Deliverables Demonstrators, pilots, prototypes (1) Design-Knowledge Platform/Expert System - 2nd Prototype Design-Knowledge Platform/Expert System - 2nd Prototype, including advanced functionality and User Interface Other (2) Mid-term Conference Mid-term Conference and cross-sectorial workshop. Project Closing Conference Project Closing Conference Documents, reports (7) Ecoeffiency analysis with second life supply for processes and products Ecoeffiency analysis with second life supply for at least 2 processes and products conducted Dissemination plan Dissemination plan Specific process knowledge on foam injection moulding Description of specific process knowledge on foam injection moulding for the production of multi-layer 2D geometries out of virgin and waste based materials. Report on material flow management and standardised transportation processes Report summarising the evaluation of different possibilities of transportation, along with the description of a concept for the material flow and quantities in dependence to available machines, trial plans and amount of testing. Guidelines for part and specimen characterisation and circular testing Report describing Guidelines for part and specimen characterisation and circular testing Fundamental process knowledge on rotational moulding Description of fundamental process knowledge on rotational moulding for the production of 2D geometries Final Public Project Report Final Public Report detailing project achievements, concrete results and exploitation potential Websites, patent fillings, videos etc. (1) Project Website and continuous presence in Social Media Project Website and continuous presence in Social Media Publications Conference proceedings (2) Influence of particle size in multi-layer rotational molding Author(s): Löhner, M.; Drummer, D. Published in: SPE ANTEC 2017, 2017 Publisher: ANTEC EFFECT OF FIBRE TYPE ON MECHANICAL PROPERTIES OF NONWOVEN REINFORCED TPU COMPOSITES Author(s): Muhammad Tausif, Tom O’Haire, Achilles Pliakas, Parikshit Goswami, Stephen J. Russell Published in: AUTEX World Textile Conference 2016, Issue 16th, 2016, ISBN 978-961-6900-17-1 Publisher: University of Ljubljana, Faculty of Sciences and Engineering, Department of Textiles, Graphic Arts and Design Peer reviewed articles (4) Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites Author(s): Muhammad Tausif, Achilles Pliakas, Tom O’Haire, Parikshit Goswami, Stephen J. Russell Published in: Materials, Issue 10/6, 2017, Page(s) 618, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma10060618 Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy Author(s): Martin Löhner, Dietmar Drummer Published in: Journal of Polymer Engineering, Issue 0/0, 2016, ISSN 0334-6447 Publisher: Freund Publishing House Ltd. DOI: 10.1515/polyeng-2016-0175 Experimental Studies on the Bonding Strength and Fracture Behavior of Incompatible Materials Bonded by Mechanical Adhesion in Multilayer Rotational Molding Author(s): Martin Löhner, Dietmar Drummer Published in: Journal of Polymers, Issue 2016, 2016, Page(s) 1-11, ISSN 2356-7570 Publisher: Hindawi Publishing Corporation DOI: 10.1155/2016/5768453 Optimierung der Verbundhaftung von mehrlagigen, rotationsgeformten Bauteilen durch Einbringen einer mehrphasigen Zwischenschicht Author(s): Martin Löhner, Dietmar Drummer Published in: Zeitschrift Kunststofftechnik, Issue 01/2017, 2017, ISSN 1864-2217 Publisher: Carl Hanser Verlag GmbH & Co. Thesis dissertations (1) Zum Rotationsformen mehrlagiger, duch mechanischer Adhäsion verbundener Systeme Author(s): Löhner, M. Published in: 2017, ISBN 978-3931-864712 Publisher: University Erlangen-Nuremberg Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available