Qualification of innovative floating substructures for 10MW wind turbines and water depths greater than 50m.

Informations projet

LIFES 50plus

N° de convention de subvention: 640741

DOI

10.3030/640741

Projet clôturé

Date de signature de la CE 20 Mai 2015

Date de début 1 Juin 2015

Date de fin 30 Avril 2019

Financé au titre de

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Coût total

€ 7 274 837,50

Contribution de l’UE

€ 7 274 837,50

Coordonné par

SINTEF OCEAN AS
Norway

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (33)

Models for advanced load effects and loads at component level.
Public defintion of the two LIFES50+ 10MW floater concepts.
Design Basis

A definition of the full set of environmental conditions and design load cases that shall be considered within the project

Overall summary of the industrialization process

Dissemination – overall summary of the industrialization process in one publication

Optimization framework and methodology for optimized floater design.
Project Quality and risk management plan
Required numerical model fidelity and critical design load cases in various design phases

Required numerical model fidelity and critical design load cases in various design phases, including industrialization.

Risk management for deep water substructures
AeroDyn validated model

Report on validation and tuning of AeroDyn model to be implemented in the HIL system for ocean basin tests

Report of initial kick-off meeting

Report of initial kickoff meeting

Review of FOWT guidelines and design practise

Review report on current regulations in guidelines and standards and publicly available design practices

Oceanographic and meteorological conditions for the design

Oceanographic and meteorological conditions for the design Report with the analysis and selection of the target locations and the oceanographic and meteorological conditions for the concepts design

Wind turbine models for the design

10MW wind turbine FASTAeroDyn model to be used by concepts developers including a report with the model description

Handbook Management procedures
Guidance on platform and mooring line selection, installation and marine operations
Publication and presentation of the research performed in the WP

Publication and presentation of the research

Model validation against experiments and map of model accuracy across load cases.
State-of-the-art models for the two public 10MW floater concepts

State-of-the-art models for the two public 10MW floater concepts.

Overview of the numerical models used in the consortium and their qualification

Overview of numerical consortium models and their qualification

Validation of advanced models and methods for cascading into simpler models.
Periodic reports to EC
Framework for LCOE, uncertainty and risk considerations during design
Dissemination guidelines and procedures
Design practice for 10MW+ FOWT support structures

A public design practice for FOWT developers and researchers summarizing and condensing all key information in a generalized way from previous deliverables in WP8, i.e. the lessons learned, findings, methodologies and knowledge generated related to design. It includes chapters on necessary pre-design requirements and specifications, experimental and numerical design practices, as well as LCOE, uncertainty, risk and industrialization considerations and also includes exemplarily applications of the developed design methodologies.

State-of-the-art FOWT design practise and guidelines

State of the art report summarizing the current industrial design practice and design phases and current regulations in guidelines and standards including an analysis of their importance on design and LCOE

LCOE tool description, technical and environmental impact evaluation procedure

Description report evaluation tools LCOE and other KPI which will be used in the project It also contains a survey of similar tools and procedures Report also contents the results from industry assessment

Presentation of the methodology and results of the WP at a relevant conference
Guidance and recommended methods for HIL/SIL-based FOWT experimental testing

Guidance and recommended methods for HIL/SIL-based FOWT testing.

Identification of critical environmental conditions and design load cases

Description of the most critical environmental conditions and design load cases for different platform types.

IPR Guidelines
Expected LCOE for floating wind turbines 10MW+ for 50m+ water depth

Report showing extrapolated results for LCOE and evaluation values, which should be realistic for our concepts assuming real production and cost reduction of several years. This result determines the definitive expected cost of energy for such floater concepts.

Upscaling procedure

Report collecting design experience during the upscaling process.

Recommendations for platform design under considerations of O&M, logistics, manufacturing and decommissioning

Recommendations for platform design under considerations of O&M, logistics, manufacturing and decommissioning.

Websites, patent fillings, videos etc. (4)

External website launched
Project logo
Project flyer
MS Powerpoint and MS Word templates

Other (2)

Wind turbine scaled model

Aeroelastic scaled model of the 10MW reference wind turbine

HexaFloat robot

6 DOF moving platform for wind turbine HIL testing in wind tunnel

Publications

Conference proceedings (3)

6-DoF Hydrodynamic Modelling for Wind Tunnel Hybrid/HIL Tests of FOWT: The Real-Time Challenge

Auteurs: Ilmas Bayati, Alan Facchinetti, Alessandro Fontanella, Marco Belloli
Publié dans: Volume 10: Ocean Renewable Energy, 2018, Page(s) V010T09A078, ISBN 978-0-7918-5131-9
Éditeur: ASME
DOI: 10.1115/OMAE2018-77804

Load Sensitivity Analysis for a Floating Wind Turbine on a Steel Semi-Submersible Substructure

Auteurs: Kolja Müller, Ricardo Faerron Guzman, Po Wen Cheng, Josean Galván, Miren J. Sánchez, Raúl Rodríguez, Andreas Manjock
Publié dans: ASME 2018 1st International Offshore Wind Technical Conference, 2018, Page(s) V001T01A042, ISBN 978-0-7918-5197-5
Éditeur: ASME
DOI: 10.1115/IOWTC2018-1062

The TripleSpar campaign: validation of a reduced-order simulation model for floating wind turbines

Auteurs: Lemmer, Frank; Yu, Wei; Cheng, Po Wen; Pegalajar-Jurado, Antonio; Borg, Michael; Mikkelsen, Robert F.; Bredmose, Henrik
Publié dans: Numéro 1, 2018
Éditeur: ASME
DOI: 10.18419/opus-10047

Peer reviewed articles (5)

An efficient frequency-domain model for quick load analysis of floating offshore wind turbines

Auteurs: Antonio Pegalajar-Jurado, Michael Borg, Henrik Bredmose
Publié dans: Wind Energy Science, Numéro 3/2, 2018, Page(s) 693-712, ISSN 2366-7451
Éditeur: Wind Energy Science
DOI: 10.5194/wes-3-693-2018

Fully Mechatronical Design of an HIL System for Floating Devices

Auteurs: Hermes Giberti, Francesco La Mura, Gabriele Resmini, Marco Parmeggiani
Publié dans: Robotics, Numéro 7/3, 2018, Page(s) 39, ISSN 2218-6581
Éditeur: Robotics 2018
DOI: 10.3390/robotics7030039

Aerodynamic design methodology for wind tunnel tests of wind turbine rotors

Auteurs: Ilmas Bayati, Marco Belloli, Luca Bernini, Alberto Zasso
Publié dans: Journal of Wind Engineering and Industrial Aerodynamics, Numéro 167, 2017, Page(s) 217-227, ISSN 0167-6105
Éditeur: Elsevier BV
DOI: 10.1016/j.jweia.2017.05.004

Application of a Monte Carlo procedure for probabilistic fatigue design of floating offshore wind turbines

Auteurs: Kolja Müller, Po Wen Cheng
Publié dans: Wind Energy Science, Numéro 3/1, 2018, Page(s) 149-162, ISSN 2366-7451
Éditeur: WIND ENERGY SCIENCE
DOI: 10.5194/wes-3-149-2018

NAUTILUS-DTU10 MW Floating Offshore Wind Turbine at Gulf of Maine: Public numerical models of an actively ballasted semisubmersible

Auteurs: J Galván, M J Sánchez-Lara, I Mendikoa, G Pérez-Morán, V Nava, R Rodríguez-Arias
Publié dans: Journal of Physics: Conference Series, Numéro 1102, 2018, Page(s) 012015, ISSN 1742-6588
Éditeur: Institute of Physics
DOI: 10.1088/1742-6596/1102/1/012015