Obiettivo In this joint research project, INSA, IRSID, BAM and BFI propose to improve and compare the methods of real-time radiography and automatic evaluation of X-ray photographs. The advantage of such systems is the objective and reproducible location of defects and their classification without the limitations of human judgement in interpreting X-ray photographs. The products to be inspected would be welds of thicknesses up to 60 mm and eventually hot and cold rolled plate (thickness range 0.2 mm to 3 mm) from various sources. The work, which will be coordinated among the four applicants, will be divided up as follows: - INSA will implement and test software with processing on an existing system; - IRSID will mainly carry out comparative tests with other means of non-destructive testing; - BAM will develop evaluation of the characteristic parameters of imaging devices; - BFI will work out the image processing algorithms. Programma(i) ECSC-STEELRES 7C - Medium-term guidelines (ECSC) "technical steel research", 1986-1990 Argomento(i) E1 - NDT technology and measurement Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore INSTITUT NATIONAL DES SCIENCES APPLIQUEES Contributo UE Nessun dato Indirizzo Avenue Albert Einstein 20 69621 VILLEURBANNE CEDEX Francia Mostra sulla mappa Costo totale Nessun dato Partecipanti (1) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Francia Contributo UE Nessun dato Indirizzo 34, rue de la Croix de Fer 78105 PARIS LA DEFENSE Mostra sulla mappa Costo totale Nessun dato