The VIRTUAL Centre for Integration of INNOVATIVE synthesis and Processing methods for SUSTAINABLE advanced Materials operating under Extreme Conditions

Rezultaty

International Summer/Winter School on multiscale modelling of materials under extreme conditions

An International Summer/Winter School on multiscale modelling of materials under extreme conditions will be organized.

News E-newsletter, flyers, posters and non-scientific publications concerning project events, activities and results

News E-newsletter, flyers, posters and non-scientific publications concerning project events, activities and results will be elaborated and reported in Month 6, Month 1, Month 18, Month 25, Month 30 and Month 35.

The SUPERMAT-KIC session at international conference EEEIC 2018 jointly with KIC Raw Materials

A special session will be organized by ENEA in the international conference EEEIC 2018 (www.eeeic.net/eeeic/) jointly with the EIP KIC-raw materials.

Innovative industry and KET integration workshop

Organization and of a workshop on the role and actual state of the integration of KETs in innovative industry in different participating regions.

SUPERMAT project website

SUPERMAT project website will be launched and updating permanently.

Final international conference in industrial forefront applications of new materials under extreme conditions. Report and open conclusions to be disseminated

A final international conference in industrial forefront applications of new materials under extreme conditions will be organized with support from specialized subcontractor based on best value for money approach. . The report and open conclusions to be disseminated will be issued in Month 36.

SUPERMAT Dissemination & Communication Plan

The SUPERMAT Dissemination & Communication Plan will be elaborated with the contribution of all partners.

International Summer/Winter School on manufacturing and synthesis of materials and coatings for extreme conditions applications

A second International Summer/Winter School on manufacturing and synthesis of materials and coatings for extreme conditions applications will be organized under the coordination of CNRS-ICMCB with support from University of Bordeaux.

International Massive Online Open Course (MOOC) on materials under extreme conditions

A unique International Massive Online Open Course (MOOC) on materials under extreme conditions will be organized with support and of all participants.

Industrial Workshop for innovation guidelines

"An Workshop with participation of industrial partners members of the industrial board and other industry participants will be organized for establishing the innovation guidelines jointly with the COST Action CA 15012 ""Solutions for Critical Raw Materials Under Extreme Conditions-CRM Extreme"" in Burgos to enhance its international impact by attracting a higher number of industrial participants from more European Countries that will be invited to participate."

Specialized workshop involving experts in EU policy and international standards

Organization of a specialized workshop involving experts in EU policy and international standards

Implantation of standards as a service at IMNR for neighbouring key sectorial industry

Implantation of the newly developed standards as a service at IMNR for neighbouring key sectorial industry

International industrial PhD degree/curricula in common

A new international industrial PhD degree / curricula for obtaining and characterisation of materials under extreme environmental conditions will be developed in common by participating academic institutions, with involving IMNR.

Procedure for trainees selection

Elaboration of the procedure selection of trainees that will participate in training activities.

List of publications of coordinator during the 3 years preceding the start date of the project

List of publications of coordinator during the 3 years preceding the start date of the project.

Publikacje

SUPERMAT - A virtual center for sustainable development of advanced materials operating under extreme conditions

Autorzy: Radu R. Piticescu, Santiago Cuesta-Lopez, Antonio Rinaldi, Marina Urbina, Yi Qin, Peter Szakalos, Alain Largeteau
Opublikowane w: physica status solidi (c), Numer 13/10-12, 2016, Strona(/y) 1023-1027, ISSN 1862-6351
Wydawca: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssc.201600132

Solutions for Critical Raw Materials under Extreme Conditions: A Review

Autorzy: Maria Grilli, Tiziano Bellezze, Ernst Gamsjäger, Antonio Rinaldi, Pavel Novak, Sebastian Balos, Radu Piticescu, Maria Ruello
Opublikowane w: Materials, Numer 10/3, 2017, Strona(/y) 285, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma10030285

Development of Novel Material Systems and Coatings for Extreme Environments: A Brief Overview

Autorzy: Radu R. Piticescu, Marina Urbina, Antonio Rinaldi, Santiago Cuesta-Lopez, Arcadii Sobetkii
Opublikowane w: JOM, Numer 71/2, 2019, Strona(/y) 683-690, ISSN 1047-4838
Wydawca: J O M Institute
DOI: 10.1007/s11837-018-3273-6

3D Bioprinting of Hybrid Materials for Regenerative Medicine: Implementation in Innovative Small and Medium-Sized Enterprises (SMEs)

Autorzy: Roxana Mioara Piticescu, Laura Madalina Cursaru, Dan Nastase Ciobota, Sinziana Istrate, Dumitru Ulieru
Opublikowane w: JOM, Numer 71/2, 2019, Strona(/y) 662-672, ISSN 1047-4838
Wydawca: J O M Institute
DOI: 10.1007/s11837-018-3252-y

The methodologies and strategies for the development of novel material systems and coatings for applications in extreme environments − a critical review

Autorzy: Marina Urbina, Antonio Rinaldi, Santiago Cuesta-Lopez, Arcadii Sobetkii, Anca Elena Slobozeanu, Peter Szakalos, Yi Qin, Mythili Prakasam, Radu-Robert Piticescu, Cedric Ducros, Alain Largeteau
Opublikowane w: Manufacturing Review, Numer 5, 2018, Strona(/y) 9, ISSN 2265-4224
Wydawca: EDP Open
DOI: 10.1051/mfreview/2018006

Recovery of metals from waste electrical and electronic equipment (WEEE) by anodic dissolution

Autorzy: V. Soare, D. Dumitrescu, M. Burada, I. Constantin, V.I. Soare, P. Capota, A. M. J. Popescu, V. Constantin
Opublikowane w: Revista de Chimie, Numer 67 (5), 2016, Strona(/y) 2490-2500, ISSN 2537-5733
Wydawca: SC Biblioteca Chimiei SA

Electrochemical Synthesis of Borides and Silicides of Chromium, Molybdenum and Tungsten in Molten Salts

Autorzy: V. Malyshev, D. Shakhnin, A. Gab, I. Astrelin, L. Molotovska, V. Soare, C. Donath, E. I. Neacsu, V. Constantin, A. M. Popescu
Opublikowane w: Revista de Chimie, Numer 67 (12), 2016, Strona(/y) 2490-2500, ISSN 2537-5733
Wydawca: SC Biblioteca Chimiei SA

Preparation of silica doped titania nanoparticles with thermal stability and photocatalytic properties and their application for leather surface functionalization

Autorzy: Carmen Gaidau, Aurora Petica, Madalina Ignat, Laura Madalina Popescu, Roxana Mioara Piticescu, Ioan Albert Tudor, Radu Robert Piticescu
Opublikowane w: Arabian Journal of Chemistry, Numer 10/7, 2017, Strona(/y) 985-1000, ISSN 1878-5352
Wydawca: King Saud University
DOI: 10.1016/j.arabjc.2016.09.002

Iron oxide/PAMAM nanostructured hybrids: combined computational and experimental studies

Autorzy: Marco Agostino Deriu, Laura Madalina Popescu, Maria Francesca Ottaviani, Andrea Danani, Roxana Mioara Piticescu
Opublikowane w: Journal of Materials Science, Numer 51/4, 2016, Strona(/y) 1996-2007, ISSN 0022-2461
Wydawca: Kluwer Academic Publishers
DOI: 10.1007/s10853-015-9509-8

Repair of the Orbital Wall Fractures in Rabbit Animal Model Using Nanostructured Hydroxyapatite-Based Implant

Autorzy: Sinziana Gradinaru, Laura Popescu, Roxana Piticescu, Sabina Zurac, Radu Ciuluvica, Alexandrina Burlacu, Raluca Tutuianu, Sorina-Nicoleta Valsan, Adrian Motoc, Liliana Voinea
Opublikowane w: Nanomaterials, Numer 6/1, 2016, Strona(/y) 11, ISSN 2079-4991
Wydawca: MDPI
DOI: 10.3390/nano6010011

Functional properties improvement of Ag-ZnO thin films using Inconel 600 interlayer produced by electron beam evaporation technique

Autorzy: Magdalena Valentina Lungu, Arcadie Sobetkii, Arcadii A. Sobetkii, Delia Pătroi, Paula Prioteasa, Ioana Ion, Constantin Cătălin Negrilă, Mariana Carmen Chifiriuc
Opublikowane w: Thin Solid Films, Numer 667, 2018, Strona(/y) 76-87, ISSN 0040-6090
Wydawca: Elsevier Sequoia
DOI: 10.1016/j.tsf.2018.09.055

Structural and Tribological Properties of Nanostructured Supersonic Cold Sprayed Ni-20 wt.% Sn Coatings

Autorzy: E. P. Georgiou, S. Dosta, J. Fernández, P. Matteazzi, K. Kowalski, J. Kusinski, R. R. Piticescu, J.-P Celis
Opublikowane w: Journal of Thermal Spray Technology, Numer 25/5, 2016, Strona(/y) 1029-1039, ISSN 1059-9630
Wydawca: ASM International
DOI: 10.1007/s11666-016-0418-4

H2S selective sensitivity of Cu doped BaSrTiO3 under operando conditions and the associated sensing mechanism

Autorzy: A. Stanoiu, R.M. Piticescu, C.E. Simion, C.F. Rusti-Ciobota, O.G. Florea, V.S. Teodorescu, P. Osiceanu, A. Sobetkii, V. Badilita
Opublikowane w: Sensors and Actuators B: Chemical, Numer 264, 2018, Strona(/y) 327-336, ISSN 0925-4005
Wydawca: Elsevier BV
DOI: 10.1016/j.snb.2018.03.013

In situ development of AlBx/AA6060 and AA5083 alloys cast composites

Autorzy: P. Moldovan, D.V. Dragut, M. Butu, L.M. Besea, E.A. Preda
Opublikowane w: Composites Part B: Engineering, Numer 97, 2016, Strona(/y) 9-17, ISSN 1359-8368
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2016.04.057

Development of a highly sensitive and selective molecularly imprinted electrochemical sensor for sulfaguanidine detection in honey samples

Autorzy: Nadia El Alami El Hassani, Eduard Llobet, Laura-Madalina Popescu, Mihai Ghita, Benachir Bouchikhi, Nezha El Bari
Opublikowane w: Journal of Electroanalytical Chemistry, Numer 823, 2018, Strona(/y) 647-655, ISSN 1572-6657
Wydawca: Elsevier BV
DOI: 10.1016/j.jelechem.2018.07.011

Evaluation of the Ability of Nanostructured PEI-Coated Iron Oxide Nanoparticles to Incorporate Cisplatin during Synthesis

Autorzy: Raluca Tutuianu, Laura Popescu, Mihai Preda, Ana-Maria Rosca, Roxana Piticescu, Alexandrina Burlacu
Opublikowane w: Nanomaterials, Numer 7/10, 2017, Strona(/y) 314, ISSN 2079-4991
Wydawca: MDPI
DOI: 10.3390/nano7100314

Thermodynamic properties of the Ba0.75Sr0.25TiO3 nanopowders obtained by hydrothermal synthesis

Autorzy: C.F. Rusti, V. Badilita, A.M. Sofronia, D. Taloi, E.M. Anghel, F. Maxim, C. Hornoiu, C. Munteanu, R.M. Piticescu, S. Tanasescu
Opublikowane w: Journal of Alloys and Compounds, Numer 693, 2017, Strona(/y) 1000-1010, ISSN 0925-8388
Wydawca: Elsevier BV
DOI: 10.1016/j.jallcom.2016.09.215

Solvothermal method as a green chemistry solution for micro-encapsulation of phase change materials for high temperature thermal energy storage

Autorzy: Albert Ioan Tudor, Adrian Mihail Motoc, Cristina Florentina Ciobota, Dan. Nastase Ciobota, Radu Robert Piticescu, Maria Dolores Romero-Sanchez
Opublikowane w: Manufacturing Review, Numer 5, 2018, Strona(/y) 4, ISSN 2265-4224
Wydawca: EDP Open
DOI: 10.1051/mfreview/2018004

Green chemistry solutions for sol–gel micro-encapsulation of phase change materials for high-temperature thermal energy storage

Autorzy: Maria Dolores Romero-Sanchez, Radu-Robert Piticescu, Adrian Mihail Motoc, Francisca Aran-Ais, Albert Ioan Tudor
Opublikowane w: Manufacturing Review, Numer 5, 2018, Strona(/y) 8, ISSN 2265-4224
Wydawca: MDP Open
DOI: 10.1051/mfreview/2018003

Development of a novel electrochemical sensor based on electropolymerized molecularly imprinted polymer for selective detection of sodium lauryl sulfate in environmental waters and cosmetic products

Autorzy: Soukaina Motia, Ioan Albert Tudor, L. Madalina Popescu, Roxana Mioara Piticescu, Benachir Bouchikhi, Nezha El Bari
Opublikowane w: Journal of Electroanalytical Chemistry, Numer 823, 2018, Strona(/y) 553-562, ISSN 1572-6657
Wydawca: Elsevier BV
DOI: 10.1016/j.jelechem.2018.03.069

Controlled changing of implantable bioinert materials biosurface

Autorzy: E. Vasilescu, V. G .Vasilescu, I. Patracu, C. Fratila
Opublikowane w: Romanian Journal of Materials, Numer 46 (1), 2016, Strona(/y) 11-16, ISSN 1583-3186
Wydawca: Procema

Influence of remelting on microstructure, hardness and corrosion behaviour of AlCoCrFeNiTi high entropy alloy

Autorzy: V. Soare, D. Mitrica, I. Constantin, V. Badilita, F. Stoiciu, A.-M. J. Popescu, I. Carcea
Opublikowane w: Materials Science and Technology, Numer 02670836, 2015, Strona(/y) 1194-1200, ISSN 0267-0836
Wydawca: Maney Publishing
DOI: 10.1179/1743284715Y.0000000029

In-situ synthesis and attachment of colloidal ZnO nanoparticles inside porous carbon structures

Autorzy: Adrian Mihail Motoc, Ioan Albert Tudor, Mirela Petriceanu, Viorel Badilita, Elena Palomo del Barrio, Prasanta Jana, Vanessa Fierro, Alain Celzard, Radu Robert Piticescu
Opublikowane w: Materials Chemistry and Physics, Numer 02540584, 2015, Strona(/y) 219-227, ISSN 0254-0584
Wydawca: Elsevier BV
DOI: 10.1016/j.matchemphys.2015.05.039

Hydrothermal synthesis of nanostructured materials for energy harvesting applications

Autorzy: Radu R. Piticescu, Adrian M. Motoc, Albert I. Tudor, Cristina F. Rusti, Roxana M. Piticescu, Maria D. Ramiro-Sanchez
Opublikowane w: International Journal of Materials Chemistry and Physics, Numer Vol. 1, No. 1 , July 2015, 2015, Strona(/y) 31-42, ISSN 2471-9609
Wydawca: American Institute of Science

The Mechanical and Corrosion Behaviors of as-cast and re-melted AlCrCuFeMnNi Multi-Component High-Entropy Alloy

Autorzy: Vasile Soare, Dumitru Mitrica, Ionut Constantin, Gabriela Popescu, Ioana Csaki, Mihai Tarcolea, Ioan Carcea
Opublikowane w: Metallurgical and Materials Transactions A, Numer 10735623, 2015, Strona(/y) 1468 -1473, ISSN 1073-5623
Wydawca: ASM International
DOI: 10.1007/s11661-014-2523-7

Kinetic studies on the hydrothermal crystallization of Co-doped nanostructured TiO2 anatase with ferromagnetic properties

Autorzy: Radu R. Piticescu, Sorina N. Valsan, Mirela Petriceanu, Viorel Badilita, Ioan A. Tudo, Dragos Taloi, Bogdan Vasile, Oana Raita
Opublikowane w: JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, Numer Vol. 17, Numer: 5-6 / MAY-JUN 2015, 2015, Strona(/y) 646-654, ISSN 1454-4164
Wydawca: National Institute of Research and Development for Optoelectronics

Synthesis and performance of Zn–Ni–P thin films

Autorzy: V. Soare, M. Burada, I. Constantin, M. Ghita, V. Constantin, F. Miculescu, A. M. Popescu
Opublikowane w: Chinese Physics B, Numer 16741056, 2015, Strona(/y) 036101, ISSN 1674-1056
Wydawca: Chinese Physical Society
DOI: 10.1088/1674-1056/24/3/036101

Hydrothermal synthesis and characterization of rod-like co-doped anatase for spintronic applications

Autorzy: Sorina N. Valsan, Ioan A. Tudor, Viorel Badilita, Bogdan Vasile, Oana Raita, Radu R. Piticescu
Opublikowane w: OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, Numer Vol. 7, Numer: 11-12 / NOV-DEC 2013, 2013, Strona(/y) 1011-1014, ISSN 1842-6573
Wydawca: Institutul National de Cercetare-Dezvoltare pentru Optoelectronica

Recent advances in synthesis, characterization of hydroxyapatite/polyurethane composites and study of their biocompatible properties

Autorzy: L. M. Popescu, R. M. Piticescu, A. Antonelli, C. F. Rusti, E. Carboni, C. Sfara, M. Magnani, V. Badilita, E. Vasile, R. Trusca, T. Buruiana
Opublikowane w: Journal of Materials Science: Materials in Medicine, Numer 09574530, 2013, Strona(/y) 2491-2503, ISSN 0957-4530
Wydawca: Kluwer Academic Publishers
DOI: 10.1007/s10856-013-5005-3

Corrosion Protection of Steel Using ZnNiP Electroless Coatings

Autorzy: Elena Ionela Neacsu, Virgil Constantin, Vasile Soare, Petre Osiceanu, Mihai V. Popa, Ana Maria Popescu
Opublikowane w: Revista de Chimie, Numer Vol 64, Numer 9 / Sep. 2013, 2013, Strona(/y) 994-999, ISSN 0034-7752
Wydawca: Syscom 18 s.r.l.

Structural and tribological properties of supersonic sprayed Fe-Cu-Al-Al2O3 nanostructured cermets

Autorzy: E.P. Georgiou, S. Achanta, S. Dosta, J. Fernandez, P. Matteazzi, J. Kusinski, R.R.Piticescu, J-P. Celis
Opublikowane w: APPLIED SURFACE SCIENCE, Numer 01694332, 2013, Strona(/y) 142-147, ISSN 0169-4332
Wydawca: Elsevier BV
DOI: 10.1016/j.apsusc.2013.01.072

Co environment and magnetic defects in anatase CoxTi1-O-x(2) nanopowders

Autorzy: M.N. Grecu, D. Macovei, D. Ghica, C. Logofatu, S. Valsan, N.G. Apostol, G.A. Lungu, R.F. Negrea, R.R. Piticescu
Opublikowane w: APPLIED PHYSICS LETTERS, Numer 00036951, 2013, ISSN 0003-6951
Wydawca: American Institute of Physics
DOI: 10.1063/1.4802819

Synthesis and characterization of acid polyurethane-hydroxyapatite composites for biomedical applications

Autorzy: L.M. Popescu, C.F. Rusti, R.M. Piticescu, T. Buruiana, T. Valeros, S. Kintzios
Opublikowane w: JOURNAL OF COMPOSITE MATERIALS, Numer 00219983, 2013, Strona(/y) 603-612, ISSN 0021-9983
Wydawca: SAGE Publications
DOI: 10.1177/0021998312443396

Structural transformations of heat treated Co-less high entropy alloys

Autorzy: Mitrica, D., Tudor, A., Rinaldi, A., Stoiciu, F., Badilita, V
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 329(1), 2018, Strona(/y) 012011
Wydawca: IOP

Possible alternatives to critical elements in coatings for extreme applications

Autorzy: Grilli, M.L., Valerini, D., Piticescu, R.R., Cuesta-López, S., Rizzo, A.
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 329(1), 2018, Strona(/y) 012005
Wydawca: IOP

Fabrication Methodologies of Biomimetic and Bioactive Scaffolds for Tissue Engineering Applications

Autorzy: Mythili Prakasam, Madalina Popescu, Roxana Piticescu, Alain Largeteau
Opublikowane w: Scaffolds in Tissue Engineering - Materials, Technologies and Clinical Applications, 2017, ISBN 978-953-51-3641-5
Wydawca: InTech
DOI: 10.5772/intechopen.70707

Nanostructured Pure and Doped Zirconia: Synthesis and Sintering for SOFC and Optical Applications

Autorzy: Mythili Prakasam, Sorina Valsan, Yiying Lu, Felix Balima, Wenzhong Lu, Radu Piticescu, Alain Largeteau
Opublikowane w: Sintering Technology - Method and Application, 2018, ISBN 978-1-78984-281-4
Wydawca: InTech
DOI: 10.5772/intechopen.81323

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz