Obiettivo In order to improve the surface quality of steel products and to achieve high-energy savings in hot rolling plants, it is necessary to control the atmosphere in each zone inside the reheating furnaces reliably. The aim of the planned research project is to develop an improved control system for the air-fuel ratio in each zone using combustion gas analysis and model- supported process control. Real-time determination of physical characteristics is also needed to adjust the global air-fuel-ratio of furnaces. A feed-forward strategy for improved control shall be developed. Quasi-simultaneous combustion gas analysis at multiple locations inside the furnace shall be installed. Combustion gas analysis shall be introduced step-by-step to improve control of the air-fuel ratio. Programma(i) ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Argomento(i) D1 - Rolling: long products and reheating surfaces Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore Verein Deutscher Eisenhüttenleute eV Contributo UE Nessun dato Indirizzo Sohnstraße 65 40237 Düsseldorf Germania Mostra sulla mappa Costo totale Nessun dato Partecipanti (1) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Francia Contributo UE Nessun dato Indirizzo Voie Romaine - BP 320 57214 MAIZIERES-LES-METZ CEDEX Mostra sulla mappa Costo totale Nessun dato