The VIRTUAL Centre for Integration of INNOVATIVE synthesis and Processing methods for SUSTAINABLE advanced Materials operating under Extreme Conditions

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

International Summer/Winter School on multiscale modelling of materials under extreme conditions

An International Summer/Winter School on multiscale modelling of materials under extreme conditions will be organized.

News E-newsletter, flyers, posters and non-scientific publications concerning project events, activities and results

News E-newsletter, flyers, posters and non-scientific publications concerning project events, activities and results will be elaborated and reported in Month 6, Month 1, Month 18, Month 25, Month 30 and Month 35.

The SUPERMAT-KIC session at international conference EEEIC 2018 jointly with KIC Raw Materials

A special session will be organized by ENEA in the international conference EEEIC 2018 (www.eeeic.net/eeeic/) jointly with the EIP KIC-raw materials.

Innovative industry and KET integration workshop

Organization and of a workshop on the role and actual state of the integration of KETs in innovative industry in different participating regions.

SUPERMAT project website

SUPERMAT project website will be launched and updating permanently.

Final international conference in industrial forefront applications of new materials under extreme conditions. Report and open conclusions to be disseminated

A final international conference in industrial forefront applications of new materials under extreme conditions will be organized with support from specialized subcontractor based on best value for money approach. . The report and open conclusions to be disseminated will be issued in Month 36.

SUPERMAT Dissemination & Communication Plan

The SUPERMAT Dissemination & Communication Plan will be elaborated with the contribution of all partners.

International Summer/Winter School on manufacturing and synthesis of materials and coatings for extreme conditions applications

A second International Summer/Winter School on manufacturing and synthesis of materials and coatings for extreme conditions applications will be organized under the coordination of CNRS-ICMCB with support from University of Bordeaux.

International Massive Online Open Course (MOOC) on materials under extreme conditions

A unique International Massive Online Open Course (MOOC) on materials under extreme conditions will be organized with support and of all participants.

Industrial Workshop for innovation guidelines

"An Workshop with participation of industrial partners members of the industrial board and other industry participants will be organized for establishing the innovation guidelines jointly with the COST Action CA 15012 ""Solutions for Critical Raw Materials Under Extreme Conditions-CRM Extreme"" in Burgos to enhance its international impact by attracting a higher number of industrial participants from more European Countries that will be invited to participate."

Specialized workshop involving experts in EU policy and international standards

Organization of a specialized workshop involving experts in EU policy and international standards

Implantation of standards as a service at IMNR for neighbouring key sectorial industry

Implantation of the newly developed standards as a service at IMNR for neighbouring key sectorial industry

International industrial PhD degree/curricula in common

A new international industrial PhD degree / curricula for obtaining and characterisation of materials under extreme environmental conditions will be developed in common by participating academic institutions, with involving IMNR.

Procedure for trainees selection

Elaboration of the procedure selection of trainees that will participate in training activities.

List of publications of coordinator during the 3 years preceding the start date of the project

List of publications of coordinator during the 3 years preceding the start date of the project.

Pubblicazioni

Hydrothermal synthesis and characterization of rod-like co-doped anatase for spintronic applications

Autori: Sorina N. Valsan, Ioan A. Tudor, Viorel Badilita, Bogdan Vasile, Oana Raita, Radu R. Piticescu
Pubblicato in: OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, Numero Vol. 7, Numero: 11-12 / NOV-DEC 2013, 2013, Pagina/e 1011-1014, ISSN 1842-6573
Editore: Institutul National de Cercetare-Dezvoltare pentru Optoelectronica

Recent advances in synthesis, characterization of hydroxyapatite/polyurethane composites and study of their biocompatible properties

Autori: L. M. Popescu, R. M. Piticescu, A. Antonelli, C. F. Rusti, E. Carboni, C. Sfara, M. Magnani, V. Badilita, E. Vasile, R. Trusca, T. Buruiana
Pubblicato in: Journal of Materials Science: Materials in Medicine, Numero 24/11, 2013, Pagina/e 2491-2503, ISSN 0957-4530
Editore: Kluwer Academic Publishers
DOI: 10.1007/s10856-013-5005-3

Synthesis and performance of Zn–Ni–P thin films

Autori: V. Soare, M. Burada, I. Constantin, M. Ghita, V. Constantin, F. Miculescu, A. M. Popescu
Pubblicato in: Chinese Physics B, Numero 24/3, 2015, Pagina/e 036101, ISSN 1674-1056
Editore: Chinese Physical Society
DOI: 10.1088/1674-1056/24/3/036101

The Mechanical and Corrosion Behaviors of as-cast and re-melted AlCrCuFeMnNi Multi-Component High-Entropy Alloy

Autori: Vasile Soare, Dumitru Mitrica, Ionut Constantin, Gabriela Popescu, Ioana Csaki, Mihai Tarcolea, Ioan Carcea
Pubblicato in: Metallurgical and Materials Transactions A, Numero Vol. 46, Numero 4 / April 2015, 2015, Pagina/e 1468 -1473, ISSN 1073-5623
Editore: ASM International
DOI: 10.1007/s11661-014-2523-7

Structural and tribological properties of supersonic sprayed Fe-Cu-Al-Al2O3 nanostructured cermets

Autori: E.P. Georgiou, S. Achanta, S. Dosta, J. Fernandez, P. Matteazzi, J. Kusinski, R.R.Piticescu, J-P. Celis
Pubblicato in: APPLIED SURFACE SCIENCE, Numero Vol. 275, 2013, Pagina/e 142-147, ISSN 0169-4332
Editore: Elsevier BV
DOI: 10.1016/j.apsusc.2013.01.072

Influence of remelting on microstructure, hardness and corrosion behaviour of AlCoCrFeNiTi high entropy alloy

Autori: V. Soare, D. Mitrica, I. Constantin, V. Badilita, F. Stoiciu, A.-M. J. Popescu, I. Carcea
Pubblicato in: Materials Science and Technology, Numero 31/10, 2015, Pagina/e 1194-1200, ISSN 0267-0836
Editore: Maney Publishing
DOI: 10.1179/1743284715Y.0000000029

SUPERMAT - A virtual center for sustainable development of advanced materials operating under extreme conditions

Autori: Radu R. Piticescu, Santiago Cuesta-Lopez, Antonio Rinaldi, Marina Urbina, Yi Qin, Peter Szakalos, Alain Largeteau
Pubblicato in: physica status solidi (c), Numero 13/10-12, 2016, Pagina/e 1023-1027, ISSN 1862-6351
Editore: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssc.201600132

Solutions for Critical Raw Materials under Extreme Conditions: A Review

Autori: Maria Grilli, Tiziano Bellezze, Ernst Gamsjäger, Antonio Rinaldi, Pavel Novak, Sebastian Balos, Radu Piticescu, Maria Ruello
Pubblicato in: Materials, Numero 10/3, 2017, Pagina/e 285, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma10030285

Development of Novel Material Systems and Coatings for Extreme Environments: A Brief Overview

Autori: Radu R. Piticescu, Marina Urbina, Antonio Rinaldi, Santiago Cuesta-Lopez, Arcadii Sobetkii
Pubblicato in: JOM, Numero 71/2, 2019, Pagina/e 683-690, ISSN 1047-4838
Editore: J O M Institute
DOI: 10.1007/s11837-018-3273-6

3D Bioprinting of Hybrid Materials for Regenerative Medicine: Implementation in Innovative Small and Medium-Sized Enterprises (SMEs)

Autori: Roxana Mioara Piticescu, Laura Madalina Cursaru, Dan Nastase Ciobota, Sinziana Istrate, Dumitru Ulieru
Pubblicato in: JOM, Numero 71/2, 2019, Pagina/e 662-672, ISSN 1047-4838
Editore: J O M Institute
DOI: 10.1007/s11837-018-3252-y

The methodologies and strategies for the development of novel material systems and coatings for applications in extreme environments − a critical review

Autori: Marina Urbina, Antonio Rinaldi, Santiago Cuesta-Lopez, Arcadii Sobetkii, Anca Elena Slobozeanu, Peter Szakalos, Yi Qin, Mythili Prakasam, Radu-Robert Piticescu, Cedric Ducros, Alain Largeteau
Pubblicato in: Manufacturing Review, Numero 5, 2018, Pagina/e 9, ISSN 2265-4224
Editore: EDP Open
DOI: 10.1051/mfreview/2018006

Recovery of metals from waste electrical and electronic equipment (WEEE) by anodic dissolution

Autori: V. Soare, D. Dumitrescu, M. Burada, I. Constantin, V.I. Soare, P. Capota, A. M. J. Popescu, V. Constantin
Pubblicato in: Revista de Chimie, Numero 67 (5), 2016, Pagina/e 2490-2500, ISSN 2537-5733
Editore: SC Biblioteca Chimiei SA

Electrochemical Synthesis of Borides and Silicides of Chromium, Molybdenum and Tungsten in Molten Salts

Autori: V. Malyshev, D. Shakhnin, A. Gab, I. Astrelin, L. Molotovska, V. Soare, C. Donath, E. I. Neacsu, V. Constantin, A. M. Popescu
Pubblicato in: Revista de Chimie, Numero 67 (12), 2016, Pagina/e 2490-2500, ISSN 2537-5733
Editore: SC Biblioteca Chimiei SA

Preparation of silica doped titania nanoparticles with thermal stability and photocatalytic properties and their application for leather surface functionalization

Autori: Carmen Gaidau, Aurora Petica, Madalina Ignat, Laura Madalina Popescu, Roxana Mioara Piticescu, Ioan Albert Tudor, Radu Robert Piticescu
Pubblicato in: Arabian Journal of Chemistry, Numero 10/7, 2017, Pagina/e 985-1000, ISSN 1878-5352
Editore: King Saud University
DOI: 10.1016/j.arabjc.2016.09.002

Iron oxide/PAMAM nanostructured hybrids: combined computational and experimental studies

Autori: Marco Agostino Deriu, Laura Madalina Popescu, Maria Francesca Ottaviani, Andrea Danani, Roxana Mioara Piticescu
Pubblicato in: Journal of Materials Science, Numero 51/4, 2016, Pagina/e 1996-2007, ISSN 0022-2461
Editore: Kluwer Academic Publishers
DOI: 10.1007/s10853-015-9509-8

Repair of the Orbital Wall Fractures in Rabbit Animal Model Using Nanostructured Hydroxyapatite-Based Implant

Autori: Sinziana Gradinaru, Laura Popescu, Roxana Piticescu, Sabina Zurac, Radu Ciuluvica, Alexandrina Burlacu, Raluca Tutuianu, Sorina-Nicoleta Valsan, Adrian Motoc, Liliana Voinea
Pubblicato in: Nanomaterials, Numero 6/1, 2016, Pagina/e 11, ISSN 2079-4991
Editore: MDPI
DOI: 10.3390/nano6010011

Functional properties improvement of Ag-ZnO thin films using Inconel 600 interlayer produced by electron beam evaporation technique

Autori: Magdalena Valentina Lungu, Arcadie Sobetkii, Arcadii A. Sobetkii, Delia Pătroi, Paula Prioteasa, Ioana Ion, Constantin Cătălin Negrilă, Mariana Carmen Chifiriuc
Pubblicato in: Thin Solid Films, Numero 667, 2018, Pagina/e 76-87, ISSN 0040-6090
Editore: Elsevier Sequoia
DOI: 10.1016/j.tsf.2018.09.055

Structural and Tribological Properties of Nanostructured Supersonic Cold Sprayed Ni-20 wt.% Sn Coatings

Autori: E. P. Georgiou, S. Dosta, J. Fernández, P. Matteazzi, K. Kowalski, J. Kusinski, R. R. Piticescu, J.-P Celis
Pubblicato in: Journal of Thermal Spray Technology, Numero 25/5, 2016, Pagina/e 1029-1039, ISSN 1059-9630
Editore: ASM International
DOI: 10.1007/s11666-016-0418-4

H2S selective sensitivity of Cu doped BaSrTiO3 under operando conditions and the associated sensing mechanism

Autori: A. Stanoiu, R.M. Piticescu, C.E. Simion, C.F. Rusti-Ciobota, O.G. Florea, V.S. Teodorescu, P. Osiceanu, A. Sobetkii, V. Badilita
Pubblicato in: Sensors and Actuators B: Chemical, Numero 264, 2018, Pagina/e 327-336, ISSN 0925-4005
Editore: Elsevier BV
DOI: 10.1016/j.snb.2018.03.013

In situ development of AlBx/AA6060 and AA5083 alloys cast composites

Autori: P. Moldovan, D.V. Dragut, M. Butu, L.M. Besea, E.A. Preda
Pubblicato in: Composites Part B: Engineering, Numero 97, 2016, Pagina/e 9-17, ISSN 1359-8368
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2016.04.057

Development of a highly sensitive and selective molecularly imprinted electrochemical sensor for sulfaguanidine detection in honey samples

Autori: Nadia El Alami El Hassani, Eduard Llobet, Laura-Madalina Popescu, Mihai Ghita, Benachir Bouchikhi, Nezha El Bari
Pubblicato in: Journal of Electroanalytical Chemistry, Numero 823, 2018, Pagina/e 647-655, ISSN 1572-6657
Editore: Elsevier BV
DOI: 10.1016/j.jelechem.2018.07.011

Evaluation of the Ability of Nanostructured PEI-Coated Iron Oxide Nanoparticles to Incorporate Cisplatin during Synthesis

Autori: Raluca Tutuianu, Laura Popescu, Mihai Preda, Ana-Maria Rosca, Roxana Piticescu, Alexandrina Burlacu
Pubblicato in: Nanomaterials, Numero 7/10, 2017, Pagina/e 314, ISSN 2079-4991
Editore: MDPI
DOI: 10.3390/nano7100314

Thermodynamic properties of the Ba0.75Sr0.25TiO3 nanopowders obtained by hydrothermal synthesis

Autori: C.F. Rusti, V. Badilita, A.M. Sofronia, D. Taloi, E.M. Anghel, F. Maxim, C. Hornoiu, C. Munteanu, R.M. Piticescu, S. Tanasescu
Pubblicato in: Journal of Alloys and Compounds, Numero 693, 2017, Pagina/e 1000-1010, ISSN 0925-8388
Editore: Elsevier BV
DOI: 10.1016/j.jallcom.2016.09.215

Solvothermal method as a green chemistry solution for micro-encapsulation of phase change materials for high temperature thermal energy storage

Autori: Albert Ioan Tudor, Adrian Mihail Motoc, Cristina Florentina Ciobota, Dan. Nastase Ciobota, Radu Robert Piticescu, Maria Dolores Romero-Sanchez
Pubblicato in: Manufacturing Review, Numero 5, 2018, Pagina/e 4, ISSN 2265-4224
Editore: EDP Open
DOI: 10.1051/mfreview/2018004

Green chemistry solutions for sol–gel micro-encapsulation of phase change materials for high-temperature thermal energy storage

Autori: Maria Dolores Romero-Sanchez, Radu-Robert Piticescu, Adrian Mihail Motoc, Francisca Aran-Ais, Albert Ioan Tudor
Pubblicato in: Manufacturing Review, Numero 5, 2018, Pagina/e 8, ISSN 2265-4224
Editore: MDP Open
DOI: 10.1051/mfreview/2018003

Development of a novel electrochemical sensor based on electropolymerized molecularly imprinted polymer for selective detection of sodium lauryl sulfate in environmental waters and cosmetic products

Autori: Soukaina Motia, Ioan Albert Tudor, L. Madalina Popescu, Roxana Mioara Piticescu, Benachir Bouchikhi, Nezha El Bari
Pubblicato in: Journal of Electroanalytical Chemistry, Numero 823, 2018, Pagina/e 553-562, ISSN 1572-6657
Editore: Elsevier BV
DOI: 10.1016/j.jelechem.2018.03.069

Controlled changing of implantable bioinert materials biosurface

Autori: E. Vasilescu, V. G .Vasilescu, I. Patracu, C. Fratila
Pubblicato in: Romanian Journal of Materials, Numero 46 (1), 2016, Pagina/e 11-16, ISSN 1583-3186
Editore: Procema

Influence of remelting on microstructure, hardness and corrosion behaviour of AlCoCrFeNiTi high entropy alloy

Autori: V. Soare, D. Mitrica, I. Constantin, V. Badilita, F. Stoiciu, A.-M. J. Popescu, I. Carcea
Pubblicato in: Materials Science and Technology, Numero 02670836, 2015, Pagina/e 1194-1200, ISSN 0267-0836
Editore: Maney Publishing
DOI: 10.1179/1743284715Y.0000000029

In-situ synthesis and attachment of colloidal ZnO nanoparticles inside porous carbon structures

Autori: Adrian Mihail Motoc, Ioan Albert Tudor, Mirela Petriceanu, Viorel Badilita, Elena Palomo del Barrio, Prasanta Jana, Vanessa Fierro, Alain Celzard, Radu Robert Piticescu
Pubblicato in: Materials Chemistry and Physics, Numero 02540584, 2015, Pagina/e 219-227, ISSN 0254-0584
Editore: Elsevier BV
DOI: 10.1016/j.matchemphys.2015.05.039

Hydrothermal synthesis of nanostructured materials for energy harvesting applications

Autori: Radu R. Piticescu, Adrian M. Motoc, Albert I. Tudor, Cristina F. Rusti, Roxana M. Piticescu, Maria D. Ramiro-Sanchez
Pubblicato in: International Journal of Materials Chemistry and Physics, Numero Vol. 1, No. 1 , July 2015, 2015, Pagina/e 31-42, ISSN 2471-9609
Editore: American Institute of Science

The Mechanical and Corrosion Behaviors of as-cast and re-melted AlCrCuFeMnNi Multi-Component High-Entropy Alloy

Autori: Vasile Soare, Dumitru Mitrica, Ionut Constantin, Gabriela Popescu, Ioana Csaki, Mihai Tarcolea, Ioan Carcea
Pubblicato in: Metallurgical and Materials Transactions A, Numero 10735623, 2015, Pagina/e 1468 -1473, ISSN 1073-5623
Editore: ASM International
DOI: 10.1007/s11661-014-2523-7

Kinetic studies on the hydrothermal crystallization of Co-doped nanostructured TiO2 anatase with ferromagnetic properties

Autori: Radu R. Piticescu, Sorina N. Valsan, Mirela Petriceanu, Viorel Badilita, Ioan A. Tudo, Dragos Taloi, Bogdan Vasile, Oana Raita
Pubblicato in: JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, Numero Vol. 17, Numero: 5-6 / MAY-JUN 2015, 2015, Pagina/e 646-654, ISSN 1454-4164
Editore: National Institute of Research and Development for Optoelectronics

Synthesis and performance of Zn–Ni–P thin films

Autori: V. Soare, M. Burada, I. Constantin, M. Ghita, V. Constantin, F. Miculescu, A. M. Popescu
Pubblicato in: Chinese Physics B, Numero 16741056, 2015, Pagina/e 036101, ISSN 1674-1056
Editore: Chinese Physical Society
DOI: 10.1088/1674-1056/24/3/036101

Hydrothermal synthesis and characterization of rod-like co-doped anatase for spintronic applications

Recent advances in synthesis, characterization of hydroxyapatite/polyurethane composites and study of their biocompatible properties

Autori: L. M. Popescu, R. M. Piticescu, A. Antonelli, C. F. Rusti, E. Carboni, C. Sfara, M. Magnani, V. Badilita, E. Vasile, R. Trusca, T. Buruiana
Pubblicato in: Journal of Materials Science: Materials in Medicine, Numero 09574530, 2013, Pagina/e 2491-2503, ISSN 0957-4530
Editore: Kluwer Academic Publishers
DOI: 10.1007/s10856-013-5005-3

Corrosion Protection of Steel Using ZnNiP Electroless Coatings

Autori: Elena Ionela Neacsu, Virgil Constantin, Vasile Soare, Petre Osiceanu, Mihai V. Popa, Ana Maria Popescu
Pubblicato in: Revista de Chimie, Numero Vol 64, Numero 9 / Sep. 2013, 2013, Pagina/e 994-999, ISSN 0034-7752
Editore: Syscom 18 s.r.l.

Structural and tribological properties of supersonic sprayed Fe-Cu-Al-Al2O3 nanostructured cermets

Autori: E.P. Georgiou, S. Achanta, S. Dosta, J. Fernandez, P. Matteazzi, J. Kusinski, R.R.Piticescu, J-P. Celis
Pubblicato in: APPLIED SURFACE SCIENCE, Numero 01694332, 2013, Pagina/e 142-147, ISSN 0169-4332
Editore: Elsevier BV
DOI: 10.1016/j.apsusc.2013.01.072

Co environment and magnetic defects in anatase CoxTi1-O-x(2) nanopowders

Autori: M.N. Grecu, D. Macovei, D. Ghica, C. Logofatu, S. Valsan, N.G. Apostol, G.A. Lungu, R.F. Negrea, R.R. Piticescu
Pubblicato in: APPLIED PHYSICS LETTERS, Numero 00036951, 2013, ISSN 0003-6951
Editore: American Institute of Physics
DOI: 10.1063/1.4802819

Synthesis and characterization of acid polyurethane-hydroxyapatite composites for biomedical applications

Autori: L.M. Popescu, C.F. Rusti, R.M. Piticescu, T. Buruiana, T. Valeros, S. Kintzios
Pubblicato in: JOURNAL OF COMPOSITE MATERIALS, Numero 00219983, 2013, Pagina/e 603-612, ISSN 0021-9983
Editore: SAGE Publications
DOI: 10.1177/0021998312443396

In-situ synthesis and attachment of colloidal ZnO nanoparticles inside porous carbon structures

Autori: Adrian Mihail Motoc, Ioan Albert Tudor, Mirela Petriceanu, Viorel Badilita, Elena Palomo del Barrio, Prasanta Jana, Vanessa Fierro, Alain Celzard, Radu Robert Piticescu
Pubblicato in: Materials Chemistry and Physics, Numero 161, 2015, Pagina/e 219-227, ISSN 0254-0584
Editore: Elsevier BV
DOI: 10.1016/j.matchemphys.2015.05.039

Hydrothermal synthesis of nanostructured materials for energy harvesting applications

Corrosion Protection of Steel Using ZnNiP Electroless Coatings

Co environment and magnetic defects in anatase CoxTi1-O-x(2) nanopowders

Autori: M.N. Grecu, D. Macovei, D. Ghica, C. Logofatu, S. Valsan, N.G. Apostol, G.A. Lungu, R.F. Negrea, R.R. Piticescu
Pubblicato in: APPLIED PHYSICS LETTERS, Numero Vol. 102, Numero:16 / APR 2013, 2013, ISSN 0003-6951
Editore: American Institute of Physics
DOI: 10.1063/1.4802819

Kinetic studies on the hydrothermal crystallization of Co-doped nanostructured TiO2 anatase with ferromagnetic properties

Synthesis and characterization of acid polyurethane-hydroxyapatite composites for biomedical applications

Autori: L.M. Popescu, C.F. Rusti, R.M. Piticescu, T. Buruiana, T. Valeros, S. Kintzios
Pubblicato in: JOURNAL OF COMPOSITE MATERIALS, Numero Vol. 47 Numero: 5 / MAR 2013, 2013, Pagina/e 603-612, ISSN 0021-9983
Editore: SAGE Publications
DOI: 10.1177/0021998312443396

Structural transformations of heat treated Co-less high entropy alloys

Autori: Mitrica, D., Tudor, A., Rinaldi, A., Stoiciu, F., Badilita, V
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 329(1), 2018, Pagina/e 012011
Editore: IOP

Possible alternatives to critical elements in coatings for extreme applications

Autori: Grilli, M.L., Valerini, D., Piticescu, R.R., Cuesta-López, S., Rizzo, A.
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 329(1), 2018, Pagina/e 012005
Editore: IOP

Fabrication Methodologies of Biomimetic and Bioactive Scaffolds for Tissue Engineering Applications

Autori: Mythili Prakasam, Madalina Popescu, Roxana Piticescu, Alain Largeteau
Pubblicato in: Scaffolds in Tissue Engineering - Materials, Technologies and Clinical Applications, 2017, ISBN 978-953-51-3641-5
Editore: InTech
DOI: 10.5772/intechopen.70707

Nanostructured Pure and Doped Zirconia: Synthesis and Sintering for SOFC and Optical Applications

Autori: Mythili Prakasam, Sorina Valsan, Yiying Lu, Felix Balima, Wenzhong Lu, Radu Piticescu, Alain Largeteau
Pubblicato in: Sintering Technology - Method and Application, 2018, ISBN 978-1-78984-281-4
Editore: InTech
DOI: 10.5772/intechopen.81323

È in corso la ricerca di dati su OpenAIRE...

Risultati finali

Pubblicazioni

Condividi questa pagina Condividi questa pagina sui social network

Scarica Scarica il contenuto della pagina