Obiettivo Forming simulations are necessary to prove the feasibility of the parts with steel sheets. The material models, which are used in the moment are probably not optimised for new steel grades (DP, CP, TRIP), but there are no measurements to get the material parameters for more advanced and more appropriate material models. The objective of this project is to get the material parameters for advanced material models as simple and effective as possible by means of optimisation algorithms. Programma(i) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Argomento(i) F4 - Thin sheets Invito a presentare proposte Data not available Meccanismo di finanziamento CSC - Cost-sharing contracts Coordinatore UNIVERSITÄT DORTMUND - FAKULTÄT MASCHINENBAU, LFU Contributo UE Nessun dato Indirizzo Baroper Strasse, 301 44221 DORTMUND Germania Mostra sulla mappa Costo totale Nessun dato Partecipanti (4) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto AUTOFORM ENGINEERING DEUTSCHLAND GMBH Germania Contributo UE Nessun dato Indirizzo Emil-Figgestraße 76 44227 DORTMUND Mostra sulla mappa Costo totale Nessun dato CORUS TECHNOLOGY BV Paesi Bassi Contributo UE Nessun dato Indirizzo 1970 CA IJMUIDEN Mostra sulla mappa Costo totale Nessun dato SOLLAC Francia Contributo UE Nessun dato Indirizzo Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX Mostra sulla mappa Costo totale Nessun dato THYSSEN KRUPP STAHL Germania Contributo UE Nessun dato Indirizzo Kaiser-Wilhelmstrasse 100 47166 DUISBURG Mostra sulla mappa Costo totale Nessun dato