Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

Waste-Based Rapid Adhesive-free Production of Sports goods

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Design-Knowledge Platform/Expert System - 2nd Prototype (odnośnik otworzy się w nowym oknie)

Design-Knowledge Platform/Expert System - 2nd Prototype, including advanced functionality and User Interface

Ecoeffiency analysis with second life supply for processes and products (odnośnik otworzy się w nowym oknie)

Ecoeffiency analysis with second life supply for at least 2 processes and products conducted

Dissemination plan (odnośnik otworzy się w nowym oknie)
Specific process knowledge on foam injection moulding (odnośnik otworzy się w nowym oknie)

Description of specific process knowledge on foam injection moulding for the production of multi-layer 2D geometries out of virgin and waste based materials.

Report on material flow management and standardised transportation processes (odnośnik otworzy się w nowym oknie)

Report summarising the evaluation of different possibilities of transportation, along with the description of a concept for the material flow and quantities in dependence to available machines, trial plans and amount of testing.

Guidelines for part and specimen characterisation and circular testing (odnośnik otworzy się w nowym oknie)

Report describing Guidelines for part and specimen characterisation and circular testing

Fundamental process knowledge on rotational moulding (odnośnik otworzy się w nowym oknie)

Description of fundamental process knowledge on rotational moulding for the production of 2D geometries

Final Public Project Report (odnośnik otworzy się w nowym oknie)

Final Public Report detailing project achievements, concrete results and exploitation potential

Publikacje

Influence of particle size in multi-layer rotational molding

Autorzy: Löhner, M.; Drummer, D.
Opublikowane w: SPE ANTEC 2017, 2017
Wydawca: ANTEC

EFFECT OF FIBRE TYPE ON MECHANICAL PROPERTIES OF NONWOVEN REINFORCED TPU COMPOSITES

Autorzy: Muhammad Tausif, Tom O’Haire, Achilles Pliakas, Parikshit Goswami, Stephen J. Russell
Opublikowane w: AUTEX World Textile Conference 2016, Numer 16th, 2016, ISBN 978-961-6900-17-1
Wydawca: University of Ljubljana, Faculty of Sciences and Engineering, Department of Textiles, Graphic Arts and Design

Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites (odnośnik otworzy się w nowym oknie)

Autorzy: Muhammad Tausif, Achilles Pliakas, Tom O’Haire, Parikshit Goswami, Stephen J. Russell
Opublikowane w: Materials, Numer 10/6, 2017, Strona(/y) 618, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma10060618

Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy (odnośnik otworzy się w nowym oknie)

Autorzy: Martin Löhner, Dietmar Drummer
Opublikowane w: Journal of Polymer Engineering, Numer 0/0, 2016, ISSN 0334-6447
Wydawca: Freund Publishing House Ltd.
DOI: 10.1515/polyeng-2016-0175

Experimental Studies on the Bonding Strength and Fracture Behavior of Incompatible Materials Bonded by Mechanical Adhesion in Multilayer Rotational Molding (odnośnik otworzy się w nowym oknie)

Autorzy: Martin Löhner, Dietmar Drummer
Opublikowane w: Journal of Polymers, Numer 2016, 2016, Strona(/y) 1-11, ISSN 2356-7570
Wydawca: Hindawi Publishing Corporation
DOI: 10.1155/2016/5768453

Optimierung der Verbundhaftung von mehrlagigen, rotationsgeformten Bauteilen durch Einbringen einer mehrphasigen Zwischenschicht

Autorzy: Martin Löhner, Dietmar Drummer
Opublikowane w: Zeitschrift Kunststofftechnik, Numer 01/2017, 2017, ISSN 1864-2217
Wydawca: Carl Hanser Verlag GmbH & Co.

Zum Rotationsformen mehrlagiger, duch mechanischer Adhäsion verbundener Systeme

Autorzy: Löhner, M.
Opublikowane w: 2017, ISBN 978-3931-864712
Wydawca: University Erlangen-Nuremberg

Wyszukiwanie danych OpenAIRE...

Podczas wyszukiwania danych OpenAIRE wystąpił błąd

Brak wyników

Moja broszura 0 0