BIaxial STRETCHing of PLLA-WS2 nanocomposites FOR thinner and stronger BIOMEDical scaffolds

An investigation into the crystalline morphology transitions in poly-L- lactic acid (PLLA) under uniaxial deformation in the quasi-solid-state regime

Autori: Kharmen Billimoria, Ellen L. Heeley, Nathan Parsons, Łukasz Figiel
Pubblicato in: European Polymer Journal, 2018, ISSN 0014-3057
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.eurpolymj.2018.01.031

Tube Expansion Deformation Enables In Situ Synchrotron X-ray Scattering Measurements during Extensional Flow-Induced Crystallization of Poly l-Lactide Near the Glass Transition

Autori: Karthik Ramachandran, Riccardo Miscioscia, Giovanni Filippo, Giuseppe Pandolfi, Tiziana Di Luccio, Julia Kornfield
Pubblicato in: Polymers, Numero 10/3, 2018, Pagina/e 288, ISSN 2073-4360
Editore: MDPI
DOI: 10.3390/polym10030288

Characterization and modelling the mechanical behaviour of poly(l-lactic acid) for the manufacture of bioresorbable vascular scaffolds by stretch blow moulding

Autori: Huidong Wei, Shiyong Yan, Saurav Goel, Gary Menary
Pubblicato in: International Journal of Material Forming, 2019, ISSN 1960-6206
Editore: Springer-Verlag France
DOI: 10.1007/s12289-018-01463-2

Characterisation and constitutive modelling of biaxially stretched poly(L-lactic acid) sheet for application in coronary stents

Autori: R.W. Blair, N.J. Dunne, A.B. Lennon, G.H. Menary
Pubblicato in: Journal of the Mechanical Behavior of Biomedical Materials, Numero 97, 2019, Pagina/e 346-354, ISSN 1751-6161
Editore: Elsevier BV
DOI: 10.1016/j.jmbbm.2019.05.039

Multi-objective optimisation of material properties and strut geometry for poly(L-lactic acid) coronary stents using response surface methodology

Autori: Ross W. Blair, Nicholas J. Dunne, Alex B. Lennon, Gary H. Menary
Pubblicato in: PLOS ONE, Numero 14/8, 2019, Pagina/e e0218768, ISSN 1932-6203
Editore: Public Library of Science
DOI: 10.1371/journal.pone.0218768

Processing-property relationships of biaxially stretched poly(L-lactic acid) sheet for application in coronary stents

Autori: R.W. Blair, N.J. Dunne, A.B. Lennon, G.H. Menary
Pubblicato in: Journal of the Mechanical Behavior of Biomedical Materials, Numero 86, 2018, Pagina/e 113-121, ISSN 1751-6161
Editore: Elsevier BV
DOI: 10.1016/j.jmbbm.2018.06.017

Modelling Mechanical Behaviour of Amorphous Poly (L-Lactic Acid) under Biaxial Stretch at Temperatures above Glass Transition

Autori: H. Wei, G. Menary, S. Yan
Pubblicato in: Proceedings of SPE ANTEC 2017, 2017
Editore: SPE

Parametric Optimisation of a Stretch Blow Moulded Poly(L-lactic acid) Stent

Autori: Blair, R., Dunne, N., Lennon, A. and Menary, G
Pubblicato in: Bioengineering in Ireland 2018 Programme, 2018
Editore: Dublin City University

Parametric Study to Evaluate the Effect of Strut Geometry on PLLA Coronary Stent Recoil

Autori: Blair, R., Dunne, N., Lennon, A. and Menary, G
Pubblicato in: SIMULIA Science in the Age of Experience - Proceedings 2017, 2017, Pagina/e 648–658
Editore: 3ds

Investigation on thermomechanical properties of poly (l-lactic acid) for the stretch blow moulding process of bioresorbable vascular scaffold

Autori: Huidong Wei, Gary Menary
Pubblicato in: AIP Conference Proceedings volume 1892, 2017, Pagina/e 060002
Editore: Author(s)
DOI: 10.1063/1.5008065

Effect of Processing History on the Mechanical Behaviour of PLLA Stents

Autori: Blair, R., Dunne, N., Lennon, A. and Menary, G
Pubblicato in: Bioengineering in Ireland (23) Programme, 2017
Editore: Queen's University Belfast

Modelling Mechanical Behaviour of Poly(L-lactic acid) for the Manufacture of Bioresorbable Vascular Scaffolds

Autori: H. Wei, G. Menary
Pubblicato in: Proceedings of the 23rd Bioengineering in Ireland, 2017
Editore: Queen's University Belfast

Investigating Biomechanics of Bioresorbable Coronary Stents

Autori: Blair, R., Dunne, N., Lennon, A. and Menary, G
Pubblicato in: Bioengineering in Ireland (22) Book of Abstracts, 2016, Pagina/e 161
Editore: NUIG

Finite element analysis for the manufacture of angioplasty balloons

Autori: H. Wei, G. Menary
Pubblicato in: Proceedings of the 22nd Bioengineering Conference in Ireland, 2016
Editore: NUIG

Effect of tungsten disulfide (WS2) nanotubes on structural, morphological and mechanical properties of poly(L-lactide) (PLLA) films

Autori: Loredana Tammaro, Tiziana Di Luccio, Carmela Borriello, Fausta Loffredo, Karthik Ramachandran, Fulvia Villani, Francesca Di Benedetto, Tara Schiller, Carla Minarini, Julia A. Kornfield
Pubblicato in: AIP Conference Proceedings volume 1981, 2018, Pagina/e 020073
Editore: AIP Publishing
DOI: 10.1063/1.5045935

Impact of Tungsten Disulfide Nanotubes on the crystallization of poly (l-lactide) for thinner and stronger bioresorbable vascular scaffolds (BVS)

Autori: Tiziana Di Luccio, Karthik Ramachandran, Zach Zixuan Shao, Loredana Tammaro, Carmela Borriello, Fausta Loffredo, Fulvia Villani, Francesca Di Benedetto, Sandy Leung, Tony McNally, David Boyd, Julie Kornfield
Pubblicato in: Bulletin of the American Physical Society, 2018
Editore: American Physical Society

Investigating Nanocomposites od Polylactide (PLA) and Tungsten Disulfide (WS2) for Thinner, Radio- Opaque Bioresorbable Vascular Scaffolds (BVS)

Autori: E. E. Ruiz Bello, K. Ramachandran, T. Di Luccio and J. A. Kornfield
Pubblicato in: 2017
Editore: N/A

In situ Synchrotron X-ray Scattering during Extensional Flow Induced Crystallization of PLLA Enabled by Tube Expansion Deformation

Autori: T. Di Luccio, K. Ramachandran, R. Miscioscia, G. De Filippo, G. Pandolfi, and J. A. Kornfield
Pubblicato in: 3rd Joint AIC-SILS Conference - Rome, June 25-28, 2018, 2018
Editore: N/A

Enabling Thinner, Radio-Opaque Bioresorbable Vascular Scaffolds Using Biocompatible Nanocomposites of Poly (L-lactide) and Tungsten Disulfide Nanotubes

Autori: T. Di Luccio, K. Ramachandran, C. Borriello, F. Di Benedetto, T. L. Schiller, L. Tammaro, F. Villani, J. A. Kornfield
Pubblicato in: 2017 APS/CNM User Meeting, Argonne National Laboratories, May 8-11 (2017), 2017
Editore: N/A

PLLA-WS2 nanocomposites for Bioresorbable Vascular Scaffolds

Autori: Tiziana Di Luccio, Karthik Ramachandran, Julia A. Kornfield
Pubblicato in: 251st ACS National Meeting & Exposition, 2016
Editore: N/A

Multiplicity of morphologies in poly (l-lactide) bioresorbable vascular scaffolds

Autori: K. Ramachandran, J.A. Kornfield
Pubblicato in: The Society of Rheology, 2017
Editore: N/A

Impact of Tungsten Disulfide Nanotubes on the crystallization of poly (l-lactide) for thinner and stronger bioresorbable vascular scaffolds (BVS)

Autori: T. Di Luccio, K. Ramachandran, Z.Z. Shao, L. Tammaro, C. Borriello, F. Loffredo, F. Villani, F. Di Benedetto, S. Leung, T. McNally, D. Boyd, J.A. Kornfield
Pubblicato in: American Physical Society, 2018, 2018
Editore: N/A

Experiment and Modelling on Biaxial Deformation of PLLA Materials Under Designed Strain History for Stretch Blow Moulding

Autori: H. Wei, S. Yan, G. Menary, F. Buchanan
Pubblicato in: IMIOT and ICSEE, 2018
Editore: N/A

Nanocomposites of Poly (L-lactide) and Tungsten Disulfide for new generation Bioresorbable Vascular Scaffolds

Autori: T. Di Luccio, K. Ramachandran, Z. Shao, J.A. Kornfield
Pubblicato in: UCLA Bioscience Innovation Day, 2019
Editore: N/A

In situ Synchrotron X-ray Scattering during Extensional Flow Induced Crystallization of PLLA Enabled by Tube Expansion Deformation

Autori: K. Ramachandran, T. Di Luccio, R. Miscioscia, G. De Filippo, G. Pandolfi, J.A. Kornfield
Pubblicato in: The Society of Rheology 91st Annual Meeting, 2019
Editore: N/A

Effect of tungsten disulfide nanotubes (WSNTs) on flow-induced crystallization of polylactide (PLA) for thinner and stronger bioresorbable vascular scaffolds

Autori: K. Ramachandran, Z. Shao, T. Di Luccio, B. Shen, E.E. Ruiz Bello, L. Tammaro, F. Villani, F. Loffredo, C. Borriello, F. Di Benedetto, J.A. Kornfield
Pubblicato in: The Society of Rheology 91st Annual Meeting, 2019
Editore: N/A

Flow induced crystallization of PLLA and PLLA-WS2 nanocomposites

Autori: T. Di Luccio, K. Ramachandran, Z. Shao, J. A. Kornfield, R. Miscioscia, G. De Filippo, G. Pandolfi, L. Tammaro, C. Borriello, F. Loffredo, F. Villani, F. Di Benedetto
Pubblicato in: Flow Induced Crystallization Workshop, 2020
Editore: N/A

Experiment and Modelling on Biaxial Deformation of PLLA Materials Under Designed Strain History for Stretch Blow Moulding

Autori: Huidong Wei, Gary Menary, Shiyong Yan, Fraser Buchanan
Pubblicato in: Recent Advances in Intelligent Manufacturing - First International Conference on Intelligent Manufacturing and Internet of Things and 5th International Conference on Computing for Sustainable Energy and Environment, IMIOT and ICSEE 2018, Chongqing, China, September 21-23, 2018, Proceedings, Part I, Numero 923, 2018, Pagina/e 228-238, ISBN 978-981-13-2395-9
Editore: Springer Singapore
DOI: 10.1007/978-981-13-2396-6_21

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica