Fibre break models for designing novel composite microstructures and applications

Información del proyecto

FiBreMoD

Identificador del acuerdo de subvención: 722626

DOI

10.3030/722626

Proyecto cerrado

Fecha de la firma de la CE 16 Agosto 2016

Fecha de inicio 1 Octubre 2016

Fecha de finalización 30 Septiembre 2020

Financiado con arreglo a

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coste total

€ 3 370 807,44

Aportación de la UE

€ 3 370 807,44

Coordinado por

KATHOLIEKE UNIVERSITEIT LEUVEN
Belgium

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (3)

Best practices for measuring matrix, fibre and interfacial properties

Report describing best practices for measuring matrix, fibre and interfacial properties

The effect of voids on the mechanical properties of carbon fibre reinforced composites
Instructions for participants in the benchmarking exercise

Open Research Data Pilot (1)

Publication of the results of the benchmarking exercise

Websites, patent fillings, videos etc. (1)

Website up and running

Publicaciones

Peer reviewed articles (27)

The influence of 3D microstructural features on the elastic behaviour of tow-based discontinuous composites

Autores: Marco Alves, Soraia Pimenta
Publicado en: Composite Structures, Edición 251, 2020, Página(s) 112484, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2020.112484

Ultra-strong and stiff randomly-oriented discontinuous composites: Closing the gap to quasi-isotropic continuous-fibre laminates

Autores: M. Alves, D. Carlstedt, F. Ohlsson, L.E. Asp, S. Pimenta
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 132, 2020, Página(s) 105826, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.105826

A novel particle-filled carbon-fibre reinforced polymer model composite tailored for the application of digital volume correlation and computed tomography

Autores: E Schöberl, C Breite, S Rosini, Y Swolfs, MN Mavrogordato, I Sinclair, SM Spearing
Publicado en: Journal of Composite Materials, Edición -, 2021, Página(s) 002199832096638, ISSN 0021-9983
Editor: SAGE Publications
DOI: 10.1177/0021998320966388

Realising bio-inspired impact damage-tolerant thin-ply CFRP Bouligand structures via promoting diffused sub-critical helicoidal damage

Autores: Lorenzo Mencattelli, Silvestre T. Pinho
Publicado en: Composites Science and Technology, Edición 182, 2019, Página(s) 107684, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107684

Micro-CT based structure tensor analysis of fibre orientation in random fibre composites versus high-fidelity fibre identification methods

Autores: Radmir Karamov, Luca M. Martulli, Martin Kerschbaum, Ivan Sergeichev, Yentl Swolfs, Stepan V. Lomov
Publicado en: Composite Structures, Edición 235, 2020, Página(s) 111818, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2019.111818

Ultra-thin-ply CFRP Bouligand bio-inspired structures with enhanced load-bearing capacity, delayed catastrophic failure and high energy dissipation capability

Autores: Lorenzo Mencattelli, Silvestre T. Pinho
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 129, 2020, Página(s) 105655, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105655

Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness

Autores: Sébastien Joannès, Faisal Islam, Lucien Laiarinandrasana
Publicado en: Applied Composite Materials, Edición 27/3, 2020, Página(s) 165-184, ISSN 0929-189X
Editor: Kluwer Academic Publishers
DOI: 10.1007/s10443-020-09803-9

Combining digital image correlation with X-ray computed tomography for characterization of fiber orientation in unidirectional composites

Autores: Mahoor Mehdikhani, Christian Breite, Yentl Swolfs, Martine Wevers, Stepan V. Lomov, Larissa Gorbatikh
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 142, 2021, Página(s) 106234, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106234

Carbon fibre sheet moulding compounds with high in-mould flow: Linking morphology to tensile and compressive properties

Autores: Luca M. Martulli, Leen Muyshondt, Martin Kerschbaum, Soraia Pimenta, Stepan V. Lomov, Yentl Swolfs
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 126, 2019, Página(s) 105600, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105600

Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites

Autores: Ashok Rajpurohit, Sébastien Joannès, Vicky Singery, Philippe Sanial, Lucien Laiarinandrasana
Publicado en: Journal of Composites Science, Edición 4/1, 2020, Página(s) 6, ISSN 2504-477X
Editor: MDPI
DOI: 10.3390/jcs4010006

A thick-walled sheet moulding compound automotive component: Manufacturing and performance

Autores: L.M. Martulli, Thomas Creemers, Erich Schöberl, Nicholas Hale, Martin Kerschbaum, Stepan V. Lomov, Yentl Swolfs
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 128, 2020, Página(s) 105688, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105688

Herringbone-Bouligand CFRP structures: A new tailorable damage-tolerant solution for damage containment and reduced delaminations

Autores: Lorenzo Mencattelli, Silvestre T. Pinho
Publicado en: Composites Science and Technology, Edición 190, 2020, Página(s) 108047, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2020.108047

Morphology-induced fatigue crack arresting in carbon fibre sheet moulding compounds

Autores: Luca M. Martulli, Leen Muyshondt, Martin Kerschbaum, Soraia Pimenta, Stepan V. Lomov, Yentl Swolfs
Publicado en: International Journal of Fatigue, Edición 134, 2020, Página(s) 105510, ISSN 0142-1123
Editor: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105510

Bio-inspired design for enhanced damage tolerance of self-reinforced polypropylene/carbon fibre polypropylene hybrid composites

Autores: Lorenzo Mencattelli, Jun Tang, Yentl Swolfs, Larissa Gorbatikh, Silvestre T. Pinho
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 121, 2019, Página(s) 341-352, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.03.028

Microscale material variability and its effect on longitudinal tensile failure of unidirectional carbon fibre composites

Autores: Fabio Malgioglio, Soraia Pimenta, Anna Matveeva, Laszlo Farkas, Wim Desmet, Stepan V. Lomov, Yentl Swolfs
Publicado en: Composite Structures, Edición 261, 2021, Página(s) 113300, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2020.113300

Ply fragmentation in unidirectional hybrid composites linked to stochastic fibre behaviour: A dual-scale model

Autores: Francisco Mesquita, Yentl Swolfs, Stepan V. Lomov, Larissa Gorbatikh
Publicado en: Composites Science and Technology, Edición 181, 2019, Página(s) 107702, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107702

Fibre-direction strain measurement in a composite ply under quasi-static tensile loading using Digital Volume Correlation and in situ Synchrotron Radiation Computed Tomography

Autores: E. Schöberl, C. Breite, A. Melnikov, Y. Swolfs, M.N. Mavrogordato, I. Sinclair, S.M. Spearing
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 137, 2020, Página(s) 105935, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.105935

A computationally-efficient micromechanical model for the fatigue life of unidirectional composites under tension-tension loading

Autores: Marco Alves, Soraia Pimenta
Publicado en: International Journal of Fatigue, Edición 116, 2018, Página(s) 677-690, ISSN 0142-1123
Editor: Elsevier BV
DOI: 10.1016/j.ijfatigue.2018.05.017

Multi-instrument multi-scale experimental damage mechanics for fibre reinforced composites

Autores: Stepan V Lomov, Christian Breite, Delphine Carrella-Payan, Valter Carvelli, Nuri Ersoy, Marco Gigliotti, Raquel Antoranz Gonzalez, Sergey Ivanov, Malika Kersani, Marie-Christine Lafarie-Frenot, Mark Mavrogordato, Mahoor Mehdikhani, Arsen Melnikov, Francisco Mesquita, Fatih Oz, Yannick Pannier, Lincy Pyl, Erich Schöberl, Ian Sinclair, S Mark Spearing, Yentl Swolfs, Danny Van Hemelrijk, Man Zhu, La
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 406, 2018, Página(s) 012057, ISSN 1757-899X
Editor: IOP Publishing
DOI: 10.1088/1757-899X/406/1/012057

Fibre direction strain measurement in a composite ply under pure bending using Digital Volume Correlation and Micro-focus Computed Tomography

Autores: Erich Schöberl, MN Mavrogordato, I Sinclair, SM Spearing
Publicado en: Journal of Composite Materials, Edición 54/14, 2020, Página(s) 1889-1912, ISSN 0021-9983
Editor: SAGE Publications
DOI: 10.1177/0021998320918648

Void growth measurement and modelling in a thermosetting epoxy resin using SEM and tomography techniques

Autores: Jan Rojek, Christian Breite, Yentl Swolfs, Lucien Laiarinandrasana
Publicado en: Continuum Mechanics and Thermodynamics, Edición 32/2, 2020, Página(s) 471-488, ISSN 0935-1175
Editor: Springer Verlag
DOI: 10.1007/s00161-020-00865-5

A dataset of micro-scale tomograms of unidirectional glass fiber/epoxy and carbon fiber/epoxy composites acquired via synchrotron computed tomography during in-situ tensile loading

Autores: Mahoor Mehdikhani, Christian Breite, Yentl Swolfs, Martine Wevers, Stepan V. Lomov, Larissa Gorbatikh
Publicado en: Data in Brief, Edición 34, 2021, Página(s) 106672, ISSN 2352-3409
Editor: Elsevier BV
DOI: 10.1016/j.dib.2020.106672

Weld lines in tow-based sheet moulding compounds tensile properties: Morphological detrimental factors

Autores: L.M. Martulli, Martin Kerschbaum, Stepan V. Lomov, Yentl Swolfs
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 139, 2020, Página(s) 106109, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106109

Engineering tensile behavior of hybrid carbon fiber/self-reinforced polypropylene composites by bio-inspired fiber discontinuities

Autores: Jun Tang, Yentl Swolfs, Arya Aslani, Lorenzo Mencattelli, Gianmaria Bullegas, Silvestre T. Pinho, Stepan V. Lomov, Larissa Gorbatikh
Publicado en: Composites Part B: Engineering, Edición 178, 2019, Página(s) 107502, ISSN 1359-8368
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2019.107502

Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites

Autores: C. Breite, A. Melnikov, A. Turon, A.B. de Morais, F. Otero, F. Mesquita, J. Costa, J.A. Mayugo, J.M. Guerrero, L. Gorbatikh, L.N. McCartney, M. Hajikazemi, P.P. Camanho, R.P. Tavares, S.V. Lomov, S. Pimenta, W. Van Paepegem, Y. Swolfs
Publicado en: Composites Science and Technology, Edición 202, 2021, Página(s) 108555, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2020.108555

Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup

Autores: Faisal Islam, Sébastien Joannès, Steve Bucknell, Yann Leray, Anthony Bunsell, Lucien Laiarinandrasana
Publicado en: Journal of Reinforced Plastics and Composites, Edición 39/3-4, 2020, Página(s) 144-162, ISSN 0731-6844
Editor: SAGE Publications
DOI: 10.1177/0731684419873712

State-of-the-art models for mechanical performance of carbon-glass hybrid composites in wind turbine blades

Autores: Yentl Swolfs, Babak Fazlali, Arsen Melnikov, Francisco Mesquita, Vincent Feyen, Christian Breite, Larissa Gorbatikh, Stepan V Lomov
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 942, 2020, Página(s) 012005, ISSN 1757-899X
Editor: IOP Publishing
DOI: 10.1088/1757-899x/942/1/012005

Thesis and dissertations (1)

Effet de la porosité dans les réservoirs composites à parois épaisses : Observations expérimentales et modélisation numérique

Autores: Rojek, Jan
Publicado en: "Mechanics of materials [physics.class-ph]. English. ⟨NNT : 2020UPSLM015⟩", Edición 11, 2020
Editor: Université Paris sciences et lettres

Conference proceedings (27)

Direct Comparison of the Fibre Break Development in Unidirectional Carbon Fibre Composites Under Tension Predicted by Statistical Models and Measured Using 4D In-situ SRCT

Autores: CHRISTIAN BREITE, ARSEN MELNIKOV, FRANCISCO MESQUITA, LARISSA GORBATIKH, STEPAN V. LOMOV, YENTL SWOLFS
Publicado en: American Society for Composites 2020, Edición proceedings of the American Society for Composites 2020, 2020, ISBN 978-1-60595-665-7
Editor: DEStech Publications, Inc.
DOI: 10.12783/asc35/34971

Improvements in Determination of Carbon Fibre Strength Distribution Using Automation and Statistical Data

Autores: Islam, Faisal; Bucknell, Steve; Leray, Yann; Bunsell, Anthony; Laiarinandrasana, Lucien; Joannès, Sébastien
Publicado en: Fiber Society's Spring 2018 Conference, Edición Jun 2018, 2018
Editor: The Fiber society

Effect of through-thickness compressive stress and porosity on the tensile strength of carbon-fibre reinforced composites

Autores: Rojek, Jan; Joannès, Sébastien; Teissedre, Jean-Christophe; Laiarinandrasana, Lucien; Bunsell, Anthony
Publicado en: ICCM 22 - 22nd International Conference on Composite Materials, Edición Aug 2019,, 2019
Editor: ICCM22 (digital)

Manufacturing and performance of hybrid fabric reinforcements and their composites

Autores: Rajpurohit, Ashok; Singery, Vicky; Joannès, Sébastien; Sanial, Philippe; Laiarinandrasana, Lucien
Publicado en: ECCM 18 - 18th European Conference on Composite Materials, Edición Jun 2018, 2018, Página(s) 8
Editor: ECCM18

Effect of the time-dependent load on type IV cylinders using a multi-scale model

Autores: Widjaja MP, Alves M, Mavrogordato M, Joannès S, Bunsell A, Mair GW, and Thionnet A
Publicado en: Proceeding of the Proceeding of the 8th International Conference on Hydrogen Safety (ICHS 8), Edición September 2019, 2019
Editor: ICHS 8

Modelling an Improved NOL Ring Test Using a Reduced Volume Method for the Characterisation of Composite Cylinders

Autores: Widjaja, Martinus P.; Joannès, Sébastien; Bunsell, Anthony R.; Mair, Georg; Thionnet, Alain
Publicado en: ICCM 22 - 22nd International Conference on Composite Materials, Edición Aug 2019, 2019
Editor: ICCM22 9digital0

Mapping strains and fibre fracture in carbon fibre composites using in situ digital volume correlation

Autores: Schöberl E, Breite C, Melnikov A, Swolfs Y, Mavrogordato MN, Sinclair I
Publicado en: Proceedings of the 22nd International conference on Composite Materials (ICCM-22), Edición August 2019, 2019
Editor: ICCM22 (digital)

Effect of input properties on the predicted failure of a composite pressure vessel using a multiscale model

Autores: Widjaja, Martinus,; Islam, Faisal; Joannès, Sébastien; Bunsell, Anthony; Mair, G.; Thionnet, Alain
Publicado en: FiBreMoD Conference, KU Leuven, Edición Dec 2019, 2019
Editor: FiBreMoD (digital)

Predictions of carbon fibre sheet moulding compound (CF-SMC) mechanical properties based on local fibre orientation

Autores: Martulli LM, Alves M, Pimenta S, Hine PJ, Kerschbaum M, Lomov SV, Swolfs Y
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición 2018, 2018
Editor: ECCM18 digital

Adaptation of Weibull analysis to represent strength behaviour of brittle fibres

Autores: Islam, Faisal; Joannès, Sébastien; Bunsell, Anthony; Laiarinandrasana, Lucien
Publicado en: ICCM 22 - 22nd International Conference on Composite Materials, Edición Aug 2019, 2019
Editor: ICCM22 (digital)

Ply fragmentation in interlayer hybrid composites modelled directly from the fibre break statistics

Autores: Mesquita F, Swolfs Y, Lomov SV, Gorbatikh L
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athens, 24-28 June 2018, 2018
Editor: ECCM 18

Prediction of tensile stiffness and failure of carbon fibre composite laminate: a multi-scale non-deterministic approach

Autores: Malgioglio F, Matveeva A, Swolfs Y, Farkas L
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athens, 24-28 June 2018, 2018
Editor: ECCM 18

Low Velocity Impact and Compression After Impact of thin-ply CFRP Bouligand Structures

Autores: Mencattelli L, Pinho ST
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athens, 24-28 June 2018, 2018
Editor: ECCM 18

Modelling the effect of porosity on the mechanical properties of unidirectional composites. The case of thick-walled pressure vessels

Autores: Rojek J, Joannès S, Mavrogordato M, Laiarinandrasana L, Bunsell A, Thionnet A
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athens, 24-28 June 2018, 2018
Editor: ECCM 18

Manufacturing and performance of hybrid fabric reinforcements and their composites

Autores: Rajpurohit A, Singery V, Joannès S, Sanial P, Laiarinandrasana L
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athens, 24-28 June 2018, 2018
Editor: ECCM 18

Do transverse cracks affect in-situ strength and fibre breaks distribution in longitudinal plies of cross-ply laminates?

Autores: Melnikov A, Swolfs Y, Lomov SV, Gorbatikh L
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athens, 24-28 June 2018, 2018
Editor: ECCM 18

The application of a reduced volume method for the simulation of the characterisation of a carbon fibre pressure vessel

Autores: Widjaja MP, Joannès S, Bunsell A, Mair G, Thionnet A
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athens, 24-28 June 2018, 2018
Editor: ECCM 18

Defining a Reduced Volume Zone for the Simulation of Burst Test on a Composite Pressure Vessels

Autores: Widjaja MP, Joannès S, Bunsell A, Mair G, Thionnet A
Publicado en: Proceeding of the 8th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2018), Edición Tarbes, France, 28-31 August 2018, 2018
Editor: ICSAAM 2018

Towards accurate and efficient single fibre characterization to better assess failure strength distribution

Autores: Islam F, Joannes S, Bucknell S, Leray Y, Bunsell A, Laiarinandrasana L
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athens, 24-28 June 2018, 2018
Editor: ECCM 2018

Analysing the effect of fibre waviness on the stiffness of tow-based discontinuous composites

Autores: Alves M, Pimenta S
Publicado en: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Edición Athenes, 24-28 June 2018, 2018
Editor: ECCM 18

Pushing the boundaries of carbon fibre sheet moulding compounds: application to thick automotive components

Autores: Martulli LM, Creemers T, Kerschbaum M, Lomov SV, Swolfs Y
Publicado en: SAMPE Europe 2019, Edición September 2019 (digital), 2019
Editor: SAMPE Europe

Ultra-Thin and Stiff Randomly-Oriented Discontinuous Composites

Autores: MARCO ALVES, DAVID CARLSTEDT, LEIF ASP, FREDRIK OHLSSON, SORAIA PIMENTA
Publicado en: American Society for Composites 2019, Edición Proceedings of the American Society for Composites 2019, 2019, ISBN 978-1-60595-602-2
Editor: DEStech Publications, Inc.
DOI: 10.12783/asc34/31369

Material parameter identification challenge and procedure for intra-laminar damage prediction in unidirectional CFRP

Autores: Malgioglio F, Carrella-Payan D, Magneville B, Farkas L
Publicado en: Proceedings of the Composites2017, Edición September 2017, 2017
Editor: n/a

Characterization and statistical analysis of single fiber strength of fibers at various processing stages

Autores: Rajpurohit, Ashok; Joannès, Sébastien; Islam, Faisal; Singery, Vicky; Bucknell, Steve; Laiarinandrasana, Lucien
Publicado en: ICCM 22 - 22nd International Conference on Composite Materials,, Edición Aug 2019, 2019
Editor: ICCM22 (digital)

Tensile properties of single carbon fibres tested with automated equipment

Autores: Mesquita F, Swolfs Y, Leray Y, Bucknell S, Lomov SV, Gorbatikh L
Publicado en: 22nd International conference on Composite Materials (ICCM-22), Edición August 2019, 2019
Editor: ICCM22 (digital)

Development and performance evaluation of inter-ply and intra-ply hybrid fabric reinforcements and their composites

Autores: Rajpurohit, Ashok; Singery, Vicky; Joannès, Sébastien; Sanial, Philippe; Laiarinandrasana, Lucien
Publicado en: ICRACM 2019 - 6th International Conference on Recent Advances in Composite Materials, Edición 25–28 February 2019, 2019
Editor: ICRACM-2019

Enhancing the damage tolerance of SRPP/CFPP hybrid composites via a bio-inspired design

Autores: Mencattelli L, Tang J, Swolfs Y, Gorbatikh L, Pinho ST
Publicado en: ICCM22 - 22nd International Conference on Composite Materials, Edición August 2019, 2019
Editor: ICCM22 (digital)