Energy and Resource Efficient, Highly Innovative Solution Integrating Punching and Laser Coil Technology for Metal Manufacturing Industry

Informazioni relative al progetto

Efficoil

ID dell’accordo di sovvenzione: 718618

DOI 10.3030/718618

Progetto chiuso

Data della firma CE 27 Febbraio 2016

Data di avvio 1 Febbraio 2016

Data di completamento 31 Maggio 2016

Finanziato da

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Costo totale € 71 429,00

Contributo UE € 50 000,00

Coordinato da

PRODUTECH SRL
Italy

Obiettivo

The innovative system will be able to interact on a single machine the processes of: (1) punching and forming sheet metal using mechanical tool, and (2) the cutting of sheet metal parts by means of a laser source with fiber of high brilliance. The metal plate being machined on the machine is being fed from coil, which is also loaded on a specific equipment, which composes the plant and allows the end user to work continuously in the sheet metal strip. A mechatronic actuator uses only power required to work to do, no positioning moves made at full power and therefore no waste of energy that becomes heat dissipated into the environment. Also, there are not liquid pollutants such us hydraulic oil or lubrication. - Performance improved for each industrial process High energy savings- up to 50% to standard punching technologies.

Campo scientifico

• engineering and technology › materials engineering › fibers
• engineering and technology › mechanical engineering › tribology › lubrication
• agricultural sciences › agriculture, forestry, and fisheries › agriculture
• natural sciences › physical sciences › optics › laser physics
• humanities › philosophy, ethics and religion › philosophy

Programma(i)

• H2020-EU.3.3. - SOCIETAL CHALLENGES - Secure, clean and efficient energy Main Programme
• H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument

Argomento(i)

• SIE-01-2015-1 - Stimulating the innovation potential of SMEs for a low carbon energy system

Invito a presentare proposte

H2020-SMEInst-2014-2015

Vedi altri progetti per questo bando

Bando secondario

H2020-SMEINST-1-2015

Meccanismo di finanziamento

SME-1 - SME instrument phase 1

Coordinatore

PRODUTECH SRL

• Contribution nette de l'UE: € 50 000,00
• Indirizzo: VIA TONALE 15 ; 24061 ALBANO SANT'ALESSANDRO (BG) ; Italia
• PMI L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione. Sì:
  Regione
  Nord-Ovest › Lombardia › Bergamo
• Regione: Nord-Ovest › Lombardia › Bergamo
• Tipo di attività: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Costo totale: € 71 429,00