Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Waste-Based Rapid Adhesive-free Production of Sports goods

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Design-Knowledge Platform/Expert System - 2nd Prototype (se abrirá en una nueva ventana)

Design-Knowledge Platform/Expert System - 2nd Prototype, including advanced functionality and User Interface

Ecoeffiency analysis with second life supply for processes and products (se abrirá en una nueva ventana)

Ecoeffiency analysis with second life supply for at least 2 processes and products conducted

Dissemination plan (se abrirá en una nueva ventana)
Specific process knowledge on foam injection moulding (se abrirá en una nueva ventana)

Description of specific process knowledge on foam injection moulding for the production of multi-layer 2D geometries out of virgin and waste based materials.

Report on material flow management and standardised transportation processes (se abrirá en una nueva ventana)

Report summarising the evaluation of different possibilities of transportation, along with the description of a concept for the material flow and quantities in dependence to available machines, trial plans and amount of testing.

Guidelines for part and specimen characterisation and circular testing (se abrirá en una nueva ventana)

Report describing Guidelines for part and specimen characterisation and circular testing

Fundamental process knowledge on rotational moulding (se abrirá en una nueva ventana)

Description of fundamental process knowledge on rotational moulding for the production of 2D geometries

Final Public Project Report (se abrirá en una nueva ventana)

Final Public Report detailing project achievements, concrete results and exploitation potential

Publicaciones

Influence of particle size in multi-layer rotational molding

Autores: Löhner, M.; Drummer, D.
Publicado en: SPE ANTEC 2017, 2017
Editor: ANTEC

EFFECT OF FIBRE TYPE ON MECHANICAL PROPERTIES OF NONWOVEN REINFORCED TPU COMPOSITES

Autores: Muhammad Tausif, Tom O’Haire, Achilles Pliakas, Parikshit Goswami, Stephen J. Russell
Publicado en: AUTEX World Textile Conference 2016, Edición 16th, 2016, ISBN 978-961-6900-17-1
Editor: University of Ljubljana, Faculty of Sciences and Engineering, Department of Textiles, Graphic Arts and Design

Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites (se abrirá en una nueva ventana)

Autores: Muhammad Tausif, Achilles Pliakas, Tom O’Haire, Parikshit Goswami, Stephen J. Russell
Publicado en: Materials, Edición 10/6, 2017, Página(s) 618, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma10060618

Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy (se abrirá en una nueva ventana)

Autores: Martin Löhner, Dietmar Drummer
Publicado en: Journal of Polymer Engineering, Edición 0/0, 2016, ISSN 0334-6447
Editor: Freund Publishing House Ltd.
DOI: 10.1515/polyeng-2016-0175

Experimental Studies on the Bonding Strength and Fracture Behavior of Incompatible Materials Bonded by Mechanical Adhesion in Multilayer Rotational Molding (se abrirá en una nueva ventana)

Autores: Martin Löhner, Dietmar Drummer
Publicado en: Journal of Polymers, Edición 2016, 2016, Página(s) 1-11, ISSN 2356-7570
Editor: Hindawi Publishing Corporation
DOI: 10.1155/2016/5768453

Optimierung der Verbundhaftung von mehrlagigen, rotationsgeformten Bauteilen durch Einbringen einer mehrphasigen Zwischenschicht

Autores: Martin Löhner, Dietmar Drummer
Publicado en: Zeitschrift Kunststofftechnik, Edición 01/2017, 2017, ISSN 1864-2217
Editor: Carl Hanser Verlag GmbH & Co.

Zum Rotationsformen mehrlagiger, duch mechanischer Adhäsion verbundener Systeme

Autores: Löhner, M.
Publicado en: 2017, ISBN 978-3931-864712
Editor: University Erlangen-Nuremberg

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles

Mi folleto 0 0