Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

Waste-Based Rapid Adhesive-free Production of Sports goods

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Design-Knowledge Platform/Expert System - 2nd Prototype (s’ouvre dans une nouvelle fenêtre)

Design-Knowledge Platform/Expert System - 2nd Prototype, including advanced functionality and User Interface

Ecoeffiency analysis with second life supply for processes and products (s’ouvre dans une nouvelle fenêtre)

Ecoeffiency analysis with second life supply for at least 2 processes and products conducted

Dissemination plan (s’ouvre dans une nouvelle fenêtre)
Specific process knowledge on foam injection moulding (s’ouvre dans une nouvelle fenêtre)

Description of specific process knowledge on foam injection moulding for the production of multi-layer 2D geometries out of virgin and waste based materials.

Report on material flow management and standardised transportation processes (s’ouvre dans une nouvelle fenêtre)

Report summarising the evaluation of different possibilities of transportation, along with the description of a concept for the material flow and quantities in dependence to available machines, trial plans and amount of testing.

Guidelines for part and specimen characterisation and circular testing (s’ouvre dans une nouvelle fenêtre)

Report describing Guidelines for part and specimen characterisation and circular testing

Fundamental process knowledge on rotational moulding (s’ouvre dans une nouvelle fenêtre)

Description of fundamental process knowledge on rotational moulding for the production of 2D geometries

Final Public Project Report (s’ouvre dans une nouvelle fenêtre)

Final Public Report detailing project achievements, concrete results and exploitation potential

Publications

Influence of particle size in multi-layer rotational molding

Auteurs: Löhner, M.; Drummer, D.
Publié dans: SPE ANTEC 2017, 2017
Éditeur: ANTEC

EFFECT OF FIBRE TYPE ON MECHANICAL PROPERTIES OF NONWOVEN REINFORCED TPU COMPOSITES

Auteurs: Muhammad Tausif, Tom O’Haire, Achilles Pliakas, Parikshit Goswami, Stephen J. Russell
Publié dans: AUTEX World Textile Conference 2016, Numéro 16th, 2016, ISBN 978-961-6900-17-1
Éditeur: University of Ljubljana, Faculty of Sciences and Engineering, Department of Textiles, Graphic Arts and Design

Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites (s’ouvre dans une nouvelle fenêtre)

Auteurs: Muhammad Tausif, Achilles Pliakas, Tom O’Haire, Parikshit Goswami, Stephen J. Russell
Publié dans: Materials, Numéro 10/6, 2017, Page(s) 618, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma10060618

Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy (s’ouvre dans une nouvelle fenêtre)

Auteurs: Martin Löhner, Dietmar Drummer
Publié dans: Journal of Polymer Engineering, Numéro 0/0, 2016, ISSN 0334-6447
Éditeur: Freund Publishing House Ltd.
DOI: 10.1515/polyeng-2016-0175

Experimental Studies on the Bonding Strength and Fracture Behavior of Incompatible Materials Bonded by Mechanical Adhesion in Multilayer Rotational Molding (s’ouvre dans une nouvelle fenêtre)

Auteurs: Martin Löhner, Dietmar Drummer
Publié dans: Journal of Polymers, Numéro 2016, 2016, Page(s) 1-11, ISSN 2356-7570
Éditeur: Hindawi Publishing Corporation
DOI: 10.1155/2016/5768453

Optimierung der Verbundhaftung von mehrlagigen, rotationsgeformten Bauteilen durch Einbringen einer mehrphasigen Zwischenschicht

Auteurs: Martin Löhner, Dietmar Drummer
Publié dans: Zeitschrift Kunststofftechnik, Numéro 01/2017, 2017, ISSN 1864-2217
Éditeur: Carl Hanser Verlag GmbH & Co.

Zum Rotationsformen mehrlagiger, duch mechanischer Adhäsion verbundener Systeme

Auteurs: Löhner, M.
Publié dans: 2017, ISBN 978-3931-864712
Éditeur: University Erlangen-Nuremberg

Recherche de données OpenAIRE...

Une erreur s’est produite lors de la recherche de données OpenAIRE

Aucun résultat disponible

Mon livret 0 0