Borg, Henrik Bredmose
Publicado en:
Wind Energy Science, Edición 3/2, 2018, Página(s) 693-712, ISSN 2366-7451
Editor:
Wind Energy Science
DOI:
10.5194/wes-3-693-2018
Autores:
Hermes Giberti, Francesco La Mura, Gabriele Resmini, Marco Parmeggiani
Publicado en:
Robotics, Edición 7/3, 2018, Página(s) 39, ISSN 2218-6581
Editor:
Robotics 2018
DOI:
10.3390/robotics7030039
Autores:
Ilmas Bayati, Marco Belloli, Luca Bernini, Alberto Zasso
Publicado en:
Journal of Wind Engineering and Industrial Aerodynamics, Edición 167, 2017, Página(s) 217-227, ISSN 0167-6105
Editor:
Elsevier BV
DOI:
10.1016/j.jweia.2017.05.004
Autores:
Kolja Müller, Po Wen Cheng
Publicado en:
Wind Energy Science, Edición 3/1, 2018, Página(s) 149-162, ISSN 2366-7451
Editor:
WIND ENERGY SCIENCE
DOI:
10.5194/wes-3-149-2018
Autores:
J Galván, M J Sánchez-Lara, I Mendikoa, G Pérez-Morán, V Nava, R Rodríguez-Arias
Publicado en:
Journal of Physics: Conference Series, Edición 1102, 2018, Página(s) 012015, ISSN 1742-6588
Editor:
Institute of Physics
DOI:
10.1088/1742-6596/1102/1/012015
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles