BIaxial STRETCHing of PLLA-WS2 nanocomposites FOR thinner and stronger BIOMEDical scaffolds

Project Information

Bi-Stretch-4-Biomed

Grant agreement ID: 691238

DOI 10.3030/691238

Project closed

EC signature date 11 November 2015

Start date 1 February 2016

End date 31 January 2020

Funded under

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Total cost € 400 500,00

EU contribution € 342 000,00

Coordinated by

AGENZIA NAZIONALE PER LE NUOVE TECNOLOGIE, L'ENERGIA E LO SVILUPPO ECONOMICO SOSTENIBILE
Italy

Deliverables

Websites, patent fillings, videos etc. (2)

Publication of the website

Creation of the logo and the website of the Action

Publications, Patents

Dissemination of the achievements through scientific publications on peer reviewed journals, conference proceedings, patent filing

Publications

Peer reviewed articles (6)

An investigation into the crystalline morphology transitions in poly-L- lactic acid (PLLA) under uniaxial deformation in the quasi-solid-state regime

Author(s): Kharmen Billimoria, Ellen L. Heeley, Nathan Parsons, Łukasz Figiel
Published in: European Polymer Journal, 2018, ISSN 0014-3057
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.eurpolymj.2018.01.031

Tube Expansion Deformation Enables In Situ Synchrotron X-ray Scattering Measurements during Extensional Flow-Induced Crystallization of Poly l-Lactide Near the Glass Transition

Author(s): Karthik Ramachandran, Riccardo Miscioscia, Giovanni Filippo, Giuseppe Pandolfi, Tiziana Di Luccio, Julia Kornfield
Published in: Polymers, Issue 10/3, 2018, Page(s) 288, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym10030288

Characterization and modelling the mechanical behaviour of poly(l-lactic acid) for the manufacture of bioresorbable vascular scaffolds by stretch blow moulding

Author(s): Huidong Wei, Shiyong Yan, Saurav Goel, Gary Menary
Published in: International Journal of Material Forming, 2019, ISSN 1960-6206
Publisher: Springer-Verlag France
DOI: 10.1007/s12289-018-01463-2

Characterisation and constitutive modelling of biaxially stretched poly(L-lactic acid) sheet for application in coronary stents

Author(s): R.W. Blair, N.J. Dunne, A.B. Lennon, G.H. Menary
Published in: Journal of the Mechanical Behavior of Biomedical Materials, Issue 97, 2019, Page(s) 346-354, ISSN 1751-6161
Publisher: Elsevier BV
DOI: 10.1016/j.jmbbm.2019.05.039

Multi-objective optimisation of material properties and strut geometry for poly(L-lactic acid) coronary stents using response surface methodology

Author(s): Ross W. Blair, Nicholas J. Dunne, Alex B. Lennon, Gary H. Menary
Published in: PLOS ONE, Issue 14/8, 2019, Page(s) e0218768, ISSN 1932-6203
Publisher: Public Library of Science
DOI: 10.1371/journal.pone.0218768

Processing-property relationships of biaxially stretched poly(L-lactic acid) sheet for application in coronary stents

Author(s): R.W. Blair, N.J. Dunne, A.B. Lennon, G.H. Menary
Published in: Journal of the Mechanical Behavior of Biomedical Materials, Issue 86, 2018, Page(s) 113-121, ISSN 1751-6161
Publisher: Elsevier BV
DOI: 10.1016/j.jmbbm.2018.06.017

Conference proceedings (9)

Modelling Mechanical Behaviour of Amorphous Poly (L-Lactic Acid) under Biaxial Stretch at Temperatures above Glass Transition

Author(s): H. Wei, G. Menary, S. Yan
Published in: Proceedings of SPE ANTEC 2017, 2017
Publisher: SPE

Parametric Optimisation of a Stretch Blow Moulded Poly(L-lactic acid) Stent

Author(s): Blair, R., Dunne, N., Lennon, A. and Menary, G
Published in: Bioengineering in Ireland 2018 Programme, 2018
Publisher: Dublin City University

Parametric Study to Evaluate the Effect of Strut Geometry on PLLA Coronary Stent Recoil

Author(s): Blair, R., Dunne, N., Lennon, A. and Menary, G
Published in: SIMULIA Science in the Age of Experience - Proceedings 2017, 2017, Page(s) 648–658
Publisher: 3ds

Investigation on thermomechanical properties of poly (l-lactic acid) for the stretch blow moulding process of bioresorbable vascular scaffold

Author(s): Huidong Wei, Gary Menary
Published in: AIP Conference Proceedings volume 1892, 2017, Page(s) 060002
Publisher: Author(s)
DOI: 10.1063/1.5008065

Effect of Processing History on the Mechanical Behaviour of PLLA Stents

Author(s): Blair, R., Dunne, N., Lennon, A. and Menary, G
Published in: Bioengineering in Ireland (23) Programme, 2017
Publisher: Queen's University Belfast

Modelling Mechanical Behaviour of Poly(L-lactic acid) for the Manufacture of Bioresorbable Vascular Scaffolds

Author(s): H. Wei, G. Menary
Published in: Proceedings of the 23rd Bioengineering in Ireland, 2017
Publisher: Queen's University Belfast

Investigating Biomechanics of Bioresorbable Coronary Stents

Author(s): Blair, R., Dunne, N., Lennon, A. and Menary, G
Published in: Bioengineering in Ireland (22) Book of Abstracts, 2016, Page(s) 161
Publisher: NUIG

Finite element analysis for the manufacture of angioplasty balloons

Author(s): H. Wei, G. Menary
Published in: Proceedings of the 22nd Bioengineering Conference in Ireland, 2016
Publisher: NUIG

Effect of tungsten disulfide (WS2) nanotubes on structural, morphological and mechanical properties of poly(L-lactide) (PLLA) films

Author(s): Loredana Tammaro, Tiziana Di Luccio, Carmela Borriello, Fausta Loffredo, Karthik Ramachandran, Fulvia Villani, Francesca Di Benedetto, Tara Schiller, Carla Minarini, Julia A. Kornfield
Published in: AIP Conference Proceedings volume 1981, 2018, Page(s) 020073
Publisher: AIP Publishing
DOI: 10.1063/1.5045935

Other (12)

Impact of Tungsten Disulfide Nanotubes on the crystallization of poly (l-lactide) for thinner and stronger bioresorbable vascular scaffolds (BVS)

Author(s): Tiziana Di Luccio, Karthik Ramachandran, Zach Zixuan Shao, Loredana Tammaro, Carmela Borriello, Fausta Loffredo, Fulvia Villani, Francesca Di Benedetto, Sandy Leung, Tony McNally, David Boyd, Julie Kornfield
Published in: Bulletin of the American Physical Society, 2018
Publisher: American Physical Society

Investigating Nanocomposites od Polylactide (PLA) and Tungsten Disulfide (WS2) for Thinner, Radio- Opaque Bioresorbable Vascular Scaffolds (BVS)

Author(s): E. E. Ruiz Bello, K. Ramachandran, T. Di Luccio and J. A. Kornfield
Published in: 2017
Publisher: N/A

In situ Synchrotron X-ray Scattering during Extensional Flow Induced Crystallization of PLLA Enabled by Tube Expansion Deformation

Author(s): T. Di Luccio, K. Ramachandran, R. Miscioscia, G. De Filippo, G. Pandolfi, and J. A. Kornfield
Published in: 3rd Joint AIC-SILS Conference - Rome, June 25-28, 2018, 2018
Publisher: N/A

Enabling Thinner, Radio-Opaque Bioresorbable Vascular Scaffolds Using Biocompatible Nanocomposites of Poly (L-lactide) and Tungsten Disulfide Nanotubes

Author(s): T. Di Luccio, K. Ramachandran, C. Borriello, F. Di Benedetto, T. L. Schiller, L. Tammaro, F. Villani, J. A. Kornfield
Published in: 2017 APS/CNM User Meeting, Argonne National Laboratories, May 8-11 (2017), 2017
Publisher: N/A

PLLA-WS2 nanocomposites for Bioresorbable Vascular Scaffolds

Author(s): Tiziana Di Luccio, Karthik Ramachandran, Julia A. Kornfield
Published in: 251st ACS National Meeting & Exposition, 2016
Publisher: N/A

Multiplicity of morphologies in poly (l-lactide) bioresorbable vascular scaffolds

Author(s): K. Ramachandran, J.A. Kornfield
Published in: The Society of Rheology, 2017
Publisher: N/A

Impact of Tungsten Disulfide Nanotubes on the crystallization of poly (l-lactide) for thinner and stronger bioresorbable vascular scaffolds (BVS)

Author(s): T. Di Luccio, K. Ramachandran, Z.Z. Shao, L. Tammaro, C. Borriello, F. Loffredo, F. Villani, F. Di Benedetto, S. Leung, T. McNally, D. Boyd, J.A. Kornfield
Published in: American Physical Society, 2018, 2018
Publisher: N/A

Experiment and Modelling on Biaxial Deformation of PLLA Materials Under Designed Strain History for Stretch Blow Moulding

Author(s): H. Wei, S. Yan, G. Menary, F. Buchanan
Published in: IMIOT and ICSEE, 2018
Publisher: N/A

Nanocomposites of Poly (L-lactide) and Tungsten Disulfide for new generation Bioresorbable Vascular Scaffolds

Author(s): T. Di Luccio, K. Ramachandran, Z. Shao, J.A. Kornfield
Published in: UCLA Bioscience Innovation Day, 2019
Publisher: N/A

In situ Synchrotron X-ray Scattering during Extensional Flow Induced Crystallization of PLLA Enabled by Tube Expansion Deformation

Author(s): K. Ramachandran, T. Di Luccio, R. Miscioscia, G. De Filippo, G. Pandolfi, J.A. Kornfield
Published in: The Society of Rheology 91st Annual Meeting, 2019
Publisher: N/A

Effect of tungsten disulfide nanotubes (WSNTs) on flow-induced crystallization of polylactide (PLA) for thinner and stronger bioresorbable vascular scaffolds

Author(s): K. Ramachandran, Z. Shao, T. Di Luccio, B. Shen, E.E. Ruiz Bello, L. Tammaro, F. Villani, F. Loffredo, C. Borriello, F. Di Benedetto, J.A. Kornfield
Published in: The Society of Rheology 91st Annual Meeting, 2019
Publisher: N/A

Flow induced crystallization of PLLA and PLLA-WS2 nanocomposites

Author(s): T. Di Luccio, K. Ramachandran, Z. Shao, J. A. Kornfield, R. Miscioscia, G. De Filippo, G. Pandolfi, L. Tammaro, C. Borriello, F. Loffredo, F. Villani, F. Di Benedetto
Published in: Flow Induced Crystallization Workshop, 2020
Publisher: N/A

Book chapters (1)

Experiment and Modelling on Biaxial Deformation of PLLA Materials Under Designed Strain History for Stretch Blow Moulding

Author(s): Huidong Wei, Gary Menary, Shiyong Yan, Fraser Buchanan
Published in: Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Chongqing, China, September 21-23, 2018, Proceedings, Part I, Issue 923, 2018, Page(s) 228-238, ISBN 978-981-13-2395-9
Publisher: Springer Singapore
DOI: 10.1007/978-981-13-2396-6_21