Improvement of strip flatness in tandem mills by means of axially movable rolls with special camber

Informations projet

N° de convention de subvention: 7215-EA-104

Projet clôturé

Date de début 1 Août 1984

Date de fin 31 Mars 1988

Financé au titre de

• Programme (ECSC) "pilot and demonstration projects in the iron and steel industry", 1983-1987

Coût total € 3 789 100,00

Contribution de l’UE € 1 515 600,00

Coordonné par

THYSSEN KRUPP NIROSTA GmbH
Germany

Objectif

This proposed research is an extension of project N° 7210-EA/104 entitled: "Improvement of strip flatness in tandem mills and skin-pass mill stands by means of axially movable rolls with special camber". The aim of the present work is to apply measurements of tension across the width of the strip desired from a measuring roll unit developed by ASEA to define all correcting elements - cambre, differential screw-down, lateral displacement, localised cooling - to achieve a good flatness in closed loop control on the 3rd and 4th stands of a tandem mill.

Programme(s)

• ECSC-STEELDEM 1C - Programme (ECSC) "pilot and demonstration projects in the iron and steel industry", 1983-1987

Thème(s)

• T3 - Rolling and product treatment

Appel à propositions

Data not available

Régime de financement

DEM - Demonstration contracts

Coordinateur

THYSSEN KRUPP NIROSTA GmbH

• Contribution de l’UE: Aucune donnée
• Adresse: Alleestrasse 165 ; 44793 BOCHUM ; Allemagne
• Coût total: Aucune donnée