Deliverables
The deliverable will be the final demonstration planned for month 36 of the project and an evaluation report that summarizes the results obtained during the test with the production processes at FIDAMC, MTorres and Danobat.
"Demonstration #2 and evaluation report"The deliverable will be the demonstration planned for month 24 of the project and an evaluation report that summarizes the results obtained during the test with the production processes at FIDAMC, MTorres and Danobat.
"Demonstration #1 and evaluation report"The deliverable will be the demonstration planned for month 12 of the project and an evaluation report that summarizes the results obtained during the tests with the simulations.
This deliverable will be the setup of the project’s web page.
Plan describing the collection and use of data in the project and in particular how and which data will be made available to other researchers after the end of the project.
Publications
Author(s):
Ana Rosa Rodriguez, Jose Cuenca, Rocio Ruiz, Alvaro Calero
Published in:
Congreso Nacional de Materiales Compuestos, Issue vol 2, no 2, 2017, 2018, Page(s) 128 - 131
Publisher:
ISSN 2531 - 0739
DOI:
10.5281/zenodo.1247421
Author(s):
Sebastian Zambal, Christian Eitzinger, Michael Clarke, John Klintworth, Pierre-Yves Mechin
Published in:
Conference on Industrial Informatics (INDIN), Issue 18th - 20th of July 2018, 2018
Publisher:
IEEE
DOI:
10.5281/zenodo.3354164
Author(s):
Sebastian Zambal, Christoph Heindl, Christian Eitzinger, Josef Scharinger
Published in:
Fourteenth International Conference on Quality Control by Artificial Vision, Issue May 2019, 2019, Page(s) 68, ISBN 9781-510630543
Publisher:
SPIE
DOI:
10.1117/12.2521739
Author(s):
Christian Eitzinger, Sebastian Zambal
Published in:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Issue 11th-13th September 2018, 2018
Publisher:
Society for the Advancement of Material and Process Engineering (SAMPE)
DOI:
10.5281/zenodo.3375400
Author(s):
S. Zambal, C. Heindl, C. Eitzinger
Published in:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Issue September 2019, 2019
Publisher:
SAMPE
DOI:
10.5281/zenodo.3381930
Author(s):
Sebastian Zambal; Christoph Heindl; Christian Eitzinger
Published in:
IEEE International Conference on Industrial Informatics (INDIN), Helsinki (Finland), 2019, Issue 22-25 July, 2019, 2019
Publisher:
IEEE
DOI:
10.5281/zenodo.3373641
Author(s):
Christian Eitzinger; Paulo Leitao; Salvador Izquierdo Estallo
Published in:
INDIN 2019 Call for papers: Innovative Technologies and Methods for Zero Defect Manufacturing on Industrial Cyber-Physical Systems Context, Issue 2, 2019
Publisher:
IEEE
DOI:
10.5281/zenodo.3354144
Author(s):
Pierre-Yves Mechin; Michael Clarke
Published in:
21ème Jounées Nationales sur les Composites(JNC), Issue 1-3 July, 2019, 2019
Publisher:
Société Francaise de Métallurgie et de Matériaux
DOI:
10.5281/zenodo.3354217
Author(s):
Helmut Zörrer, Robert Steringer, Sebastian Zambal, Christian Eitzinger
Published in:
9th IFAC Conference on Manufacturing Modeling, Management, and Control, Issue August 2019, 2019
Publisher:
IFAC
DOI:
10.5281/zenodo.3381943
Author(s):
Celine Le Gleuher, Christopher Buchmann, Katharina Schlegel, Alois Friedberger
Published in:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Issue September 2018, 2018
Publisher:
SAMPE
DOI:
10.5281/zenodo.3354175
Author(s):
Robert Steringer, Helmut Zörrer, Sebastian Zambal, Christian Eitzinger
Published in:
9th IFAC Conference on Manufacturing Modeling, Management, and Control, Issue August 2019, 2019
Publisher:
IFAC
DOI:
10.5281/zenodo.3381941
Searching for OpenAIRE data...
There was an error trying to search data from OpenAIRE
No results available