Improvement of strip flatness in tandem mills by means of axially movable rolls with special camber

Informazioni relative al progetto

ID dell’accordo di sovvenzione: 7215-EA-104

Progetto chiuso

Data di avvio 1 Agosto 1984

Data di completamento 31 Marzo 1988

Finanziato da

• Programme (ECSC) "pilot and demonstration projects in the iron and steel industry", 1983-1987

Costo totale € 3 789 100,00

Contributo UE € 1 515 600,00

Coordinato da

THYSSEN KRUPP NIROSTA GmbH
Germany

Obiettivo

This proposed research is an extension of project N° 7210-EA/104 entitled: "Improvement of strip flatness in tandem mills and skin-pass mill stands by means of axially movable rolls with special camber". The aim of the present work is to apply measurements of tension across the width of the strip desired from a measuring roll unit developed by ASEA to define all correcting elements - cambre, differential screw-down, lateral displacement, localised cooling - to achieve a good flatness in closed loop control on the 3rd and 4th stands of a tandem mill.

Programma(i)

• ECSC-STEELDEM 1C - Programme (ECSC) "pilot and demonstration projects in the iron and steel industry", 1983-1987

Argomento(i)

• T3 - Rolling and product treatment

Invito a presentare proposte

Data not available

Meccanismo di finanziamento

DEM - Demonstration contracts

Coordinatore

THYSSEN KRUPP NIROSTA GmbH

• Contributo UE: Nessun dato
• Indirizzo: Alleestrasse 165 ; 44793 BOCHUM ; Germania
• Costo totale: Nessun dato