Resultado final Websites, patent fillings, videos etc. (10) International Summer/Winter School on multiscale modelling of materials under extreme conditions An International Summer/Winter School on multiscale modelling of materials under extreme conditions will be organized. News E-newsletter, flyers, posters and non-scientific publications concerning project events, activities and results News E-newsletter, flyers, posters and non-scientific publications concerning project events, activities and results will be elaborated and reported in Month 6, Month 1, Month 18, Month 25, Month 30 and Month 35. The SUPERMAT-KIC session at international conference EEEIC 2018 jointly with KIC Raw Materials A special session will be organized by ENEA in the international conference EEEIC 2018 (www.eeeic.net/eeeic/) jointly with the EIP KIC-raw materials. Innovative industry and KET integration workshop Organization and of a workshop on the role and actual state of the integration of KETs in innovative industry in different participating regions. SUPERMAT project website SUPERMAT project website will be launched and updating permanently. Final international conference in industrial forefront applications of new materials under extreme conditions. Report and open conclusions to be disseminated A final international conference in industrial forefront applications of new materials under extreme conditions will be organized with support from specialized subcontractor based on best value for money approach. . The report and open conclusions to be disseminated will be issued in Month 36. SUPERMAT Dissemination & Communication Plan The SUPERMAT Dissemination & Communication Plan will be elaborated with the contribution of all partners. International Summer/Winter School on manufacturing and synthesis of materials and coatings for extreme conditions applications A second International Summer/Winter School on manufacturing and synthesis of materials and coatings for extreme conditions applications will be organized under the coordination of CNRS-ICMCB with support from University of Bordeaux. International Massive Online Open Course (MOOC) on materials under extreme conditions A unique International Massive Online Open Course (MOOC) on materials under extreme conditions will be organized with support and of all participants. Industrial Workshop for innovation guidelines "An Workshop with participation of industrial partners members of the industrial board and other industry participants will be organized for establishing the innovation guidelines jointly with the COST Action CA 15012 ""Solutions for Critical Raw Materials Under Extreme Conditions-CRM Extreme"" in Burgos to enhance its international impact by attracting a higher number of industrial participants from more European Countries that will be invited to participate." Other (4) Specialized workshop involving experts in EU policy and international standards Organization of a specialized workshop involving experts in EU policy and international standards Implantation of standards as a service at IMNR for neighbouring key sectorial industry Implantation of the newly developed standards as a service at IMNR for neighbouring key sectorial industry International industrial PhD degree/curricula in common A new international industrial PhD degree / curricula for obtaining and characterisation of materials under extreme environmental conditions will be developed in common by participating academic institutions, with involving IMNR. Procedure for trainees selection Elaboration of the procedure selection of trainees that will participate in training activities. Documents, reports (1) List of publications of coordinator during the 3 years preceding the start date of the project List of publications of coordinator during the 3 years preceding the start date of the project. Publicaciones Peer reviewed articles (33) SUPERMAT - A virtual center for sustainable development of advanced materials operating under extreme conditions Autores: Radu R. Piticescu, Santiago Cuesta-Lopez, Antonio Rinaldi, Marina Urbina, Yi Qin, Peter Szakalos, Alain Largeteau Publicado en: physica status solidi (c), Issue 13/10-12, 2016, Page(s) 1023-1027, ISSN 1862-6351 Editor: Wiley - V C H Verlag GmbbH & Co. DOI: 10.1002/pssc.201600132 Solutions for Critical Raw Materials under Extreme Conditions: A Review Autores: Maria Grilli, Tiziano Bellezze, Ernst Gamsjäger, Antonio Rinaldi, Pavel Novak, Sebastian Balos, Radu Piticescu, Maria Ruello Publicado en: Materials, Issue 10/3, 2017, Page(s) 285, ISSN 1996-1944 Editor: MDPI Open Access Publishing DOI: 10.3390/ma10030285 Development of Novel Material Systems and Coatings for Extreme Environments: A Brief Overview Autores: Radu R. Piticescu, Marina Urbina, Antonio Rinaldi, Santiago Cuesta-Lopez, Arcadii Sobetkii Publicado en: JOM, Issue 71/2, 2019, Page(s) 683-690, ISSN 1047-4838 Editor: J O M Institute DOI: 10.1007/s11837-018-3273-6 3D Bioprinting of Hybrid Materials for Regenerative Medicine: Implementation in Innovative Small and Medium-Sized Enterprises (SMEs) Autores: Roxana Mioara Piticescu, Laura Madalina Cursaru, Dan Nastase Ciobota, Sinziana Istrate, Dumitru Ulieru Publicado en: JOM, Issue 71/2, 2019, Page(s) 662-672, ISSN 1047-4838 Editor: J O M Institute DOI: 10.1007/s11837-018-3252-y The methodologies and strategies for the development of novel material systems and coatings for applications in extreme environments − a critical review Autores: Marina Urbina, Antonio Rinaldi, Santiago Cuesta-Lopez, Arcadii Sobetkii, Anca Elena Slobozeanu, Peter Szakalos, Yi Qin, Mythili Prakasam, Radu-Robert Piticescu, Cedric Ducros, Alain Largeteau Publicado en: Manufacturing Review, Issue 5, 2018, Page(s) 9, ISSN 2265-4224 Editor: EDP Open DOI: 10.1051/mfreview/2018006 Recovery of metals from waste electrical and electronic equipment (WEEE) by anodic dissolution Autores: V. Soare, D. Dumitrescu, M. Burada, I. Constantin, V.I. Soare, P. Capota, A. M. J. Popescu, V. Constantin Publicado en: Revista de Chimie, Issue 67 (5), 2016, Page(s) 2490-2500, ISSN 2537-5733 Editor: SC Biblioteca Chimiei SA Electrochemical Synthesis of Borides and Silicides of Chromium, Molybdenum and Tungsten in Molten Salts Autores: V. Malyshev, D. Shakhnin, A. Gab, I. Astrelin, L. Molotovska, V. Soare, C. Donath, E. I. Neacsu, V. Constantin, A. M. Popescu Publicado en: Revista de Chimie, Issue 67 (12), 2016, Page(s) 2490-2500, ISSN 2537-5733 Editor: SC Biblioteca Chimiei SA Preparation of silica doped titania nanoparticles with thermal stability and photocatalytic properties and their application for leather surface functionalization Autores: Carmen Gaidau, Aurora Petica, Madalina Ignat, Laura Madalina Popescu, Roxana Mioara Piticescu, Ioan Albert Tudor, Radu Robert Piticescu Publicado en: Arabian Journal of Chemistry, Issue 10/7, 2017, Page(s) 985-1000, ISSN 1878-5352 Editor: King Saud University DOI: 10.1016/j.arabjc.2016.09.002 Iron oxide/PAMAM nanostructured hybrids: combined computational and experimental studies Autores: Marco Agostino Deriu, Laura Madalina Popescu, Maria Francesca Ottaviani, Andrea Danani, Roxana Mioara Piticescu Publicado en: Journal of Materials Science, Issue 51/4, 2016, Page(s) 1996-2007, ISSN 0022-2461 Editor: Kluwer Academic Publishers DOI: 10.1007/s10853-015-9509-8 Repair of the Orbital Wall Fractures in Rabbit Animal Model Using Nanostructured Hydroxyapatite-Based Implant Autores: Sinziana Gradinaru, Laura Popescu, Roxana Piticescu, Sabina Zurac, Radu Ciuluvica, Alexandrina Burlacu, Raluca Tutuianu, Sorina-Nicoleta Valsan, Adrian Motoc, Liliana Voinea Publicado en: Nanomaterials, Issue 6/1, 2016, Page(s) 11, ISSN 2079-4991 Editor: MDPI DOI: 10.3390/nano6010011 Functional properties improvement of Ag-ZnO thin films using Inconel 600 interlayer produced by electron beam evaporation technique Autores: Magdalena Valentina Lungu, Arcadie Sobetkii, Arcadii A. Sobetkii, Delia Pătroi, Paula Prioteasa, Ioana Ion, Constantin Cătălin Negrilă, Mariana Carmen Chifiriuc Publicado en: Thin Solid Films, Issue 667, 2018, Page(s) 76-87, ISSN 0040-6090 Editor: Elsevier Sequoia DOI: 10.1016/j.tsf.2018.09.055 Structural and Tribological Properties of Nanostructured Supersonic Cold Sprayed Ni-20 wt.% Sn Coatings Autores: E. P. Georgiou, S. Dosta, J. Fernández, P. Matteazzi, K. Kowalski, J. Kusinski, R. R. Piticescu, J.-P Celis Publicado en: Journal of Thermal Spray Technology, Issue 25/5, 2016, Page(s) 1029-1039, ISSN 1059-9630 Editor: ASM International DOI: 10.1007/s11666-016-0418-4 H2S selective sensitivity of Cu doped BaSrTiO3 under operando conditions and the associated sensing mechanism Autores: A. Stanoiu, R.M. Piticescu, C.E. Simion, C.F. Rusti-Ciobota, O.G. Florea, V.S. Teodorescu, P. Osiceanu, A. Sobetkii, V. Badilita Publicado en: Sensors and Actuators B: Chemical, Issue 264, 2018, Page(s) 327-336, ISSN 0925-4005 Editor: Elsevier BV DOI: 10.1016/j.snb.2018.03.013 In situ development of AlBx/AA6060 and AA5083 alloys cast composites Autores: P. Moldovan, D.V. Dragut, M. Butu, L.M. Besea, E.A. Preda Publicado en: Composites Part B: Engineering, Issue 97, 2016, Page(s) 9-17, ISSN 1359-8368 Editor: Pergamon Press Ltd. DOI: 10.1016/j.compositesb.2016.04.057 Development of a highly sensitive and selective molecularly imprinted electrochemical sensor for sulfaguanidine detection in honey samples Autores: Nadia El Alami El Hassani, Eduard Llobet, Laura-Madalina Popescu, Mihai Ghita, Benachir Bouchikhi, Nezha El Bari Publicado en: Journal of Electroanalytical Chemistry, Issue 823, 2018, Page(s) 647-655, ISSN 1572-6657 Editor: Elsevier BV DOI: 10.1016/j.jelechem.2018.07.011 Evaluation of the Ability of Nanostructured PEI-Coated Iron Oxide Nanoparticles to Incorporate Cisplatin during Synthesis Autores: Raluca Tutuianu, Laura Popescu, Mihai Preda, Ana-Maria Rosca, Roxana Piticescu, Alexandrina Burlacu Publicado en: Nanomaterials, Issue 7/10, 2017, Page(s) 314, ISSN 2079-4991 Editor: MDPI DOI: 10.3390/nano7100314 Thermodynamic properties of the Ba0.75Sr0.25TiO3 nanopowders obtained by hydrothermal synthesis Autores: C.F. Rusti, V. Badilita, A.M. Sofronia, D. Taloi, E.M. Anghel, F. Maxim, C. Hornoiu, C. Munteanu, R.M. Piticescu, S. Tanasescu Publicado en: Journal of Alloys and Compounds, Issue 693, 2017, Page(s) 1000-1010, ISSN 0925-8388 Editor: Elsevier BV DOI: 10.1016/j.jallcom.2016.09.215 Solvothermal method as a green chemistry solution for micro-encapsulation of phase change materials for high temperature thermal energy storage Autores: Albert Ioan Tudor, Adrian Mihail Motoc, Cristina Florentina Ciobota, Dan. Nastase Ciobota, Radu Robert Piticescu, Maria Dolores Romero-Sanchez Publicado en: Manufacturing Review, Issue 5, 2018, Page(s) 4, ISSN 2265-4224 Editor: EDP Open DOI: 10.1051/mfreview/2018004 Green chemistry solutions for sol–gel micro-encapsulation of phase change materials for high-temperature thermal energy storage Autores: Maria Dolores Romero-Sanchez, Radu-Robert Piticescu, Adrian Mihail Motoc, Francisca Aran-Ais, Albert Ioan Tudor Publicado en: Manufacturing Review, Issue 5, 2018, Page(s) 8, ISSN 2265-4224 Editor: MDP Open DOI: 10.1051/mfreview/2018003 Development of a novel electrochemical sensor based on electropolymerized molecularly imprinted polymer for selective detection of sodium lauryl sulfate in environmental waters and cosmetic products Autores: Soukaina Motia, Ioan Albert Tudor, L. Madalina Popescu, Roxana Mioara Piticescu, Benachir Bouchikhi, Nezha El Bari Publicado en: Journal of Electroanalytical Chemistry, Issue 823, 2018, Page(s) 553-562, ISSN 1572-6657 Editor: Elsevier BV DOI: 10.1016/j.jelechem.2018.03.069 Controlled changing of implantable bioinert materials biosurface Autores: E. Vasilescu, V. G .Vasilescu, I. Patracu, C. Fratila Publicado en: Romanian Journal of Materials, Issue 46 (1), 2016, Page(s) 11-16, ISSN 1583-3186 Editor: Procema Influence of remelting on microstructure, hardness and corrosion behaviour of AlCoCrFeNiTi high entropy alloy Autores: V. Soare, D. Mitrica, I. Constantin, V. Badilita, F. Stoiciu, A.-M. J. Popescu, I. Carcea Publicado en: Materials Science and Technology, Issue 02670836, 2015, Page(s) 1194-1200, ISSN 0267-0836 Editor: Maney Publishing DOI: 10.1179/1743284715Y.0000000029 In-situ synthesis and attachment of colloidal ZnO nanoparticles inside porous carbon structures Autores: Adrian Mihail Motoc, Ioan Albert Tudor, Mirela Petriceanu, Viorel Badilita, Elena Palomo del Barrio, Prasanta Jana, Vanessa Fierro, Alain Celzard, Radu Robert Piticescu Publicado en: Materials Chemistry and Physics, Issue 02540584, 2015, Page(s) 219-227, ISSN 0254-0584 Editor: Elsevier BV DOI: 10.1016/j.matchemphys.2015.05.039 Hydrothermal synthesis of nanostructured materials for energy harvesting applications Autores: Radu R. Piticescu, Adrian M. Motoc, Albert I. Tudor, Cristina F. Rusti, Roxana M. Piticescu, Maria D. Ramiro-Sanchez Publicado en: International Journal of Materials Chemistry and Physics, Issue Vol. 1, No. 1 , July 2015, 2015, Page(s) 31-42, ISSN 2471-9609 Editor: American Institute of Science The Mechanical and Corrosion Behaviors of as-cast and re-melted AlCrCuFeMnNi Multi-Component High-Entropy Alloy Autores: Vasile Soare, Dumitru Mitrica, Ionut Constantin, Gabriela Popescu, Ioana Csaki, Mihai Tarcolea, Ioan Carcea Publicado en: Metallurgical and Materials Transactions A, Issue 10735623, 2015, Page(s) 1468 -1473, ISSN 1073-5623 Editor: ASM International DOI: 10.1007/s11661-014-2523-7 Kinetic studies on the hydrothermal crystallization of Co-doped nanostructured TiO2 anatase with ferromagnetic properties Autores: Radu R. Piticescu, Sorina N. Valsan, Mirela Petriceanu, Viorel Badilita, Ioan A. Tudo, Dragos Taloi, Bogdan Vasile, Oana Raita Publicado en: JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, Issue Vol. 17, Issue: 5-6 / MAY-JUN 2015, 2015, Page(s) 646-654, ISSN 1454-4164 Editor: National Institute of Research and Development for Optoelectronics Synthesis and performance of Zn–Ni–P thin films Autores: V. Soare, M. Burada, I. Constantin, M. Ghita, V. Constantin, F. Miculescu, A. M. Popescu Publicado en: Chinese Physics B, Issue 16741056, 2015, Page(s) 036101, ISSN 1674-1056 Editor: Chinese Physical Society DOI: 10.1088/1674-1056/24/3/036101 Hydrothermal synthesis and characterization of rod-like co-doped anatase for spintronic applications Autores: Sorina N. Valsan, Ioan A. Tudor, Viorel Badilita, Bogdan Vasile, Oana Raita, Radu R. Piticescu Publicado en: OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, Issue Vol. 7, Issue: 11-12 / NOV-DEC 2013, 2013, Page(s) 1011-1014, ISSN 1842-6573 Editor: Institutul National de Cercetare-Dezvoltare pentru Optoelectronica Recent advances in synthesis, characterization of hydroxyapatite/polyurethane composites and study of their biocompatible properties Autores: L. M. Popescu, R. M. Piticescu, A. Antonelli, C. F. Rusti, E. Carboni, C. Sfara, M. Magnani, V. Badilita, E. Vasile, R. Trusca, T. Buruiana Publicado en: Journal of Materials Science: Materials in Medicine, Issue 09574530, 2013, Page(s) 2491-2503, ISSN 0957-4530 Editor: Kluwer Academic Publishers DOI: 10.1007/s10856-013-5005-3 Corrosion Protection of Steel Using ZnNiP Electroless Coatings Autores: Elena Ionela Neacsu, Virgil Constantin, Vasile Soare, Petre Osiceanu, Mihai V. Popa, Ana Maria Popescu Publicado en: Revista de Chimie, Issue Vol 64, Issue 9 / Sep. 2013, 2013, Page(s) 994-999, ISSN 0034-7752 Editor: Syscom 18 s.r.l. Structural and tribological properties of supersonic sprayed Fe-Cu-Al-Al2O3 nanostructured cermets Autores: E.P. Georgiou, S. Achanta, S. Dosta, J. Fernandez, P. Matteazzi, J. Kusinski, R.R.Piticescu, J-P. Celis Publicado en: APPLIED SURFACE SCIENCE, Issue 01694332, 2013, Page(s) 142-147, ISSN 0169-4332 Editor: Elsevier BV DOI: 10.1016/j.apsusc.2013.01.072 Co environment and magnetic defects in anatase CoxTi1-O-x(2) nanopowders Autores: M.N. Grecu, D. Macovei, D. Ghica, C. Logofatu, S. Valsan, N.G. Apostol, G.A. Lungu, R.F. Negrea, R.R. Piticescu Publicado en: APPLIED PHYSICS LETTERS, Issue 00036951, 2013, ISSN 0003-6951 Editor: American Institute of Physics DOI: 10.1063/1.4802819 Synthesis and characterization of acid polyurethane-hydroxyapatite composites for biomedical applications Autores: L.M. Popescu, C.F. Rusti, R.M. Piticescu, T. Buruiana, T. Valeros, S. Kintzios Publicado en: JOURNAL OF COMPOSITE MATERIALS, Issue 00219983, 2013, Page(s) 603-612, ISSN 0021-9983 Editor: SAGE Publications DOI: 10.1177/0021998312443396 Conference proceedings (2) Structural transformations of heat treated Co-less high entropy alloys Autores: Mitrica, D., Tudor, A., Rinaldi, A., Stoiciu, F., Badilita, V Publicado en: IOP Conference Series: Materials Science and Engineering, Issue 329(1), 2018, Page(s) 012011 Editor: IOP Possible alternatives to critical elements in coatings for extreme applications Autores: Grilli, M.L., Valerini, D., Piticescu, R.R., Cuesta-López, S., Rizzo, A. Publicado en: IOP Conference Series: Materials Science and Engineering, Issue 329(1), 2018, Page(s) 012005 Editor: IOP Book chapters (2) Fabrication Methodologies of Biomimetic and Bioactive Scaffolds for Tissue Engineering Applications Autores: Mythili Prakasam, Madalina Popescu, Roxana Piticescu, Alain Largeteau Publicado en: Scaffolds in Tissue Engineering - Materials, Technologies and Clinical Applications, 2017, ISBN 978-953-51-3641-5 Editor: InTech DOI: 10.5772/intechopen.70707 Nanostructured Pure and Doped Zirconia: Synthesis and Sintering for SOFC and Optical Applications Autores: Mythili Prakasam, Sorina Valsan, Yiying Lu, Felix Balima, Wenzhong Lu, Radu Piticescu, Alain Largeteau Publicado en: Sintering Technology - Method and Application, 2018, ISBN 978-1-78984-281-4 Editor: InTech DOI: 10.5772/intechopen.81323 Buscando datos de OpenAIRE... Se ha producido un error en la búsqueda de datos de OpenAIRE No hay resultados disponibles
