Resultado final
The deliverable will be the final demonstration planned for month 36 of the project and an evaluation report that summarizes the results obtained during the test with the production processes at FIDAMC, MTorres and Danobat.
"Demonstration #2 and evaluation report"The deliverable will be the demonstration planned for month 24 of the project and an evaluation report that summarizes the results obtained during the test with the production processes at FIDAMC, MTorres and Danobat.
"Demonstration #1 and evaluation report"The deliverable will be the demonstration planned for month 12 of the project and an evaluation report that summarizes the results obtained during the tests with the simulations.
This deliverable will be the setup of the project’s web page.
Plan describing the collection and use of data in the project and in particular how and which data will be made available to other researchers after the end of the project.
Publicaciones
Autores:
Ana Rosa Rodriguez, Jose Cuenca, Rocio Ruiz, Alvaro Calero
Publicado en:
Congreso Nacional de Materiales Compuestos, Edición vol 2, no 2, 2017, 2018, Página(s) 128 - 131
Editor:
ISSN 2531 - 0739
DOI:
10.5281/zenodo.1247421
Autores:
Sebastian Zambal, Christian Eitzinger, Michael Clarke, John Klintworth, Pierre-Yves Mechin
Publicado en:
Conference on Industrial Informatics (INDIN), Edición 18th - 20th of July 2018, 2018
Editor:
IEEE
DOI:
10.5281/zenodo.3354164
Autores:
Sebastian Zambal, Christoph Heindl, Christian Eitzinger, Josef Scharinger
Publicado en:
Fourteenth International Conference on Quality Control by Artificial Vision, Edición May 2019, 2019, Página(s) 68, ISBN 9781-510630543
Editor:
SPIE
DOI:
10.1117/12.2521739
Autores:
Christian Eitzinger, Sebastian Zambal
Publicado en:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Edición 11th-13th September 2018, 2018
Editor:
Society for the Advancement of Material and Process Engineering (SAMPE)
DOI:
10.5281/zenodo.3375400
Autores:
S. Zambal, C. Heindl, C. Eitzinger
Publicado en:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Edición September 2019, 2019
Editor:
SAMPE
DOI:
10.5281/zenodo.3381930
Autores:
Sebastian Zambal; Christoph Heindl; Christian Eitzinger
Publicado en:
IEEE International Conference on Industrial Informatics (INDIN), Helsinki (Finland), 2019, Edición 22-25 July, 2019, 2019
Editor:
IEEE
DOI:
10.5281/zenodo.3373641
Autores:
Christian Eitzinger; Paulo Leitao; Salvador Izquierdo Estallo
Publicado en:
INDIN 2019 Call for papers: Innovative Technologies and Methods for Zero Defect Manufacturing on Industrial Cyber-Physical Systems Context, Edición 2, 2019
Editor:
IEEE
DOI:
10.5281/zenodo.3354144
Autores:
Pierre-Yves Mechin; Michael Clarke
Publicado en:
21ème Jounées Nationales sur les Composites(JNC), Edición 1-3 July, 2019, 2019
Editor:
Société Francaise de Métallurgie et de Matériaux
DOI:
10.5281/zenodo.3354217
Autores:
Helmut Zörrer, Robert Steringer, Sebastian Zambal, Christian Eitzinger
Publicado en:
9th IFAC Conference on Manufacturing Modeling, Management, and Control, Edición August 2019, 2019
Editor:
IFAC
DOI:
10.5281/zenodo.3381943
Autores:
Celine Le Gleuher, Christopher Buchmann, Katharina Schlegel, Alois Friedberger
Publicado en:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Edición September 2018, 2018
Editor:
SAMPE
DOI:
10.5281/zenodo.3354175
Autores:
Robert Steringer, Helmut Zörrer, Sebastian Zambal, Christian Eitzinger
Publicado en:
9th IFAC Conference on Manufacturing Modeling, Management, and Control, Edición August 2019, 2019
Editor:
IFAC
DOI:
10.5281/zenodo.3381941
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles