Leistungen
The deliverable will be the final demonstration planned for month 36 of the project and an evaluation report that summarizes the results obtained during the test with the production processes at FIDAMC, MTorres and Danobat.
"Demonstration #2 and evaluation report"The deliverable will be the demonstration planned for month 24 of the project and an evaluation report that summarizes the results obtained during the test with the production processes at FIDAMC, MTorres and Danobat.
"Demonstration #1 and evaluation report"The deliverable will be the demonstration planned for month 12 of the project and an evaluation report that summarizes the results obtained during the tests with the simulations.
This deliverable will be the setup of the project’s web page.
Plan describing the collection and use of data in the project and in particular how and which data will be made available to other researchers after the end of the project.
Veröffentlichungen
Autoren:
Ana Rosa Rodriguez, Jose Cuenca, Rocio Ruiz, Alvaro Calero
Veröffentlicht in:
Congreso Nacional de Materiales Compuestos, Ausgabe vol 2, no 2, 2017, 2018, Seite(n) 128 - 131
Herausgeber:
ISSN 2531 - 0739
DOI:
10.5281/zenodo.1247421
Autoren:
Sebastian Zambal, Christian Eitzinger, Michael Clarke, John Klintworth, Pierre-Yves Mechin
Veröffentlicht in:
Conference on Industrial Informatics (INDIN), Ausgabe 18th - 20th of July 2018, 2018
Herausgeber:
IEEE
DOI:
10.5281/zenodo.3354164
Autoren:
Sebastian Zambal, Christoph Heindl, Christian Eitzinger, Josef Scharinger
Veröffentlicht in:
Fourteenth International Conference on Quality Control by Artificial Vision, Ausgabe May 2019, 2019, Seite(n) 68, ISBN 9781-510630543
Herausgeber:
SPIE
DOI:
10.1117/12.2521739
Autoren:
Christian Eitzinger, Sebastian Zambal
Veröffentlicht in:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Ausgabe 11th-13th September 2018, 2018
Herausgeber:
Society for the Advancement of Material and Process Engineering (SAMPE)
DOI:
10.5281/zenodo.3375400
Autoren:
S. Zambal, C. Heindl, C. Eitzinger
Veröffentlicht in:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Ausgabe September 2019, 2019
Herausgeber:
SAMPE
DOI:
10.5281/zenodo.3381930
Autoren:
Sebastian Zambal; Christoph Heindl; Christian Eitzinger
Veröffentlicht in:
IEEE International Conference on Industrial Informatics (INDIN), Helsinki (Finland), 2019, Ausgabe 22-25 July, 2019, 2019
Herausgeber:
IEEE
DOI:
10.5281/zenodo.3373641
Autoren:
Christian Eitzinger; Paulo Leitao; Salvador Izquierdo Estallo
Veröffentlicht in:
INDIN 2019 Call for papers: Innovative Technologies and Methods for Zero Defect Manufacturing on Industrial Cyber-Physical Systems Context, Ausgabe 2, 2019
Herausgeber:
IEEE
DOI:
10.5281/zenodo.3354144
Autoren:
Pierre-Yves Mechin; Michael Clarke
Veröffentlicht in:
21ème Jounées Nationales sur les Composites(JNC), Ausgabe 1-3 July, 2019, 2019
Herausgeber:
Société Francaise de Métallurgie et de Matériaux
DOI:
10.5281/zenodo.3354217
Autoren:
Helmut Zörrer, Robert Steringer, Sebastian Zambal, Christian Eitzinger
Veröffentlicht in:
9th IFAC Conference on Manufacturing Modeling, Management, and Control, Ausgabe August 2019, 2019
Herausgeber:
IFAC
DOI:
10.5281/zenodo.3381943
Autoren:
Celine Le Gleuher, Christopher Buchmann, Katharina Schlegel, Alois Friedberger
Veröffentlicht in:
Conference of the Society for the Advancement of Material and Process Engineering (SAMPE), Ausgabe September 2018, 2018
Herausgeber:
SAMPE
DOI:
10.5281/zenodo.3354175
Autoren:
Robert Steringer, Helmut Zörrer, Sebastian Zambal, Christian Eitzinger
Veröffentlicht in:
9th IFAC Conference on Manufacturing Modeling, Management, and Control, Ausgabe August 2019, 2019
Herausgeber:
IFAC
DOI:
10.5281/zenodo.3381941
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor