Objectif
The project NANO-CATHEDRAL aims at developing, with a nano-metric scale approach, new materials, technologies and procedures for the conservation of deteriorated stones in monumental buildings and cathedrals and high value contemporary architecture, with a particular emphasis on the preservation of the originality and specificity of materials. The objective is providing “key tools” for restoration and conservation:
•On representative lithotypes
•On European representative climatic areas
•With a time-scale/environmental approach
•With technology validated in relevant environment (industrial plant and monuments)
•Exploiting results also on modern stone made buildings
A general protocol will be defined for the identification of the petrographic and mineralogical features of the stone materials, the identification of the degradation patterns, the evaluation of the causes and mechanisms of alteration and degradation, including the correlations between the relevant state of decay and the actual microclimatic and air pollution conditions.
Moreover, innovative nano-materials will be developed suitable for:
•Surface consolidation: in this case water-based formulations based on nano-inorganic or nano-hybrid dispersions such as nano-silica, nano-titania, nano-hydroxyapatite, nano-calcite and nano-magnesia as well as their synergic combinations with organic and inorganic compounds will be considered.
•Surface protection: in this case, innovative composites will be developed consisting of polymers and nano-fillers. The use of hydrophobins, nano-assembled hydrofobic proteins extracted from fungi, and photocatalytic nano-particles (for favoring the decomposition of volatile organic molecules carried by polluted atmosphere and to prevent biofilm growth) will be considered.
The project will contribute to the development of transnational cultural tourism and to the development of common European shared values and heritage, thus stimulating a greater sense of European identity.
Champ scientifique
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN.
- engineering and technologymaterials engineeringcolors
- engineering and technologymaterials engineeringcomposites
- natural scienceschemical sciencesinorganic chemistryinorganic compounds
- engineering and technologyenvironmental engineeringair pollution engineering
- engineering and technologynanotechnologynano-materials
Programme(s)
Thème(s)
Régime de financement
IA - Innovation actionCoordinateur
50121 Firenze
Italie
Voir sur la carte
Participants (20)
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
56126 Pisa
Voir sur la carte
56100 PISA
Voir sur la carte
42015 Correggio Re
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
00186 Roma
Voir sur la carte
50053 Sovigliana
Voir sur la carte
Entité juridique autre qu’un sous-traitant qui est affiliée ou juridiquement liée à un participant. L’entité réalise des travaux dans les conditions prévues par la convention de subvention, fournit des biens ou des services pour l’action, mais n’a pas signé la convention de subvention. Le tiers respecte les règles applicables au participant qui lui est lié dans le cadre de la convention de subvention en ce qui concerne l’éligibilité des coûts et le contrôle des dépenses.
50053 EMPOLI FI
Voir sur la carte
20068 PESCHIERA BORROMEO
Voir sur la carte
50667 KOLN
Voir sur la carte
96047 Bamberg
Voir sur la carte
76131 Karlsruhe
Voir sur la carte
86479 Aichen
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
01001 VITORIA GASTEIZ
Voir sur la carte
01001 Vitoria Gasteiz
Voir sur la carte
31210 Los Arcos
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
1010 WIEN
Voir sur la carte
1010 Wien
Voir sur la carte
1040 Wien
Voir sur la carte
9000 GENT
Voir sur la carte
9000 GENT
Voir sur la carte
L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.
0180 Oslo
Voir sur la carte